Feb 05, 2020
An excellence centre for “Design and Manufacturing” that bridges the gap between fundamental research and their advanced applications to industry.
Associate Professor, Mechanical Engineering Department, University of Alberta, Director and Founder of Smart & Sustainable Manufacturing Systems Laboratory (SMART Lab) & Aquaponics 4.0 Learning Factory (AllFactory). Office: 10-326 DICE Building, 9211 116 Street, NW, T6W2R3, Edmonton.
David Baca graduated from SMART Lab is Reseach Associate and Lab Manager.
Jennifer Cardenas, Project Coordinator, research in robotics and inclusive technologies.
Dr. Roberto Monroy, postdoc, working on Plastic4.0: Engineering and Recycling.
Dr. Ateeq Ur Rehman, postdoc, plant science and paramaters optimization in Hydroponics.
Afia Rasool, PhD student, research on generative design for construction.
Yifan Guo, PhD student, research in Topology Optimization and Additive Manufacturing.
Feiyu Jia, PhD student, research in robot-based machine tending applications.
Mohammad Alghamdy, PhD student, research in production optimization and improvement.
Junaid Tahir, PhD student, research in machine learning tools for waste-to-energy process.
Umar Shareef, PhD student, research on knowledge modeling for Aquaponics systems.
Guru Ratan, MSc. student, research additive metal manufacturig automation.
Jessica Cisneros-Gonzalez, MSc. student, research in Construction simulation and robotics.
Kristyna Kvapilova, MSc. student, research in system design in additive manufacturing.
Aiman Saif, undergrad coop student, research on dodo technology for visually impaired kids.
Eric voisin, undergrad coop student, research on portable hydroponic system.
Owen Cooke, undergrad coop student, research on software for Additive Manufacturing.
Sami Jagirdar, undergrad coop student, research on video and content development for plastic recycling.
Sean Hand undergrad coop student, research on design for Additive Manufacturing.
Stevie Desmarais, undergrad coop student, research in design of robotic simulation game.
Daniel Asimiakwini, undergrad research student, research in app design for autnomous repair.
Kai Wu, undergrad coop student, research in injection molding for mask manufacturing.
Dhir Bid, undergrad coop student, research in job scheduling for additive manufacturing.
Orlane Ndeugueu is an ELITE Internee at LIMDA for the summer 2021.
Jordan Plunkett is an ELITE Internee at LIMDA for the summer 2021.
Rakshanda Alam was a WISEST Internee at LIMDA for the summer 2019.
Jennifer Peterson is WISEST Internee at LIMDA for the summer 2017.
Alan Garcia, was MSc visiting student from Tecnologico de Monterrey (Mexico).
Ayush Mohanty was a visiting undergrad studet from IIT Mombay, India.
Sayda was undergrad student visited from University of Monterrey, Mexico.
Asma Mansoura, undergrad student, visited from Polytechnique de Tunisie, Tunisia.
Dr. Muhammad Tufail, completed his Postdoc from SMART Lab in August 2023.
Dr. Zahra Samadikhoshkho, completed her Postdoc from SMART Lab in August 2023.
Dr. Rabiya Abbasi, completed her PhD from SMART Lab in September 2022.
Dr. Palwasha Afsar, postdoc, Working on computer-vision applications in construction.
Dr. Jiangzhuo Ren, completed his PhD and Postdoc in SMART Lab in July 2022.
Syed Abreez Gillani, graduated as MSc from SMART Lab in July 2022.
Emanuel Martinez, graduated as MSc from SMART Lab in September 2022.
Dr. Pablo Martinez, completed his PhD and postdoc from LIMDA in Sept 2021.
Harshavardhan Mamledesai, graduated as an MSc. from LIMDA in January 2021.
Dr. Mohammad Abdelghani, graduated as a PhD from LIMDA (Construction 4.0).
Dr. Mana Aziziderouei was a Postdoc researcher (AM) in LIMDA in 2020.
Dr. Jikai Liu was a Postdoc researcher (topology optimization) in LIMDA in 2019.
Juan Ramos, graduated as MSc student (mobile robotics) from LIMDA in 2020
Mario Soriano graduated in 2019 as an MSc student, worked on IoT technology for Industry 4.0.
David Baca graduated in 2019 as an MSc. student, worked on hybrid multi-material 3D Printing.
Saraswati Jituri graduated as an MSc student in 2018, worked on Hybrid Lean-ERP systems development.
Nabeel Malik graduated as an MSc student in 2018, worked on the hardware & software interfacing.
Shi An graduated in 2019 as an MSc student, worked on manufacturability assessment using BIM models.
Pedro Yepez, graduated in 2019, developed a framework for automated maintenance plan generation.
Anas Itani graduated as an MSc student in 2019, worked on Design for X (DFX) tools.
Chong Zhang, undergrad researcher was workig in design and prototype a mobile robotic platform.
Cole Masse, undergrad student, was working in mechatronics systems for Industry 4.0.
Yining Liu, undergrad student, was researching in design and development in 3D Printing nozzle.
Bowen, undergrad student, was researching in Lego-based 3D printing technologies.
Mingjie Han, undergrad student, was researcher in controller design for 3D Printers.
Tianshuo Liang, undergrad student, was researcher in design of 3D printing nozzle for multi-materials.
Jing, undergrad student, was researcher on multi-material nozzle system for 3D Printing.