Publications

View DSN's publications in Google Scholar

    2023


  1. Kashanj, S., Nobes, D.S. (2023) Application of 4D two-colour LIF to explore the temperature field of laterally confined turbulent Rayleigh–Bénard convection. Exp Fluids 64, 46. DOI (Pub, 26th Jan 2023, 16 pages)

    2. 2022


  2. Azadi, R., & Nobes, D. S. (2022). Hydrodynamic cavitation reduction in semidilute turbulent polymer solution flows. Journal of Fluid Mechanics, 952, A29. (Pub 25th Oct 2022, 35 pages)

  3. Ma, L., Kashanj, S., Li, X., Xu, S., Nobes, D. S., & Ye, M. (2023). Experimental investigation of fluid flow around a porous cube for Reynolds numbers of 400∼ 1400. Chemical Engineering Science, 118443. (Pub 30th Dec 2022, 11 pages)

  4. Ansari, S.; Nobes, D.S. Effect of the Pore Geometry on the Driving Pressure across a Bubble Penetrating a Single Pore. Fluids 2022, 7, 333. DOI (Pub, 20th Oct 2022, 20 pages)

  5. Xiao Qi, Sanaz Hatami, Sabin Bozso, Max Buchko, Keir A. Forgie, Carly Olafson, Mubashir Khan, Sayed Himmat, Xiuhua Wang, David S. Nobes, Jason P. Acker, Jayan Nagendran, Darren H. Freed, The Evaluation of Constant Coronary Artery Flow versus Constant Coronary Perfusion Pressure During Normothermic Ex Situ Heart Perfusion, The Journal of Heart and Lung Transplantation, 2022, DOI. (Pub, 20th Aug 2022, 10 pages)

  6. El Hassan, M., Nobes, D.S. Experimental Investigation of the Vortex Dynamics in Circular Jet Impinging on Rotating Disk. Fluids 2022, 7, 223. DOI (Pub, 29th June 2022, 11 pages)

  7. Jen, N., Bessa, G.M., Nicolson, K., Xiao, J., Nobes, D.S. and Chung, H.J., (2022). Elastomeric tubes with self-regulated distension. Iscience, 25(6), p.104369. (Pub, 3rd May 2022, 19 pages)

  8. Ma, L., Kashanj, S., Xu, S., Zhou, J., Nobes, D.S. and Ye, M. (2022) “Flow Reconstruction and Prediction Based on Small Particle Image Velocimetry Experimental Datasets with Convolutional Neural Networks”, Industrial & Engineering Chemistry Research Article ASAP DOI (Pub, 4th March 2022, 16 pages)

    9. 2021


  9. Azadi, R. and Nobes D.S. (2021) “Local flow dynamics in the motion of slug bubbles in a flowing mini square channel”, International Journal of Heat and Mass Transfer, Vol. 178, 121588 (Accepted, 9th June 2021)

  10. Raffel, J., Ansari, S. and Nobes, D.S. (2021) “An experimental investigation of flow phenomena in a multi-stage micro Tesla valve”, Journal of Fluids Engineering, Vol. 143(11), 111205, (Accepted, 18th May 2021)

  11. Ansari, S. and Nobes, D.S. (2021) “The effect of three-phase contact line pinning during the passage of an isolated bubble through a confining pore”, Physics of Fluids, Physics of Fluids, Vol.33, 053310, (Accepted, 23rd April 2021)

  12. Mostafa, K.G., Momesso, G.A., Li, X., Nobes, D.S. and Qureshi, A.J. (2021) Dual Graded Lattice Structures: Generation Framework and Mechanical Properties Characterization, Polymers, Vol 13, Issue 9, pp 1528, DOI (Accepted, 19 April 2021)

  13. Azadi, R., Wong, J. and Nobes D.S. (2021) “Determination of Fluid Flow Adjacent to a Gas/Liquid Interface Using Particle Tracking Velocimetry (PTV) And a High-Quality Tessellation Approach”, Experiments in Fluids, Vol 62:48 (Accepted, Nov 2020, 20 pages)

  14. Azadi, R. and Nobes D.S. (2021) “On the three-dimensional features of a confined slug bubble in a flowing square capillary”, Physics of Fluids (Vol.XX, Issue XX) (Accepted, 19th Feb 2021)

  15. Eghbali, S., Banks, J., and Nobes, D. S. (2021). A numerical study on compositional modeling of two-phase fluid flow and heat transfer in vertical wells. Journal of Petroleum Science and Engineering, 201, 108400. (accepted, 11th Jan 2021, ) DOI

  16. Hatami, S, Qi, X., White, C.W., Bozso, M.D., Himmat, S., Sergu, C., Nagendran, J., Chung, H-J., Nobes, D.S. and Freed, D.H. (2021), “The Position of the Heart During Normothermic ex-situ Heart Perfusion is an Important Factor in Preservation and Recovery of Myocardial Function”, ASAIO Journal (accepted, 4th Jan 2021)

    17. 2020


  17. Tran, B., Nobes, D.S., Major P.W., Carey, J.P., and Romanyk, D.L. (2020) “The three-dimensional mechanical response of orthodontic archwires and brackets in vitro during simulated orthodontic torque”, Journal of the Mechanical Behavior of Biomedical Materials, Vol 114, p.104196 DOI (Accepted, Nov 2020, 13 pages)

  18. Mostafa, K.G., Nobes, D.S. and Qureshi, A.J., (2020) “Investigation of Light-Induced Surface Roughness in Projection Micro-Stereolithography Additive Manufacturing (PµSLA)”, Procedia CIRP, 92, pp.187-193.

  19. Cameron, K., El Hassan, M., Sabbagh, R., Freed, D.H. and Nobes, D.S. (2020) “Experimental investigation into the effect of compliance of a mock aorta on cardiac performance”, PLoS ONE, Vol 15(10): e0239604. DOI (Accepted, Sept 2020, 13 pages)

  20. Ansari, S., Rashid, M., Waghmare, P.R. and Nobes, D.S. (2020) “Measurement of the flow behavior index of Newtonian and shear‑thinning fluids via analysis of the flow velocity characteristics in a mini‑channel”, SN Appl. Sci. 2, 1787. DOI , (Accepted, Sept 2020)

  21. Azadi, R., Wong, J. and Nobes D.S. (2020) “Experimental and Analytical Investigation of Meso-Scale Slug Bubble Dynamics in a Square Capillary Channel”, Physics of Fluids (Vol.32, Issue 8) DOI (Accepted, July 2020)

  22. Villacres, J., Nobes, D.S. and Ayranci, C., (2020) “Additive Manufacturing of Shape Memory Polymers: Effects of Print Orientation and Infill Percentage on Shape Memory Recovery Properties”. Rapid Prototyping Journal, Vol 26 (9), pp 1593-1602 (Accepted, 18th June 2020)

  23. Sabbagh, R., Ansari, S., and Nobes, D.S. (2020) “An imaging approach for in-situ measurement of refractive index of a porous medium”, Journal of Visualization, Vol 134, 106175 (Accepted, 5th May 2020)

  24. Ansari, S., and Nobes, D.S. (2020) “Interaction of loosely packed bubbly flow passing through a pore space”, Journal of Visualization, Vol 23, pp 649-660 (Accepted, 8th April 2020)

  25. Bukharin N., El Hassan M., Nobes D. and Omelyanyuk M. (2020) “Reducing energy consumption during bitumen separation from oil sand” Energy Reports 6, 206-213 (22 November 2019)

  26. Sabbagh, R., Kazemi, M., Soltani, H, and Nobes, D.S. (2020) Micro and macro scale measurement of flow velocity in porous media: a shadow imaging approach for 2D and 3D, Optics, Special Issue "Optical Diagnostics in Engineering", Vol 1 (1), pp. 71-87 (Accepted, 18th Feb 2020)

  27. Mostafa, K.G., Arshad, M., Ullah, A., Nobes, D.S. and Qureshi, A.J. (2020) Concurrent Modelling and Experimental Investigation of Material Properties and Geometries Produced by Projection Microstereolithography, Polymers, Vol 12, pp 506.1:506.23 (Accepted, 23 January 2020)

  28. Kazemi, M., Elliott, J.A.W. and Nobes, D.S. (2020) Three-dimensional reconstruction of evaporation-induced instabilities using volumetric scanning particle image velocimetry, Optics, Special Issue "Optical Diagnostics in Engineering", Vol 1 (1), pp. 52-70 (Accepted, 26 December 2019)

    29. 2019


  29. Zhalmuratova, D., La, T-G, Yu, K.T.T., Szojka, A.R.A., Andrews, S.H.J., Adesida, A.B., Kim, C., Nobes, D.S., Freed, D.H., and Chung, H.J. (2019) Mimicking “J-Shaped” and Anisotropic Stress–Strain Behavior of Human and Porcine Aorta by Fabric-Reinforced Elastomer Composites, ACS Appl. Mater. Interfaces, Vol 11, pp 33323-33335 (Publication Date: August 29, 2019)

  30. Kinsale, L.K., Kazemi, M., Elliott, J.A.W. and Nobes, D.S. (2019) Transportation and Deposition of Spherical and Irregularly Shaped Particles Flowing Through a Porous Network into a Narrow Slot, Exp Therm Fluid Sci, (Accepted, 9th Aug 2019)

  31. Ansari, S., Sabbagh, R., Yusuf, Y. and Nobes, D.S. (2019) The Role of Emulsions in Steam Assisted Gravity Drainage (SAGD) Oil Production Process: A Review, SPE Journal, (Accepted, 9th Aug 2019)

  32. Yusuf, Y., Sabbagh, R. and Nobes, D.S. (2019) Semi-empirical pressure loss model for Viscous flow through high aspect ratio rectangular orifices, Physics of Fluids, 31(7), pp. 073603

  33. Hatami, S., White, C.W., Ondrus, M., Qi, X., Buchko, M., Himmat, S., Lin, L., Cameron, K., Nobes, D., Chung, H.J. and Nagendran, J. (2019) Normothermic Ex Situ Heart Perfusion in Working Mode: Assessment of Cardiac Function and Metabolism. JoVE (Journal of Visualized Experiments), (143), p.e58430.

  34. Ansari, A., Yusuf, Y., Sabbagh, R. and Nobes, D.S. (2019) Determining the pressure distribution of a multi-phase flow through a pore space using velocity measurement and shape analysis. Measurement Science and Technology. Vol. 30 (5) DOI

  35. Wang, H., Nobes, D.S., Vehring, R., (2019). Particle surface roughness improves colloidal stability of pressurized pharmaceutical suspensions. Pharmaceutical Research, 36(3), 43. DOI

  36. Liu, H., Fan, C.C., Nobes, D.S. and He, Y.L. (2019) Heat Transfer and Flow Characteristics in a Rectangular Channel with Combined Delta Winglet Inserts, International Journal of Heat and Mass Transfer. Vol 134, pages 149-165

    37. 2018


  37. Kazemi, M., Nobes, D.S. and Elliott, J.A.W. (2018) Investigation of the phenomena occurring near the liquid-vapor interface during evaporation of water at low pressures, Physical Review Fluids, 3(12), p.124001

  38. Kazemi, M., Elliott, J.A.W. and Nobes, D.S. (2018). The influence of container geometry and thermal conductivity on evaporation of water at low pressures. Scientific Reports, 8(1), p.15121

  39. Soltani, H, Sabbagh, R., and Nobes D.S. (2018) The Passage of Bubbles Rising Through a Confining Rectangular Geometry, Physics of Fluids, 30(10), p.103302

  40. Wang H, Tan P, Barona D, Li G, Hoe S, Lechuga-Ballesteros D, Nobes D.S., Vehring R. (2018) Characterization of the Suspension Stability of Pharmaceuticals Using a Shadowgraphic Imaging Method. International journal of pharmaceutics. 548:128-38

  41. Agrawal Y.K., Sabbagh, R., Sanders R.S., and Nobes, D.S. (2018) Measuring the Refractive Index, Density, Viscosity, pH, and Surface Tension of Potassium Thiocyanate (KSCN) Solutions for Refractive Index Matching in Flow Experiments, Journal of Chemical & Engineering Data, 63(5), pp.1275-1285

  42. Villacres, J., Nobes, D.S. and Ayranci, C., (2018) Additive manufacturing of shape memory polymers: effects of print orientation and infill percentage on mechanical properties. Rapid Prototyping Journal, 24(4), pp.744-751

    43. 2017


  43. Aldrich, D., Ayranci, C. and Nobes, D.S. (2017). OSM-Classic: An optical imaging technique for accurately determining strain, SoftwareX, 6, pp 22s5-230

  44. Kazemi, M., Nobes, D.S. & Elliott, J.A.W. (2017). Effect of the Thermocouple on Measuring the Temperature Discontinuity at a Liquid–Vapor Interface, Langmuir, 33 (28), pp 7169-7180

  45. Kazemi, M., Nobes, D.S. & Elliott, J.A.W. (2017). Experimental and numerical study on the evaporation of water at low pressures, Langmuir, 33 (18), pp 4578–4591

  46. Sabbagh, R., Koch, C. R., Lipsett, M. G., & Nobes, D. S. (2017). Hydrocyclone equivalent settling area factor at higher concentrations and developing a performance chart. Separation and Purification Technology, Vol 182, pp 171–184 (14 pages)

    47. 2016


  47. Sabbagh, R., Lipsett, M. G., Koch, C. R., & Nobes, D. S. (2016). An experimental investigation on hydrocyclone underflow pumping. Powder Technology, Vol 305, 99–108. DOI (10 pages)

  48. Ferraz-Albani, L.A., Baldelli, A., Knapp, C.J., Jäger, W., Vehring, R., Nobes DS, Olfert J.S., Kostiuk LW. (2016). Enhanced Evaporation of Micro-Scale Droplets with an Infrared Laser. Journal of Heat Transfer. Vol 139(1), 011503

  49. Geoghegan, P. H., Jermy, M. C., & Nobes, D. S. (2016). A PIV comparison of the flow field and wall shear stress in rigid and compliant models of healthy carotid arteries. Journal of Mechanics in Medicine and Biology, 1750041. (15 pages)

  50. Kotchon, A, Lipsett, M.G. and Nobes, D.S. (2016) Damage Detection in Tires Using Image-Based Strain Measurements, Journal of Failure Analysis and Prevention. Vol 16(3), pp 438-448 (11 pages)

  51. Sabbagh, R., Lipsett, M.G., Koch, C.R. and Nobes, D.S. (2016) Predicting equivalent settling area factor in hydrocyclones; a method for determining tangential velocity profile. Separation and Purification Technology, 163, pp 341–351. (11 pages)

  52. Vali, A., Nobes, D. S., and Kostiuk, L. W. (2016). Characterization of Flow Field within the Liquid Phase of a Small Pool Fire Using Particle Image Velocimetry Technique. Exp Therm Fluid Sci, Vol. 75, pp. 228-234 (7 pages)

    53. 2015


  53. Babazadeh, H., Nobes, D. S., and Koch, C. R. (2015). Active and passive flow control on a precessing jet. Experiments in Fluids, 56(1), 1-10. (10 pages)

  54. Baldelli, A., Boraey, M. A., Nobes, D. S., and Vehring, R. (2015). Analysis of the Particle Formation Process of Structured Microparticles. Molecular pharmaceutics, 2015, 12 (8), pp 2562–2573. (12 pages)

  55. Hong, M., Fleck, B.A. and Nobes, D.S., (2015) "Unsteadiness of the internal flow in an effervescent atomizer nozzle", Exp. in Fluids, Vol. 55, No. 12, pp 1-15 (15 pages)

  56. Raasch, J., Ivey, M., Aldrich, D., Nobes, D.S. and Ayranci, C., (2015) Characterization of polyurethane shape memory polymer processed by material extrusion additive manufacturing. Additive Manufacturing, Vol 8, pp.132-141.

  57. Vali, A., Nobes, D. S., and Kostiuk, L. W. (2015). Fluid motion and energy transfer within burning liquid fuel pools of various thicknesses.Combustion and Flame, 162(4), 1477-1488. (12 pages)

    58. 2014


  58. Melenka, G. W., Lacoursiere, R. A., Carey, J.P., Nobes, D. S., Heo, G. & Major P. W. (2014). Comparison of Deformation and Torque Expression of the Orthos and Orthos Ti Bracket Systems. The European Journal of Orthodontics Volume 36, Issue 4, August 2014, Pages 381-388

  59. Sabbagh, R., Lipsett, M.G., Koch, C.R. and Nobes, D.S. (2014) Hydrocyclone Performance and Energy Consumption Prediction: A ‎Comparison with Other Centrifugal Separators, Separation Science and Technology, 50 (6), pp. 788-801. (14 pages)

  60. Vali, A., Nobes, D. S., and Kostiuk, L. W. (2014). Quantifying the Conduction Pathways in a Laboratory-Scale Methanol Pool Fire. Combustion Science and Technology, vol. 187, Issue 5, pp 765-779 (15 pages)

  61. Vali, A., Nobes, D.S. and Kostiuk, L.W. (2014), "Transport phenomena within the liquid phase of a laboratory-scale circular methanol pool fire", Combustion and Flame, vol. 161(4), 2014, 1076-1084

  62. Baldygin, A., Nobes, D.S. and Mitra, S.K. (2014) "Water-Alternate-Emulsion (WAE): A new technique for enhanced oil recovery", Journal of Petroleum Science and Engineering, Vol 121, 167-173

  63. Baldygin, A., Nobes, D.S. and Mitra, S.K. (2014) "A new laboratory core flooding experimental system", Ind. Eng. Chem. Res., Publication Date (Web): August 8, 2014 DOI

  64. Setayeshgar, A., Lipsett, M.G., Koch, C.R. and Nobes, D.S. (2014) "Particle Motion In A Macro-Scale Multi-Wavelength Acoustic Field", J. Fluids Eng. (Accepted, April 2013)

  65. Al Fakir, H., Carey, J.P., Melenka, G.W., Nobes, D.S., Heo, G., and Major P.W. (2014) "Investigation into the effects of stainless steel ligature ties on the mechanical characteristics of conventional and self-ligated brackets subjected to torque", Journal of Orthodontics, Vol. 41, 188-200

  66. Mahmoudi, M., Nobes, D.S. and Fleck, B.A. (2014) "An Experiment Design for Measuring the Velocity Field of a Round Wall Jet in Counter-Flow", International Journal of Mechanical Engineering and Mechatronics, Volume 2, Issue 1, pp 23-32

  67. Stephen, A., Adebusuyi, A., Baldygin, A., Shuster, J., Southam, G., Budwill, K., Foght, J., Nobes, D.S. and Mitra, S.K. (2014) "Bioconversion of Coal: New Insights from a Core Flooding Study", RSC Advances, DOI

    68. 2013


  68. Breton, K.M., Fleck, B.A. and Nobes, D.S. (2013) "A parametric study of a flash atomized water jet using a phase Doppler particle analyzer", Atomization and Sprays, Volume 23, Issue 9, 2013, Pages 799-817

  69. Sen, D., Balzan, M., Nobes, D.S. Fleck, B.A. (2013)"Bubble formation and flow instability in an effervescent atomizer", J Vis, Vol 17, pp 113-122

  70. Torres, L.A., Fleck, B.A, Wilson, D.J., and Nobes, D.S. (2013) "Calibration of a Planar Laser Induced Fluorescence Technique for Use in Large Scale Water Facilities Measurement", Measurement, 46, pp. 2597-2607

  71. Melenka, G.W., Nobes, D.S., Major, P.W., Carey, J.P. (2013) Three Dimensional Deformation of Orthodontic Brackets, Journal of Dental Biomechanics, JDB-12-0010, Accepted April, 2013

  72. Melenka G.W., Nobes, D.S., Major, P.W., Carey, J.P., (2013) Design of an Orthodontic Torque Simulator for Measurement of Bracket Deformation, Sensing and Imaging, Volume 14, Issue 3-4, Pages 57-80

  73. Leung, C.K., Melenka, G.W., Nobes, D.S. and Carey, J.P. (2013) "The Effect on Elastic Modulus of Rigid-Matrix Tubular Composite Braid Radius and Braid Angle Change Under Tensile Loading", Composite Structures Vol 100, pp 135-143

  74. Melenka, G.W., Nobes, D.S. Carey, J.P., Major, P.W., (2013) Three Dimensional Comparison of Self-ligating Brackets, American Journal of Orthodontics & Dentofacial Orthopedics, AJODO-S- 12-00574R2, (Accepted Dec, 2012)

  75. Vali, A., Nobes, D.S. and Kostiuk, L.W. (2013) "Effects of altering the liquid phase boundary conditions of methanol pool fires", Exp Therm Fluid Sci, Vol 44, pp 786-791

    76. 2012


  76. Ayranci, I., Machado, M.B., Madej, A.M., Derksen, J.J., Nobes, D.S., Krezta, S.M. (2012) “Effect of geometry on the mechanisms for off-bottom solids suspension in a stirred tank”, Chemical Engineering Science, Vol 79, pp 163-176

  77. Major, T., Carey, J.P., Nobes, D.S. Heo, G., Major, P.W. (2012) “Deformation and warping of the bracket slot in select self-ligating orthodontic brackets due to an applied third order torque”, Journal of Orthodontics, Vol 39, pp 25-33

    78. 2011


  78. Torres, L.A., Mahmoudi, M., Fleck, B.A, Wilson, D.J. and Nobes, D.S. (2011) “Mean Concentration Field of Counter-flowing Jets”, Journal of Fluids Engineering, Vol. 134(1) 014502

  79. Melenka, G. W., Lacoursiere, R. A., Carey, J.P., Nobes, D. S., Heo, G. & Major P. W. (2011). Comparison of Deformation and Torque Expression of the Orthos and Orthos Ti Bracket Systems. The European Journal of Orthodontics DOI

  80. Babazadeh, H., Koch, R.C. and Nobes, D.S. (2011) “Investigation of Micro-jet Active Control of a Precessing Jet using PIV”, Exp. in Fluids, Vol. 51, No. 6, pp 1709-1719

  81. Machado, M.B., Nunhez, J.R., Nobes, D.S., Kresta, S.M. (2011) “Impeller Characterization and Selection: Balancing Efficient Hydrodynamics with Process Mixing Requirements”, AIChE Journal, Vol. 58, No. 8, pp 2573-2588

  82. Sen, D., Nobes, D.S. and Mitra, S.K. (2011) “Optical measurement of pore scale velocity field inside micro porous media”, Microfluidics and Nanofluidics, Vol. 12, pp. 189 - 200

  83. Madej, A.M. Babazadeh, H., and Nobes, D.S. (2011) “The effect of chamber length and Reynolds number on jet precession”, Exp. in Fluids, Vol. 51, No. 6, pp 1623-1643

  84. Major, T., Carey J.P., Nobes, D.S., Giseon, H., Melenka G, Major P.W. (2011) “An investigation into the mechanical characteristics of select self ligated brackets at a series of clinically relevant maximum torquing angles: Loading and unloading curves and bracket deformation”, European Journal of Orthodontics DOI , published online July 12, 2011.

  85. Song, X. and Nobes, D.S. (2011) “Experimental Investigation of Evaporation-Induced Convection in Water Using Laser Based Measurement Techniques”, Exp Therm Fluid Sci, 35 pp 910–919

  86. Comyn, G., Nobes, D.S. and Fleck, B.E. (2011) “Performance evaluation and wake study of a micro wind turbine”, Trans. Can. Soc. Mech. Eng., Vol 35(1), pp 101-117

    87. 2010


  87. Major, T., Carey, J.P., Nobes, D.S. and Major, P.W., (2010) “Measurement of plastic and elastic deformation due to third order torque in self-ligated prthodontic brackets", American Journal of Orthodontics & Dentofacial Orthopedics, 140(3):pp 326-39

  88. Major, T, Carey, J.P., Nobes, D.S. and Major, P.W., (2010) “Orthodontic bracket manufacturing tolerances and dimensional differences between select self-ligating brackets”, Journal of Dental Biomechanics. Volume 2010, Article ID 781321

  89. Tan, A.W., Nobes, D.S., Fleck, B.A. and Flynn, M.R. (2010) “Gravity currents in two-layer stratified media”, Environmental Fluid Mechanics Volume 11, Issue 2 (2011), Page 203

  90. Tan, A.W., Nobes, D.S., Fleck, B.A. and Flynn, M.R. (2010) “Erratum to: Gravity currents in two-layer stratified media”, Environmental Fluid Mechanics Volume 11, Issue 2 (2011), Page 225

  91. Ghaemi, S, Rahimi, P. and Nobes, D.S. (2010) “Evaluation of Digital Image Discretization Error in Droplet Shape Measurement Using Simulation”, Particle & Particle Systems Characterization, Volume 26, Issue 5-6, July 2010, Pages 243-255

  92. Major, T., Carey, J.P., Nobes, D.S.; Heo, G., and Major, P.W., “An Investigation into the Mechanical Effects of Third Order Movement in Self-Ligated Brackets by the Measurement of Torque Expression”, American Journal of Orthodontics & Dentofacial Orthopedics, (Accepted April 12 2010)

  93. Ghaemi, S., Rahimi, P. and Nobes, D.S. (2010) “The effect of gas-injector location on bubble formation in liquid cross flow”, Phys. Fluids 22(4), pp. 1-15,

  94. Ghaemi, S., Rahimi, P. and Nobes, D.S. (2010) “Effect of Bubble Generation Characteristics on Effervescent Atomization at Low Gas-Liquid Ratio Operation” Atomization and Sprays 20(3), pp. 211-225

  95. Ghaemi, S., Rahimi, P. and Nobes, D.S. (2010) “Evaluation of StereoPIV measurement of droplet velocity in an effervescent spray”, The International Journal of Spray and Combustion Dynamics, Vol 2 No2 pp 103-124

  96. Lacoursiere, R.A, Nobes, D.S., Homeniuk, D.L.N., Carey,J.P., Badawi H.H. and Major P.W. (2010) “Measurement of orthodontic bracket tie wing elastic and plastic deformation by arch wire torque expression utilizing an optical image correlation technique”, Journal of Dental Biomechanics, vol. 2010, Article ID 781321

    97. 2009


  97. Ghaemi, S., Rahimi, P. and Nobes, D.S. (2009) “Assessment of parameters for distinguishing droplet shape in a spray field using image-based techniques” Atomization and Sprays, Vol 19(9), pp 809-831

  98. Sauriol, P., Nobes, D.S., Bi, X.T., Stumper,J., Jones, D. and Kiel, D. (2009) “Design and Validation of a Water Transfer Factor Measurement Apparatus for PEMFCs” Journal of Fuel Cell Science and Technology Vol 6(4), pp. 0410141-04101413

    99. 2007


  99. Charrett, T.O.H., Nobes, D.S. and Tatam, R.P. (2007) “Investigation into the selection of viewing configurations for three-component planar Doppler velocimetry measurements”, Appl. Opt. Vol 46, pp 4102-4116

    100. 2006


  100. Nathan, G.J., Mi, J., Alwahabi, Z.T., Newbold, G.J.R. and Nobes, D.S. (2006) “Impacts of a jet's exit flow pattern on mixing and combustion performance”, Prog. Energy Comb. Sci. Vol 32 (5-6) pp 496-538.

    101. 2004


  101. Nobes, D.S., Wieneke, B. and Tatam, R.P. (2004) “Determination of view vectors from image warping mapping functions”, Optical Engineering 43, pp. 407-414.

  102. Charrett, T.O.H., Ford, H.D., Nobes, D.S., and Tatam, R.P. (2004) “Two-frequency planar Doppler velocimetry (2V-PDV)”, Review of Scientific Instruments, Vol 75, pp4487-4496.

  103. Nobes, D.S., Ford, H.D. and Tatam, R.P. (2004) “Instantaneous three component planar Doppler velocimetry using imaging fibre bundles”,Exp. in Fluids 36, pp. 3-10, 2004.

    104. 2003


  104. Charrett, T.O.H., Ford, H.D., Nobes, D.S., and Tatam, R.P. (2003) “Dual Illumination Planar Doppler Velocimetry using a Single Camera”, Proceedings of SPIE - The International Society for Optical Engineering, 5191, pp. 113-121

  105. Ford, H.D., Nobes, D.S. and Tatam, R.P. (2003) “Acousto-optic frequency shifting for two-wavelength Planar Doppler Velocimetry”, Institute of Physics Conference Series 177, pp. 33-38

  106. Nobes, D.S., Tatam, R.P. (2003) “Planar Doppler velocimetry measurements of flows using imaging fiber bundles”, Proceedings of SPIE - The International Society for Optical Engineering 5191, pp. 122-133

  107. Nobes, D.S., Tatam, R.P. (2003) “Imaging fibre bundle based 3 component Planar Doppler Velocimetry”, Institute of Physics Conference Series 177, pp. 181-185.

    108. 2002


  108. Newbold, G.J.R., Nathan, G.J., Nobes, D.S. and Turns, S.R. (2002) “The role of large scale mixing and radiation in the scaling of NOx emissions from unconfined flames”, Journal of the Korean Society of Combustion, 7, (1).

  109. Smith, N.L., Nathan, G.J., Zhang D.K. and Nobes D.S. (2002) “The Significance of Particle Clustering in Pulverised Coal Flames” P COMBUST INST Vol 29 pp 797-804 Part 1.

    110. 2001


  110. Ford, H.D., Nobes, D.S. and Tatam, R.P. (2001) “Acousto-optic frequency switching for single-camera planar Doppler velocimetry”, Proceedings of SPIE - The International Society for Optical Engineering 4448, pp. 272-282

  111. Mi,J., Nathan, G.J. and Nobes, D.S. (2001) “Mixing Characteristics of Axisymmetric Free Jets From a Contoured Nozzle, an Orifice Plate and a Pipe”, J. Fluids Eng. Vol 123 No.4 pp. 878-883.

  112. Mi,J., Nobes, D.S. and Nathan, G.J. (2001) “Influence of jet exit conditions on the passive scalar field of an axisymmetric free jet”, J. Fluid Mech. Vol 432, pp. 91-125.

  113. Nobes, D.S., Ford, H.D. and Tatam, R.P. (2001) “Instantaneous, two camera, three dimensional planar Doppler velocimetry using imaging fiber bundles”, Proceedings of SPIE - The International Society for Optical Engineering 5191, pp. 122-133.

    114. 2000


  114. Newbold, G.J.R., Nathan, G.J., Nobes, D.S. and Turns S.R. (2000) “Measurement and prediction of NOx emissions from unconfined propane flames from turbulent-jet, bluff-body, swirl and precessing jet burners”. P COMBUST INST Vol 28 pp 481-487 Part 1.

    115. 1999


  115. Smart,J.P., Nathan,G.J., Smith,N.L., Newbold,G.J.R, Nobes,D.S. and Morgan, D.J. (1999) “On the development of a coal fired precessing jet burner”. IFRF Combustion Journal. Article Number 199902.

    116. 1997


  116. Nathan, G.J., Nobes, D.S., Mi, J., Schneider, G.M., Newbold, G.J.R., Alwahabi, Z.T. Luxton, R.E. and King, K.D., (1997) “Exploring the Relationship between Mixing, Radiation and NOx Emissions from Natural Gas Flames”, Combustion and Emissions Control III, The Institute of Energy, pp. 49-69, ISBN 090 2597558, Pergamon Press.

  117. Nobes, D.S., Newbold, G.J.R., and Alwahabi, Z.T. (1997) “Quantitative Planar Imaging of Large Flow Structures developed through the Precession of a Jet”, IUTAM Symposium on Simulation and Identification of Organized Structures in Flows Lyngby, Denmark, 25-29 May 1997 ISBN 0-7923-5603-9 Kluwer Academic Publishers