Publications

  1. Kabarchuk, N., Bessa, G. M., and Nobes, D. S. (2021). Ex-Vivo Heart Perfusion Flow Meter. 23rd Annual Alberta Biomedical Engineering Conference. October 21-22nd, 2022. Banff, AB, Canada. (1 page abstract)

  2. Azadi, R. and Nobes, D.S. (2022) Ultra-High-Speed Imaging for Determining Pressure in a Cavitating Water Flow With the Addition of Drag-Reducing Agents, 20th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 11-14 July 2022 Lisbon Portugal (10 pages)

  3. Bessa, G. M., Hadfield, J., Nobes, D. S. (2022). Near-wall fluid mechanics of a pulsatile flow through a compliant tube. 20th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 11-14 July 2022 Lisbon, Portugal. (13 pages)

  4. Kashanj, S., Saffar, Y., Sabbagh R., and Nobes D.S. Calculation Of The Nusselt Number From Temperature And Velocity Data Obtained From Enhanced 3D Two-Colour LIF And 3D PTV In A Rayleigh-Benard Convection Cell. 20th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 11-14 July 2022 Lisbon, Portugal. (9 pages)

  5. Saffar, Y., Nobes, D.S., and Sabbagh, R.. Investigating the Flow Structure of Dean Vortices in a Curved Microchannel, Implementing 3D-µPTV Using FVM and Near Wall Data Refinement. 20th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, 11-14 July 2022 Lisbon, Portugal. (9 pages)

  6. Bessa, G. M., Hadfield, J., Gopinath, S., Freed. D. H., Nobes, D. S. (2022). Impact of Non-Newtonian Droplet on a Liquid Surface. In Proceedings of the Canadian Society for Mechanical Engineering International Congress 2022, CSME Congress 2022, June 5-8, 2022, Edmonton, AB, Canada. (Abstract)

  7. Der, J., Bessa, G. M., Nobes, D. S. (2022). An Active Stereo Vision Method to Measure Distensibility of Ex-Vivo Heart Perfusion Compliant Chambers. In Proceedings of the Canadian Society for Mechanical Engineering International Congress 2022, CSME Congress 2022, June 5-8, 2022, Edmonton, AB, Canada. (Abstract)

  8. Plamondon, C, Bessa, G. and Nobes, D.S. (2022) An Unsteady Flowmeter for Pulsatile Flow, Proceedings of the Canadian Society for Mechanical Engineering International Congress 2022, June 5-8, 2022, Edmonton, AB, Canada (5 Pages)

  9. Saffar, Y., Nobes, D.S. and Sabbagh, R. (2022) Experimental Analyzes Of Capsules’ Behaviour In A Curved Microchannel, Proceedings of the Canadian Society for Mechanical Engineering International Congress 2022, June 5-8, 2022, Edmonton, AB, Canada (4 pages)

  10. Bessa, G. M., Hadfield, J., Jen, N., Chung, H., Gopinath, S., Freed. D. H., Nobes, D. S. (2021). Effect of material compliance properties of a mock aorta on the generated pressure waveforms for an ex-vivo heart perfusion (EVHP) system. 22nd Annual Alberta Biomedical Engineering Conference. BME Conference October 22-23rd, 2021. Banff, AB, Canada. (1 page abstract)

  11. Der, J., Cameron, K., Cruz Antunes, S. Jee, C., Sabbagh, R. and Nobes, D.S. (2021), Use of Active Stereo Vision to Measure Regional Lung Distension During Ex-Vivo Lung Perfusion, 22nd Annual Alberta Biomedical Engineering Conference. BME Conference October 22nd , 2021 (1 page abstract)

  12. Hasanovich L. and Nobes, D.S., Investigation of effect of heat exchanger size on power output in low-temperature difference Stirling engines, 19th International Stirling Engine Conference, Rome, Italy, Sep. 2021, p. 14. doi: https://doi.org/10.1051/e3sconf/202131303002. (14 pages)

  13. M. Lottmann, de Rouyan, Z., Hasanovich, L., Middleton, S.M.W., Nicol-Seto, M., Speer, C. and Nobes, D.S. Development of a 100-Watt-Scale Beta-Type Low Temperature Difference Stirling Engine Prototype, 19th International Stirling Engine Conference, Rome, Italy, Sep. 2021, p. 15. doi: https://doi.org/10.1051/e3sconf/202131308004. (15 Pages)

  14. Azadi, R. and Nobes, D.S. (2021) Pressure calculation for flows with moving surface boundaries from particle tracking velocimetry (PTV), 14th International Symposium on Particle Image Velocimetry, Chicago, USA 1-4 Aug 2021 (ONLINE) (2 pages)

  15. Hadfield, J., Bessa, G.M. and Nobes, D.S. (2021) Near-wall fluid mechanics of pulsatile flow through compliant tubing, 14th International Symposium on Particle Image Velocimetry, Chicago, USA 1-4 Aug 2021 (ONLINE) (2 pages)

  16. Kashanj, S. and Nobes, D.S. (2021) Application of Simultaneous Time-Resolved 3-D PTV and Two-colour LIF in Studying Rayleigh-Benard Convection, 14th International Symposium on Particle Image Velocimetry, Chicago, USA 1-4 Aug 2021 (ONLINE) (2 pages)

  17. Ma, L., Kashanj, S., Xu, S. Ye, M. and Nobes, D.S. (2021) Flow characteristics analysis for flow past the porous spheres: wake structures and drag force coefficients, 14th International Symposium on Particle Image Velocimetry, Chicago, USA 1-4 Aug 2021 (ONLINE) (2 pages)

  18. Saffer, Y., Ansari, A., Azadi, R., Raffel, J., Nobes, D.S. and Sabbagh, R. (2021) Determination of the Near Wall Flow of a Multi-Stage Tesla Diode Using PIV and PTV 4th International Symposium on Particle Image Velocimetry, Chicago, USA 1-4 Aug 2021 (ONLINE) (2 pages)

  19. Bessa, G., Hadfield, J., Chung H-J, Sabbagh R., Freed, D.H. and Nobes, D.S. (2020) Experimental Investigation Of The Effect Of Compliance Properties On The Flow In An Analogous Ex-Vivo Heart Perfusion System, Proceedings of the Canadian Society for Mechanical Engineering International Congress 2021, June 27-30, 2021, Charlottetown, PE, Canada (ONLINE) (6 pages)

  20. Hasanovich, L. and Nobes, D.S. (2021) Investigations into the effect of heat exchanger volume and geometry on low-temperature Stirling engine performance, Proceedings of the Canadian Society for Mechanical Engineering International Congress 2021, June 27-30, 2021, Charlottetown, PE, Canada (ONLINE) (6 pages)

  21. Kashanj, S. and Nobes, D.S. (2021) Investigation Into The Onset Of Turbulent Rayleigh-Benard Convection Using Time-Resolved 2-D Particle Image Velocimetry, Proceedings of the Canadian Society for Mechanical Engineering International Congress 2021, June 27-30, 2021, Charlottetown, PE, Canada (ONLINE) (5 pages)

  22. Lottmann, M, de Rouyan, Z., Hasanovich, L., Middleton, S.M.W., Nicol-Seto, M., Speer, C. and Nobes, D.S. (2020) Early Development of a 100 Watt Low Temperature Difference Stirling Engine, Proceedings of the Canadian Society for Mechanical Engineering International Congress 2021, June 27-30, 2021, Charlottetown, PE, Canada (ONLINE) (6 Pages)

  23. Middleton, S.M.W. and Nobes, D.S. (2021) Approximations for use in cycling thermodynamic systems: Applications for Stirling engines, Proceedings of the Canadian Society for Mechanical Engineering International Congress 2021, June 27-30, 2021, Charlottetown, PE, Canada (ONLINE) (6 Pages)

  24. Nicol-Seto, M. and Nobes, D.S. (2021) Performance of a Modified Drive Mechanism on a Low Temperature Differential Stirling Engine, Proceedings of the Canadian Society for Mechanical Engineering International Congress 2021, June 27-30, 2021, Charlottetown, PE, Canada (ONLINE) (6 pages)

  25. de Rouyan, Z., Speer, C. and Nobes, D.S. (2021) Preliminary Design of a Hollow Displacer for a Low Temperature Difference Stirling Engine, Proceedings of the Canadian Society for Mechanical Engineering International Congress 2021, June 27-30, 2021, Charlottetown, PE, Canada (ONLINE) (6 Pages)

  26. Bessa, G., Hadfield, J., Nicolson, K., Chung H-J, Sabbagh R., Freed, D.H. and Nobes, D.S. (2020) Optimization of ex-vivo heart perfusion (EVHP) systems and the effect of compliance properties on the flow, 21st Alberta Biomedical Engineering Conference, Banff, 1 page abstract, October 23rd, 2020 (ONLINE)

  27. Der, J., Cameron, K., Cruz Antunes, S. Jee, C., Sabbagh, R. and Nobes, D.S. (2020), A Computer Vision Method for Dynamic Compliance Measurement in Ex Vivo Lung Perfusion, 12th Alberta Biomedical Engineering Conference, Banff, 1 page abstract, October 23rd, 2020 (ONLINE)

  28. Palichuk, B., Cameron, K., Cruz Antunes, S. Jee, C., Sabbagh, R. and Nobes, D.S. (2020), Optimization of pulsatile flowmeter for use in ex-vivo heart perfusion device, 12th Alberta Biomedical Engineering Conference, Banff, 1 page abstract, October 23rd, 2020 (ONLINE)

  29. Yusuf, Y., Roostaei, M., Soroush, M., Rosi, G., Berner, K., Tegegne, N., Mohammadtabar, F., Izadi, H., Zhu, D., Mahmoudi, M., Fattahpour, V., and Nobes, D.S., (2021) “Single and Multi-Phase Flow Loop Testing for Characterization and Optimization of Flow Control Devices Used in SAGD: The Effect of Viscosity and Gas-to-Liquid Ratio on Tool Performance”, In SPE Thermal Integrity and Design Symposium. OnePetro. January 2021. Paper Number: SPE-203865-MS Banff, Canada, Virtual. (20 pages)

  30. Nobes D. S. (2020) “I've Gotten My First CFD Simulation Running, Now What Do I Do?”, 3DEXPERIENCE WORLD 2020, Nashville, Tenn., USA, February 9-12, 2020

  31. Bukharin, N., El Hassan, M., Nobes, D.S., and Omelyanyuk, M. (2019) ‘Reducing Energy Consumption during Bitumen Separation from Oil Sand’, The 6th International Conference on Power and Energy Systems Engineering (CPESE 2019), September 20-23, 2019, Okinawa, Japan

  32. Kamble, P., Ansari, S. and Nobes, D.S. (2019) ‘Prediction of the calcium carbonate growth rate in a vertical slot due to the effect of pressure drop’, 13th International Symposium on Particle Image Velocimetry – ISPIV 2019, Munich, Germany, July 22-24, 2019

  33. Hadfield, J. and Nobes, D.S. (2019) ‘High-Speed Tomographic Measurements of Pulsatile Flows within Compliant Tubes’, 13th International Symposium on Particle Image Velocimetry – ISPIV 2019, Munich, Germany, July 22-24, 2019

  34. Azadi, R. and Nobes, D.S. (2019) ‘On the detachment mechanisms of monodisperse bubbles flowing through a wavy channel’, 13th International Symposium on Particle Image Velocimetry – ISPIV 2019, Munich, Germany, July 22-24, 2019

  35. Ansari, S. and Nobes, D.S. (2019) ‘Effect of the pore geometry on pressure distribution within a bubble penetrating a single pore’, 13th International Symposium on Particle Image Velocimetry – ISPIV 2019, Munich, Germany, July 22-24, 2019

  36. Yusuf, Y., Ansari, S., Sabbagh, R. and Nobes, D.S. (2019) ‘Pressure field calculation from streamline behavior in the flow through adjacent rectangular orifices’, 13th International Symposium on Particle Image Velocimetry – ISPIV 2019, Munich, Germany, July 22-24, 2019

  37. H. Wang, D. S. Nobes, W. H. Finlay, and R. Vehring (2019) ‘Increasing particle surface roughness as a promising strategy to improve colloidal stability of pharmaceutical suspensions’, presented at the Respiratory Drug Delivery, Lisbon, Portugal, May 7-10, 2019.

  38. H. Wang, D. S. Nobes, W. H. Finlay, and R. Vehring (2019) ‘Agitation method affects colloidal stability of pharmaceutical suspensions’, presented at the Respiratory Drug Delivery, Lisbon, Portugal, May 7-10, 2019.

  39. Nicol-Seto, M.E., and Nobes, D.S. (2019) ‘Evaluation Of A Low Temperature Stirling Engine Using A Discontinuous Thermodynamic Cycle’, Proceedings of the 4th Thermal and Fluid Engineering Conference, TFEC-2019-28089, Las Vegas, USA, April 14-17, 2019

  40. Middleton, S.M.W., and Nobes, D.S. (2019) ‘Modular one-dimensional simulation tool for oscillating flow and thermal networks in Stirling engines’, Proceedings of the 4th Thermal and Fluid Engineering Conference, TFEC-2019-28495, Las Vegas, USA, April 14-17, 2019

  41. Li, S. and Nobes, D.S. (2019) ‘Study of system parameters on pump performance with the effect of aortic compliance’, Proceedings of the 4th Thermal and Fluid Engineering Conference, TFEC-2019-28082, Las Vegas, USA, April 14-17, 2019

  42. Kinsale L., Yusuf Y., Ansari S. and Nobes, D.S. (2019) ‘Fines migration in the near-inlet region of a flow entering a narrow slot through a porous medium’, Proceedings of the 4th Thermal and Fluid Engineering Conference, TFEC-2019-28076, Las Vegas, USA, April 14-17, 2019

  43. Kamble, P. and Nobes, D.S. (2019) ‘Investigation of the effect of pressure drop on calcium carbonate deposition rate in a vertical slot’, Proceedings of the 4th Thermal and Fluid Engineering Conference, TFEC-2019-28079, Las Vegas, USA, April 14-17, 2019

  44. Yusuf Y., Kinsale L., Ansari S. and Nobes, D.S. (2019) ‘The convergent path of streamlines for the flow approaching a rectangular orifice through a porous region’, Proceedings of the 4th Thermal and Fluid Engineering Conference, TFEC-2019-28074, Las Vegas, USA, April 14-17, 2019

  45. Mendez, C. and Nobes, D.S. (2019) ‘Investigation of the velocity field of a free jet issuing from a high aspect-ratio slot’, Proceedings of the 4th Thermal and Fluid Engineering Conference, TFEC-2019-28070, Las Vegas, USA, April 14-17, 2019

  46. Nobes D. S. (2019) “Automating the Assessment of Drawings: An Approach Using the API”, SOLIDWORKS WORLD 2019, Dallas, Texas, USA, Feb 10th – 13th, 2019

  47. Ansari S., Yusuf Y., Kinsale L., Sabbagh R., and Nobes D.S. (2018) “Visualization of fines migration in the flow entering apertures through the near-wellbore porous media”, 2018 SPE Thermal Well Integrity and Design Symposium, Banff, Canada, Nov 27-29, 2018

  48. Stumpf, C., Hunt, A.J. and Nobes, D.S. (2018) Effect of Scaling Up Low Temperature Differential Stirling Engines, 18th ISEC International Stirling Engine Conference, Tainan, Taiwan, Sept 19-21, 2018

  49. Nicol-Seto, M., Michaud, J., Middleton, S., and Nobes, D.S. (2018) Non-Traditional Drive Mechanism Designs for the Improvement of Heat Transfer in Low Temperature Differential Stirling Engines,18th ISEC International Stirling Engine Conference, Tainan, Taiwan, Sept 19-21, 2018

  50. Middleton, S. and Nobes, D.S. (2018) Dynamic Modelling of Low Temperature Stirling Engines, 18th ISEC International Stirling Engine Conference, Tainan, Taiwan, Sept 19-21, 2018

  51. Speer, C., Miller, D. and Nobes, D.S. (2018) Performance of ST05G-CNC Stirling Engine Modified for Operation with Reduced Source Temperature, 18th ISEC International Stirling Engine Conference, Tainan, Taiwan, Sept 19-21, 2018

  52. Ansari S., Yusuf Y., Sabbagh R., Soltani H., Kinsale L. and Nobes D. S. (2018) “An imaging derivation of the pressure field of a multi-phase flow in a porous media using µ-SPIV”, 19th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon Portugal, July 16-19, 2018

  53. Hadfield, J. and Nobes, D.S. (2017) “An Epipolar Triangular Connectivity Processing Approach of Multi-Focused Plenoptic Images for Time-Resolved 3D Particle Tracking in Micro-Scale Flows”, 19th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon Portugal, July 16-19, 2018

  54. Azadi R., Soltani H., Sabbagh R. and Nobes D. S. (2018) “Experimental and numerical investigation of bubble dynamics rising through a rectangular confinement”, 5th International Conference on Experimental Fluid Mechanics – ICEFM 2018 Munich, Munich, Germany, July 2-4, 2018

  55. El Hassan M., Hunt A.J., Nobes D. S. (2018) “Experimental investigation of the vortex dynamics in circular jet impinging on rotating disk”, 5th International Conference on Experimental Fluid Mechanics – ICEFM 2018 Munich, Munich, Germany, July 2-4, 2018

  56. Kinsale L. and Nobes D.S. (2018) “The study of flow through porous media within the near-slot region of SAGD operations using PSV”, 5th International Conference on Experimental Fluid Mechanics – ICEFM 2018 Munich, Munich, Germany, July 2-4, 2018

  57. Kazemi M.A., Sabbagh R., Kinsale L., Soltani H. and Nobes D. S. (2018) “3D Flow measurement using particle tracking velocimetry (PTV) in porous media”, 5th International Conference on Experimental Fluid Mechanics – ICEFM 2018 Munich, Munich, Germany, July 2-4, 2018

  58. Soltani H., Azadi R., Baldygin A., Ansari S., and Nobes D. S. (2018) “Developing quantitative information of oil droplets rising through a rectangular confinement” , 5th International Conference on Experimental Fluid Mechanics – ICEFM 2018 Munich, Munich, Germany, July 2-4, 2018

  59. Ansari S., Sabbagh R., Soltani H. and Nobes D. S. (2018) “Flow visualization of a droplet penetration through a porous media in SAGD process using μPIV”, 5th International Conference on Experimental Fluid Mechanics – ICEFM 2018 Munich, Munich, Germany, July 2-4, 2018

  60. Ansari S., Bayans M., Rasimarzabadi F. and Nobes D.S. (2018) “Flow visualization of the Newtonian and non-Newtonian behavior of fluids in a Tesla-diode valve”, 5th International Conference on Experimental Fluid Mechanics – ICEFM 2018 Munich, Munich, Germany, July 2-4, 2018

  61. Yusuf Y., Ansari S., Bayans M., Sabbagh R., El Hassan M. and Nobes D. S. (2018) “Study of Flow Convergence in Rectangular Slots using Particle Shadowgraph Velocimetry”, 5th International Conference on Experimental Fluid Mechanics – ICEFM 2018 Munich, Munich, Germany, July 2-4, 2018

  62. Jee, C.C., Salata, G.B.P., Nobes, D.S. and Duke, K.K. (2018) “Investigating the Effect of a Speckle Pattern on Measurement Uncertainty in a Three-Dimensional Digital Image Correlation (3D-DIC) System”, Proceedings of The Canadian Society for Mechanical Engineering International Congress 2018, May 27-30, 2018, Toronto, On, Canada

  63. Nobes D. S. (2018) “Educating undergrad students in solid modeling: success in the CSWA”, SOLIDWORKS WORLD 2018, Los Angles, Cal, USA, Feb 5th – 8th 2018

  64. Soltani, H. Hadfield, J. and Nobes, D.S. (2017) "Developing Quantitative Information From Shadowgraph Images of Air Bubbles Passing Through a Mini-Slot", Second International Symposium on Image based Metrology (ISIMet), Hawaii, USA, 16-21 Dec 2017

  65. Hadfield, J. Soltani, H. and Nobes, D.S. (2017) "Applications of Plenoptic PTV: A Single-Camera Time-Resolved Three-Dimensional Fluid Flow Measurement Technique", Second International Symposium on Image based Metrology (ISIMet), Hawaii, USA, 16-21 Dec 2017

  66. Ansari, S., Sabbagh, R. and Nobes, D.S. (2017) "Flow visualization and pressure calculation of electrokinetically driven flows through slots in SAGD process", 67th Canadian Chemical Engineering Conference, Edmonton, Alberta, Canada, Oct 22-25, 2017

  67. Sabbagh, R., Ansari, S., and Nobes, D.S. (2017) "Investigation of the transport of fines in porous media using a refractive index matching technique", 67th Canadian Chemical Engineering Conference, Edmonton, Alberta, Canada, Oct 22-25, 2017

  68. Rasimarzabadi, F., Mendez, C. and Nobes, D.S. (2017) "Effect of Reynolds number on jet flow out of a high aspect ratio rectangular slot using stereo-PIV", 67th Canadian Chemical Engineering Conference, Edmonton, Alberta, Canada, Oct 22-25, 2017 (Poster)

  69. Sabbagh, R., Waghmare, P.R. and Nobes, D.S. (2017) "The effect of rheology on the measured velocity in capillary tubes", 67th Canadian Chemical Engineering Conference, Edmonton, Alberta, Canada, Oct 22-25, 2017

  70. Soltani, H., Sabbagh, R. and Nobes, D.S. (2017) "Quantifying Air Bubble Characteristics Rising Through a Mini-Slot inside a Rectangular Flow Channel Using Shadow Image Velocimetry", 67th Canadian Chemical Engineering Conference, Edmonton, Alberta, Canada, Oct 22-25, 2017

  71. Yusuf, Y., Sabbagh, R., Baldygin, A. and Nobes, D.S. (2017) "Flow Of Viscous Fluid Through A Rectangular Slot In The Presence Of Porous Media At The Inlet", 67th Canadian Chemical Engineering Conference, Edmonton, Alberta, Canada, Oct 22-25, 2017

  72. Ansari, S., Sabbagh, R. and Nobes, D.S. (2017) "Flow Visualization Through Long Aspect Ratio Slots And Migration Of Particles In The Presence Of Electric Field", Okanagan Fluid Dynamics Meeting, Kelowna, British Columbia, Canada, Aug 22-23, 2017

  73. Bravo, B. and Nobes, D.S. (2017) "Developing Quantitative Information About Pressure Drop In A Flow Passing Through A Vertical Slot", Okanagan Fluid Dynamics Meeting, Kelowna, British Columbia, Canada, Aug 22-23, 2017

  74. Kinsale, L. and Nobes, D.S. (2017) "The Development Of An Online System To Measure Sand Production Through Thin Slots In SAGD Operations Using PSV", Okanagan Fluid Dynamics Meeting, Kelowna, British Columbia, Canada, Aug 22-23, 2017

  75. Mendez, C. and Nobes, D.S. (2017) "Flow Visualization For Subsonic Compressible Flow Through High Aspect Ratio Rectangular Orifices", Okanagan Fluid Dynamics Meeting, Kelowna, British Columbia, Canada, Aug 22-23, 2017

  76. Michaud, J., Miller, D., Speer, C. and Nobes, D.S. (2017) "Dimensionless Heat Transfer Correlations Of Finned-Tube Radiators In Fully Reversed Oscillating Flow", Okanagan Fluid Dynamics Meeting, Kelowna, British Columbia, Canada, Aug 22-23, 2017

  77. Rasimarzabadi, F. and Nobes, D.S. (2017) "The Flow Characteristics Of A Jet Exiting A High Aspect Ratio Slot", Okanagan Fluid Dynamics Meeting, Kelowna, British Columbia, Canada, Aug 22-23, 2017

  78. Sabbagh, R. and Nobes, D.S. (2017) "In Situ Measurement Of The Refractive Index Of A Suspension For Flow Experiments", Okanagan Fluid Dynamics Meeting, Kelowna, British Columbia, Canada, Aug 22-23, 2017

  79. Soltani, H. and Nobes, D.S. (2017) "Shadowgraph Imaging to Quantify Air Bubble Rising Velocity as Passing Through a Rectangular Flow Cell with a Mini-Slot", Okanagan Fluid Dynamics Meeting, Kelowna, British Columbia, Canada, Aug 22-23, 2017

  80. Speer, C., Miller, D. and Nobes, D.S. (2017) "Preliminary Model Validation For A Gamma Type Stirling Engine", Okanagan Fluid Dynamics Meeting, Kelowna, British Columbia, Canada, Aug 22-23, 2017

  81. Stumpf, C., Middleton, S. and Nobes, D.S. (2017) "Heat Transfer In Oscillating Fluid Flow Through Parallel Flat Plate Channel Heat Exchangers", Okanagan Fluid Dynamics Meeting, Kelowna, British Columbia, Canada, Aug 22-23, 2017

  82. Yusuf, Y., Sabbagh, R. and Nobes, D.S. (2017) "Flow Convergence Model For Flow Through Long Aspect Ratio Rectangular Orifices", Okanagan Fluid Dynamics Meeting, Kelowna, British Columbia, Canada, Aug 22-23, 2017

  83. Sabbagh, R. Hasanovich, L., Baldygin, A., Nobes, D.S. and Waghmare, P.R. (2017) ‘Capillarity of Non-Newtonian Fluids’, ICFMHTT 2017: 19th International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics, Venice, Italy during June, 21-22, 2017

  84. Speer, C.P., Michaud, J.P., Miller, D.A., Stumpf, C.J.A. and Nobes, D.S. (2017) ‘Empirical heat transfer correlations of finned-tube heat exchangers in oscillating flow for low temperature Stirling engines’, ICFMHTT 2017: 19th International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics, Venice, Italy during June, 21-22, 2017

  85. Soltani, H., Redmond, M. and Nobes, D.S. (2017) ‘Observation of the flow behavior for a rising droplet in a mini-slot’, ICFMHTT 2017: 19th International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics, Venice, Italy during June, 21-22, 2017

  86. Hadfield, J. and Nobes, D.S. (2017) ‘Implementation of focused plenoptic time-resolved 3D-PTV in the analysis of a vortex flow’, Proceedings of the 2nd Thermal and Fluid Engineering Conference, TFEC2017-18384, Las Vegas, USA, April 2-5, 2017

  87. Ansari, S., Sabbagh, R., Rasimarzabadi, F., Leitch, M., Waghmare, P.R., and Nobes, D.S. (2017) ‘Visualization of an electrokinetic driven flow through mini-channels in SAGD wells’, Proceedings of the 2nd Thermal and Fluid Engineering Conference, TFEC2017-18389, Las Vegas, USA, April 2-5, 2017

  88. Yusuf, Y., Baldygin, A., Sabbagh, R., Leitch, M., Waghmare, P.R., and Nobes, D.S. (2017) ‘Effect of aspect ratio on pressure loss and characteristics of low Reynolds number flow through narrow slots’, Proceedings of the 2nd Thermal and Fluid Engineering Conference, TFEC2017-18387, Las Vegas, USA, April 2-5, 2017

  89. Rasimarzabadi, F., Ghaemi, S., Ansari, S., Leitch, M., and Nobes, D.S. (2017) ‘Measurement of the flow field out of high aspect ratio slots’, Proceedings of the 2nd Thermal and Fluid Engineering Conference, TFEC2017-18390, Las Vegas, USA, April 2-5, 2017

  90. Soltani, H., Rasimarzabadi, F., Leitch, M., and Nobes, D.S. (2017) ‘Effect of bubbles size passing through mini-slot in a SAGD process using particle shadow velocmetry (PSV)’, Proceedings of the 2nd Thermal and Fluid Engineering Conference, TFEC2017-18388, Las Vegas, USA, April 2-5, 2017

  91. Cameron, K., Freed, D.H. and Nobes, D.S. (2017) ‘Time-resolved PIV of the pulsatile flow field downstream of a mock aorta in an ex vivo heart perfusion model’, Proceedings of the 2nd Thermal and Fluid Engineering Conference, TFEC2017-18385, Las Vegas, USA, April 2-5, 2017

  92. Breakey, D., Agrawal YK, Amini, P., Ghaemi, S., Nobes, D.S., Sanders, S.R. (2016) Particle Image Velocimetry for turbulence modulation analysis in concentrated, high-Reynolds-number solid–liquid flows, ICMF-2016 – 9th International Conference on Multiphase Flow, May 22nd-27th, Florence, Italy. (6 pages)

  93. Breakey, D., Agrawal YK, Amini, P., Ghaemi, S., Nobes, D.S., Sanders, S.R. (2016) Particle Image Velocimetry for turbulence modulation analysis in concentrated, high-Reynolds-number solid–liquid flows, ICMF-2016 – 9th International Conference on Multiphase Flow, May 22nd-27th, Florence, Italy. (6 pages)

  94. Cameron, K., Freed, D.H. and Nobes, D.S. (2016) “Time-resolved PIV of the pulsatile flow from an ex vivo heart perfusion model”, 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon Portugal, July 4-7, 2016 (12 pages)

  95. Hadfield, J. and Nobes, D.S. (2016) “Calibration of Plenoptic 2.0 Cameras and use in 3DPTV Investigations”, 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon Portugal, July 4-7, 2016 (12 pages)

  96. Kazemi M A, Elliott J A. W. and Nobes, D.S. (2016) “Determination of the three components of velocity in an evaporating liquid from scanning PIV”, 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon Portugal, July 4-7, 2016 (16 pages)

  97. Nobes D. S.* (2016) Solid modeling: training new users in an undergraduate engineering program, SOLIDWORKS WORLD 2016, Dallas, Texas, USA, Jan 31st – Feb 3rd 2016

  98. Agrawal YK, Shokri R, Sanders RS, Nobes DS (2015) Turbulence statistics in solid-liquid flow using a refractive index matching and particle image velocimetry technique 10th Pacific Symp on Flow Visualization and Image Processing, June 2015. Naples.

  99. Ansari S, Rashid Md A I, Chatterjee O, Waghmare PR, Ma Y and DS Nobes (2015) Visualization of the viscous effects of non-Newtonian fluids flowing in mini-channels, 10th Pacific Symp on Flow Visualization and Image Processing, June 2015. Naples, Italy.

  100. Ansari S, Rashid Md A I, Waghmare P R, Ma Y and DS Nobes (2015) Newtonian and non-Newtonian flows through micro scale orifices, 10th Pacific Symp on Flow Visualization and Image Processing, June 2015. Naples, Italy.

  101. Kazemi M A, Elliott J A. W. and Nobes DS (2015) A 3D flow visualization in evaporation of water from a meniscus at low pressures, 10th Pacific Symp on Flow Visualization and Image Processing, June 2015. Naples, Italy.

  102. Rashid Md A I, Ansari S, Waghmare P R, and DS Nobes (2015) Capillary filling of Non-Newtonian fluids, 10th Pacific Symp on Flow Visualization and Image Processing, June 2015. Naples, Italy.

  103. Melenka, G.W., G.W., Hoxha, S., Nobes, D.S., Carey, J.P. (2015) Analytical and Experimental Analysis of Tubular Braided Composites, CANCOM 2015, Edmonton Alberta, 1-8

  104. Nobes D. S. *, M. Bussiere, and C. R. Koch. (2015) The vortex field behind a single and tandem flapping airfoil. 10th Pacific Symp on Flow Visualization and Image Processing, page 19, 15-18 June 2015. Naples, Italy.

  105. Shokri, R., Ghaemi, S., Nobes, D.S., Sanders, S.R. (2015) Experimental Investigation of Particles Turbulence in a High Reynolds Vertical Pipe Flow, CANCAM 2015, May 31-June 4, London Ontario, Canada.

  106. Baldygin, A., Nobes, D.S., and Mitra, S.K. (2014) "Oil recovery from porous media using emulsion", ASME 2014 International Mechanical Engineering Congress & Exposition, Montreal, Quebec, Canada (submitted)

  107. Sabbagh, R., Lipsett, M.G., Koch, C.R. and Nobes, D.S. (2014) "Hydrocyclone performance comparison under the influence of underflow pumping", FPS2014: European Conference on Fluid-Particle Separation 2014, October 15-17, 2014, Lyon, France (2 pages)

  108. Sabbagh, R., Lipsett, M.G., Koch, C.R. and Nobes, D.S. (2014) "Theoretical and experimental study of hydrocyclone performance and equivalent settling area", ASME 2014 International Mechanical Engineering Congress, November 14-20, Montreal, Canada (10 pages)

  109. Nobes, D.S., Chatterjee, O. and Setayeshgar, A (2014) "Plenoptic Imaging for 3D?PTV Investigations of Micro-Scale Flows", 17th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon Portugal, July 7-10, 2014 (13 pages)

  110. Milne, Andrew JB; Fleck, Brian; Nobes, David; Sen, Debjyoti; Amirfazli, Alidad (2013) "Drag on Sessile Drops", Bulletin of the American Physical Society, Vol 58.

  111. Vali, A., Nobes, D.S. Kostiuk, L.W. (2014), "Effects of wall material on energy transport of laboratory-scale methanol pool fire", Proceeding of Combustion Institute, Canadian Section, Windsor, ON

  112. Breton, K.M., Fleck, B.A. and Nobes, D.S. (2013) "The Effect of Superheat on the Performance Characteristics of a Flash Atomized Spray", 25th European Conference on Liquid Atomization and Spray Systems - ILASS2013, Chania Crete, 1-4 Sept 2013 (6 pages)

  113. Melenka, G.W., Nobes, D.S., Carey, J.P., 3D DIC Measurement of Tubular Braided Composites, 19th International Conference on Composite Materials (2013) (Accepted May 15, 2013)

  114. Sen, D., Balzan, M., Fleck, B.A. and Nobes, D.S. (2013) "Influence of pressure surge on bubble generation and spray steadiness in an effervescent atomizer", 25th European Conference on Liquid Atomization and Spray Systems - ILASS2013, Chania Crete, 1-4 Sept 2013 (6 pages)

  115. Setayeshgar, A., Lipsett, M.G., Koch, C.R. and Nobes, D.S. (2013) "Measurement of particle dynamics in a coherent acoustic field", 10th International Symposium On Particle Image Velocimetry - PIV13 Delft, The Netherlands, July 2-4, 2013 (6 pages)

  116. Vali, A., Nobes, D.S. Kostiuk, L.W. (2013) "Flow Visualization within the Liquid Phase of Pool Fire", 10th International Symposium On Particle Image Velocimetry - PIV13 Delft, The Netherlands, July 2-4, 2013 (6 pages)

  117. Kazemimanesh, M., Kostiuk, L.W., Nobes, D.S., Olfert, J.S. and Johnson, M.R. (2013) "Investigation and Characterization of the Effects of Distilled Water, Salt Water, and Hydrochloric Acid Solution on Flare Particulate and Gas Phase Emissions", The Combustion Institute, Canadian Section, Spring Technical Meeting, Laval, Canada. May 13-16, 2013 (6 pages)

  118. Vali, A., Nobes, D.S. Kostiuk, L.W. (2013), "Convection within the Liquid Phase of Methanol Pool Fire", The Combustion Institute, Canadian Section, Spring Technical Meeting, Laval, Canada. May 13-16, 2013 (6 pages)

  119. Setayeshgar, A., Lipsett, M.G., Koch, C.R. and Nobes, D.S. (2012) "Investigation of separation of particles in a multi-wavelength macro chamber using an ultrasonic acoustic standing wave", 10th Ultrasonic Standing Network Conference, USWNet 2012, Lund, Sweden, September 21-22. (2 pages)

  120. Baldygin, A., Nobes, D.S., and Mitra, S.K. (2012) "Novel technique for core flooding experiments", The Canadian Society for Mechanical Engineers (CSME) Forum. Winnipeg, Canada, June 4 - 6, 2012. (6 pages)

  121. Bussiere, M.J., Nobes, D.S., and Koch, C.R. (2012) "A combinatorial vortex detection and characterization algorithm for 2C2D PIV data", 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon Portugal, July 9-12, 2012 (23 pages)

  122. Kotchon, A.C., Nobes, D.S. and Lipsett, M.G. (2012) "Haul Truck Tire Condition Monitoring Using Optical Techniques" Proceedings of the Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, London, UK, 11-13 June 2012

  123. Kotchon, A.C., Lipsett, M.G. and Nobes, D.S. (2012) "Optical Strain Measurement for Fault Detection in Haul Truck Tires." Proceedings of the 25th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2012), Huddersfield, UK, 18-20 June 2012

  124. Leung C.K., Melenka G., Nobes D.S. and Carey J.P., (2012) "Validation of DIC as an Effective Tool for Composite Tubular Braid Characterization", The Canadian Society for Mechanical Engineers (CSME) Forum. Winnipeg, Canada, June 4 - 6, 2012.

  125. Melenka G.W., Leung, C., Nobes, D.S., Carey, J.P., (2012), Experimental Analysis of Tubular Braided Composites for Catheter Design, 13th Annual Alberta Biomedical Engineering Conference October 20, 2012

  126. Melenka, G.W., Carey, J.P. and Nobes, D.S., (2012) Three Dimensional Deformation of Orthodontic Brackets (2012), The Canadian Society for Mechanical Engineers (CSME) Forum. Winnipeg, Canada, June 4 - 6, 2012.

  127. Sen, D., Nobes, D.S., and Mitra, S.K. (2012) "Statistical analysis of velocity fields obtained from an experimental study of flow within micro-porous media", Proceedings of ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels ICNMM2012, Purerto Rico, USA July 8-12, 2012 (7 pages).

  128. Stephen, A., Nobes, D.S., and Mitra, S.K. (2012) "Core-flooding experiment for the bioconversion of coal to methane", The Canadian Society for Mechanical Engineers (CSME) Forum. Winnipeg, Canada, June 4 - 6, 2012.

  129. Vaghar Anzabi, R., Nobes, D.S. and Lipsett, M.G. (2012) "Optical Strain Measurement for Fault Detection in Haul Truck Tires." Proceedings of the 25th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2012), Huddersfield, UK, 18-20 June 2012

  130. Vali, A., Nobes, D.S. Kostiuk, L.W. (2012), "Effects of Altering the Liquid Phase Boundary Conditions of Methanol Pool Fires", 34th International Symposium on Combustion July 29-August 3, 2012 Warsaw University of Technology, Poland. (Poster)

  131. Vali, A., Nobes, D.S. Kostiuk, L.W. (2012), "The Effects of Boundary Conditions on Temperature Distribution within a Methanol Pool Fire", The Combustion Institute, Canadian Section, Spring Technical Meeting, Toronto, Canada. May 13-16, 2012

  132. Waghmare, P.R., Sen, D., Nobes, D.S., and Mitra, S.K. (2012) "Experimental investigation of the flow front behind a liquid-air interface for capillary flow", Proceedings of ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels ICNMM2012, Purerto Rico, USA July 8-12, 2012
  133. Waghmare, P.R., Ahmad,F., Nobes, D.S., and Mitra, S.K. (2011) “Tracking of capillary interface in microfluidic channels”, ASME- 2011 International Mechanical Engineering Congress and Exposition, Denver, Colorado, USA, 11-17 November, 2011

  134. Setayeshgar, A., Lipsett, M.G., Koch, C.R. and Nobes, D.S. (2011) “Investigating the particles motion in ultrasonic acoustic wave field using PIV/PTV”, International Congress of Ultrasonics, Gdańsk, Poland, 5-8 September, 2011.

  135. Nobes, D.S., Carey,J., Toogood, R.W., Major, P. (2011) “In Vitro Testing Of Orthodontic Brackets Using Imaging Techniques”, 2011 Canadian Association of Physicists - Memorial University of Newfoundland, St. John's, Newfoundland, 17th June 2011.

  136. Vali, A., Nobes, D.S. Kostiuk, L.W. (2011), “Temperature Measurements within a Methanol Pool Fire”, The Combustion Institute Canadian Section Spring Technical Meeting, Winnipeg, Canada. May 8-11, 2011

  137. Vali, A., Nobes, D.S. Kostiuk, L.W. (2011), “Temperature Measurements within a Methanol Pool Fire”, 10th International Symposium on Fire Safety Science, University of Maryland, USA, 19-24 June 2011

  138. Lipsett, M.G., Vaghar Anzabi, R., Kotchon, A., Nobes, D.S. (2011) “Detection Detection of Faults in Pneumatic Tires for Off-Road Haul Trucks”, Proceedings BINDT Condition Monitoring Conf, Cardiff Wales, June 20-22, 2011.

  139. Bussiere, M, Nobes, D.S. and Koch, C.R. (2011) “Study of the Effect of Inlet Conditions on the Near-Field Structure of an Axisymmetric Jet using Tomographic PIV”, 23rd Canadian Congress of Applied Mechanics (CANCAM’11), Vancouver, British Columbia, Canada, June 5th – June 9th, 2011

  140. Ahmad, F. and Nobes, D.S. (2011) “A novel scanning molecular tagging velocimetry technique for two dimensional microfluidic applications”, Proceedings of the 9th International Conference on Nanochannels, Microchannels, and Minichannels ICNMM2011 June 19-22, 2011, Edmonton, Alberta, Canada

  141. Sen, D., Nobes, D.S., Bhattacharjee, S., Mitra, S.K. (2011) “Optical measurement of the relative motion of a spherical particle in a micro-capillary”, Proceedings of the 9th International Conference on Nanochannels, Microchannels, and Minichannels ICNMM2011 June 19-22, 2011, Edmonton, Alberta, Canada

  142. Geoghegan, P.H., Jermy, M.C., Nobes, D.S. and Buchmann N. (2010) “Flow field and surface displacement in flexible silicone models of stenosed arteries”, 17th Australasian Fluid Mechanics Conference, Auckland, New Zealand, 5–9 December, 2010

  143. Abdolrazaghi, M. and Nobes, D.S. (2010) “Investigation of the 3D velocity field of a segmented flow utilizing a novel 3C3D micro-PIV approach”, Proceedings of the 2010 International Mechanical Engineering Congress and Exposition IMECE2010 November 12-18, 2010, Vancouver, British Columbia, Canada

  144. Ahmad, F., Abdolrazaghi, M., and Nobes, D.S. (2010) “A comparison of 2-d molecular tagging velocimetry (MTV) and micro particle image velocimetry (μPIV) for microscale flows”, Proceedings of the 2010 International Mechanical Engineering Congress and Exposition IMECE2010 November 12-18, 2010, Vancouver, British Columbia, Canada

  145. Sen, D., Abdolrazaghi, M., Nobes, D.S., Mitra, S.K. (2010) “Investigation Of Interstitial Velocity Field Inside Micro-Porous Media”, Proceedings of the 2010 International Mechanical Engineering Congress and Exposition IMECE2010 November 12-18, 2010, Vancouver, British Columbia, Canada

  146. Tan, A.W., Nobes, D.S., Fleck, B.A. and Flynn, M.R. (2010) “Partial Depth Gravity Currents in Two-layer Stratified Media. Part 1: A Study of the Wave Amplitude”, International Conference on Environmental Science and Engineering, Singapore August 25-27, 2010

  147. Ayranci, I, Machado, M.B., Derksen, J.J., Nobes, D.S., Kresta, S.M. (2010) “Effect of Geometry on the Mechanisms for Off-Bottom Solids Suspension”, AIChE North American Mixing Forum XXII, June 20-25, 2010, Victoria, BC, Canada.

  148. Madej, A.M., Babazadeh, H., and Nobes, D.S. (2010) “On mode identification and characterization of a precessing jet using tomographic particle image velocimetry” The Canadian Society for Mechanical Engineers (CSME) Forum, Victoria, British Columbia, Canada, June 7-9, 2010

  149. Comyn, G., Nobes, D.S. and Fleck, B.E. (2010) “Performance evaluation and wake study of a micro wind turbine”, The Canadian Society for Mechanical Engineers (CSME) Forum, Victoria, British Columbia, Canada, June 7-9, 2010

  150. Nobes, D.S., Duke, K.K. and Mertiny P. (2010) “On the influence of solid modeling on design innovation in junior mechanical engineering design courses”, Canadian Engineering Education Association Inaugural Conference, Queen’s University, Kingston, ON, Canada, June 7-9, 2010

  151. Nobes, D.S., Stout, C. and Ackerman, M. (2010) “The Impact of Senior Design Project Workload on Student Performance”, 3rd International Symposium for Engineering Education, Cork Ireland, 1-2 July 2010

  152. Vali, A., Nobes, D.S. Kostiuk, L.W. (2010), “Effects of Thermal Boundary Condition on Burning Rate in a Pool Fire”, The Combustion Institute Canadian Section Spring Technical Meeting, Ottawa, Canada. May 9-12, 2010

  153. Nobes, D.S., Abdolrazaghi, M. and Homeniuk, D.L.N. (2010) “Three-component, three-dimensional velocity measurement technique for micro-channel applications using a scanning µPIV”, 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon Portugal, July 5-8, 2010.

  154. Madej, A.M., Babazadeh, H., and Nobes, D.S. (2010) “On the comparison of the chamber exit flow field of a precessing jet using StereoPIV and TomoPIV”, 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon Portugal, July 5-8, 2010.

  155. Geoghegan, P.H., Buchmann, N., Jermy, M.C., Nobes, D.S. Spence, C. and Docherty, P. D. (2010) “SPIV and image correlation measurements of surface displacement during pulsatile flow in models of compliant, stenosed arteries”, 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon Portugal, July 5-8, 2010.

  156. Lacoursiere, R., Nobes, D.S., Carey, J., Major, P.W. and Heo, G. “Torque Expression and Bracket Deformation of the Orthos Bracket System”, IADR/AADR/CADR 87th General Session and Exhibition, Miami, FL, USA, April 1-4, 2009. 1 page Refereed Abstract and Poster

  157. Machado, M., Joaquim, C., Nobes, D.S. Nunhez, J.R., Kresta, S.M. (2009) "Impeller Comparison Protocol: KPC and PBTD Impellers" AIChE Annual Meeting, Nashville, USA November 8-13 2009

  158. Machado, M., Joaquim, C., Nobes, D.S. Nunhez, J.R., Kresta, S.M. (2009) “Determination of the Characteristics of PBT and KPC Impellers” 8th World Congress of Chemical Engineering, Montreal Quebec, Canada August 23-27 2009

  159. Evans, M.D., Nobes, D.S. and Lipsett, M.G. (2009) “Design of an Experimental Apparatus for Determining the Effects of Acoustic Stimulation on the Rheological Properties of Oils and Multi-Phase Fluids”, 22nd Canadian Congress of Applied Mechanics (CANCAM’09), Halifax, Nova Scotia, Canada, May 31st – June 4th, 2009

  160. Madej, A.M. and Nobes, D.S. (2009) “Study of the Effect of Inlet Conditions on the Near-Field Structure of an Axisymmetric Jet using Tomographic PIV”, 22nd Canadian Congress of Applied Mechanics (CANCAM’09), Halifax, Nova Scotia, Canada, May 31st – June 4th, 2009

  161. Torres, L.A., Fleck, B.A, Wilson, D.J., Nobes, D.S. (2009) “A calibration method for PLIF measurements for use scalar mixing studies using water jets”, The Combustion Institute Canadian Section Spring Technical Meeting, May 10-13, 2009, Montréal, Quebec, Canada

  162. Evans, M.D., Nobes, D.S., Lipsett, M.G. (2008) “Rheology of Dense Multiphase Slurries for In-Situ Oil Sands Fragmentation”, MITACS 2nd Annual Canada-France Congress. Montreal, QC. June 1-5, 2008. 1 page Refereed Abstract and Poster

  163. Evans, M.D., Nobes, D.S., Lipsett, M.G. (2008) “Rheology of Dense Multiphase Slurries for In-Situ Oil Sands Fragmentation”, Imperial Oil Centre for Oil Sands Innovation Conference "At the Interface from Mining to In-Situ." Canmore, AB. May 7-10, 2008. 1 page Refereed Abstract and Poster

  164. Ghaemi, S, Nobes, D.S. and Rahimi, P. (2008) “Effect of gas-liquid ratio on droplets centricity and velocity of an effervescent atomizer”, 6th Joint ASME/JSME Fluids Engineering Conference (FEDSM2007), Jacksonville, Florida, USA, August 10-14, 2008

  165. Ghaemi, S, Nobes, D.S. and Rahimi, P. (2008) “Measurement of droplet centricity and velocity in the spray field of an effervescent atomizer”, 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon Portugal, July 7-10, 2008.

  166. Ghaemi, S, Nobes, D.S. and Rahimi, P. (2008) “Investigation of Gas-Liquid Ratio Effect on the Near Nozzle Spatial Structure of Effervescent Atomizer-Produced Spray”, The Canadian Society for Mechanical Engineers (CSME) Forum, Ottawa, Ontario, Canada, June 5-8, 2008

  167. Ghaemi, S, Nobes, D.S. and Rahimi, P. (2008) “Investigation of the Spatial Distribution of Droplet SMD in the Spray Field of an Effervescent Atomizer”, ILASS Americas, 21st Annual Conference on Liquid Atomization and Spray Systems, Orlando, Florida, May 18-21 2008

  168. Homeniuk, D.L.N., Nobes, D.S. and Wilson, D. J. (2008) “Three-Dimensional Particle Tracking Velocimetry”, The Canadian Society for Mechanical Engineers (CSME) Forum, Ottawa, Ontario, Canada, June 5-8, 2008

  169. Homeniuk, D.L.N., Nobes, D.S., Molla, S. and Bhattacharjee, S. (2008) “Volume particle tracking in three-dimensional micro-channel flows”, 6th Joint ASME/JSME Fluids Engineering Conference (FEDSM2007), Jacksonville, Florida, USA, August 10-14, 2008

  170. Homeniuk, D.L.N., Nobes, D.S. and Wilson, D. J. (2008) “Development of three-dimensional particle tracking velocimetry for the investigation of unsteady flows”, 6th Joint ASME/JSME Fluids Engineering Conference (FEDSM2007), Jacksonville, Florida, USA, August 10-14, 2008

  171. Nobes, D.S. and Nathan, G.J. (2007) “Effect of precession on the mixing of a jet”, The Combustion Institute Canadian Section Spring Technical Meeting, May 13-16, 2007, Banff, Alberta, Canada

  172. Sauriol, P., Bi, X., Stumper, J., Nobes, D.S., Kiel, D. (2005) “A water transfer factor measurement apparatus for polymer electrolyte membrane fuel cells”, Proc. of the 1st Int. Symp. on Fuel Cell and Hydrogen Technologies, D. Ghosh (Ed.), Calgary, AB, Canada, p 35

  173. Nathan, G.J., Mi, J., Newbold, G.J.R., Nobes, D.S. and Alwahabi, Z.T. (2004) “Effects of subtle and dramatic changes to initial conditions on a jet's turbulent structure, mixing and combustion”, 15th Australasian Fluid Mechanics Conference, Sydney, Australian, 13-17 December 2004.

  174. Nobes, D.S., Tatam, R.P. (2003) “Imaging fibre bundle based 3D planar Doppler velocimetry”, 16th International Conference on Optical Fibre Sensors (OFS-16), Nara, Japan, October, 2003. Published in the proceedings, IEICE, pp. 60-63, 2003.

  175. Ford, H.D., Nobes, D.S. and Tatam, R.P. (2003) “Acousto-optic frequency switching with fibre optic beam delivery for single-camera planar Doppler velocimetry”, 16th International Conference on Optical Fibre Sensors (OFS-16), Nara, Japan, October 2003. Published in the proceedings, IEICE, pp. 226-229, 2003.

  176. Johal, S.S., Rees N., Nobes, D.S., James S.W., Ashwell G.J. and Tatam R.P. (2003) “SHG from optical fibre coupled Langmuir-Blodgett waveguide overlays”, 16th International Conference on Optical Fibre Sensors (OFS-16), Nara, Japan, October 2003. Published in the proceedings, IEICE, pp. 670-673, 2003.

  177. Nobes, D.S., Ford, H.D. and Tatam, R.P. (2002) “A Three Component Planar Doppler Velocimetry System Using Imaging Fibre Bundles”, First International Conference on Optical and Laser Diagnostics (ICOLAD2002) City University London.16-20 December 2002.

  178. Nobes, D.S., Tatam, R.P. (2002) “Three Component Planar Doppler Velocimetry Measurement Using Imaging Fibre Bundles”, The Rank Prize Funds: Symposium on Optics in Fluid Dynamics, Metrology and Atmosphere, Grasmere, England 12-15 August 2002.

  179. Nobes, D.S., Ford, H.D. and Tatam, R.P. (2002) “Imaging Fibre Bundle Three Component Planar Doppler Velocimetry”, 11th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon Portugal, July 8-11, 2002.

  180. Nobes, D.S., Ford, H.D. and Tatam, R.P. (2002) “Three Component Planar Doppler Velocimetry Using Imaging Fibre Bundles”, Applied Optics and Optoelectronics Conference, PHOTON'02, Cardiff, Wales, September 2-5 2002.

  181. Nobes, D.S., Ford, H.D. and Tatam, R.P. (2002) “Three dimensional planar Doppler velocimetry using imaging fiber bundles”, 40th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, 14-17 Jan 2002.

  182. Newbold G.J.R., Nathan G.J., Nobes, D.S. and Turns, S.R. (2001) “The Role Of Large Scale Mixing And Radiation In The Scaling Of NOx Emissions From Unconfined Flames”, The Third Asia-Pacific Conference on Combustion June 24-27, 2001, Seoul, Korea.

  183. Alwahabi, Z.T., King, K.D., Nathan, G.J., Nobes, D.S., Newbold, G.J.R., and Luxton, R.E., (1997) “Planar laser induced fluorescence studies of radicals in precessing jet flames”, Chemeca, Rotorua, New Zealand, September 29-October 1.

  184. Newbold, G.J.R., Nobes, D.S., Nathan, G.J., Luxton, R.E., Alwahabi, Z.T., and King, K.D. (1997) “Reaction and flow field in the stabilisation region of a fluidic precessing jet flame”, Fifth Flame Days. Sydney University, Australia, November 20-21.

  185. Nobes, D.S., Newbold, G.J.R., Nathan, G.J., Luxton, R.E., Alwahabi, Z.T., and King, K.D. (1997) “The Mixing Field of a Simple Round Jet and a Fluidic Precessing Jet”, ASIA -Pacific Conference on Combustion (ASPACC 97) Osaka, Japan, 12-15 May 1997.

  186. Alwahabi, Z.T., King, K.D., Nathan, G.J., Nobes, D.S., Newbold, G.J.R., and Luxton, R.E., (1996) “Planar laser induced fluorescence studies of OH and CH radicals in precessing jet flames”, First Conference on Laser Diagnostics in Fluid Mechanics and Combustion. Sydney University, Australia, December 5-6, 252.

  187. Newbold, G.J.R., Nobes, D.S., Nathan, G.J., Luxton, R.E., Alwahabi, Z.T., and King, K.D. (1996) “Visualisation and mixing in the precessing jet flow”, First Conference on Laser Diagnostics in Fluid Mechanics and Combustion. Sydney University, Australia, December 5-6, pp. 253.

  188. Nobes, D.S., Newbold, G.J.R., Nathan, G.J., Luxton, R.E., Alwahabi, Z.T. and King, K.D. (1996a) “A planar imaging technique for measurement of concentration in a jet”, First Conference on Laser Diagnostics in Fluid Mechanics and Combustion. Sydney University, Australia, December 5-6, pp. 148-153.

  189. Nobes, D.S., Newbold, G.J.R., Nathan, G.J., Luxton, R.E., Alwahabi, Z.T. and King, K.D. (1996b) “Phase average imaging of concentration of a precessing jet flow”, First Conference on Laser Diagnostics in Fluid Mechanics and Combustion. Sydney University, Australia, December 5-6, pp. 154-159.

  190. Newbold, G.J.R., Nobes, D.S., Alwahabi, Z.A., Nathan, G.J. and Luxton, R.E. (1995) “The Application of PIV to the Precessing Jet Nozzle”, 12th Australasian Fluid Mechanics Conference, (December), The University of Sydney, Australia.