#include <unistd.h>
extern char **environ;
int execl ( Path, Argument0 [, Argument1, ...], 0) const char *Path, *Argument0, *Argument 1, ...;
int execle ( Path, Argument0 [, Argument1, ...], 0, EnvironmentPointer) const char *Path, *Argument0, *Argum ent 1, ...; char *const EnvironmentPointer[ ];
int execlp ( File, Argument0 [, Argument1 , ...], 0) const char *File, *Argument0, *Argument 1, ...;
int execv ( Path, ArgumentV) const char *Path; char *const ArgumentV[ ];
int execve ( Path, ArgumentV, EnvironmentPointer) const char *Path; char *const ArgumentV[ ], *EnvironmentPointer [ ];
int execvp ( File, ArgumentV) const char *File; char *const ArgumentV[ ];
int exect ( Path, ArgumentV, EnvironmentPointer) char *Path, *ArgumentV, *EnvironmentPointer [ ];
The exec subroutine, in all its forms, executes a new program in the calling process. The exec subroutine does not create a new process, but overlays the current program with a new one, which is called the new-process image. The new-process image file can be one of three file types:
The new-process image inherits the following attributes from the calling process image: session membership, supplementary group IDs, process signal mask, and pending signals.
The last of the types mentioned is recognized by a header with the following syntax:
#! Path [String]
The #! is the file magic number, which identifies the file type. The path name of the file to be executed is specified by the Path parameter. The String parameter is an optional character string that contains no tab or space characters. If specified, this string is passed to the new process as an argument in front of the name of the new-process image file. The header must be terminated with a new-line character. When called, the new process passes the Path parameter as ArgumentV[0]. If a String parameter is specified in the new process image file, the exec subroutine sets ArgumentV[0] to the String and Path parameter values concatenated together. The rest of the arguments passed are the same as those passed to the exec subroutine.
The exec subroutine attempts to cancel outstanding asynchronous I/O requests by this process. If the asynchronous I/O requests cannot be canceled, the application is blocked until the requests have completed.
The exec subroutine is similar to the load subroutine, except that the exec subroutine does not have an explicit library path parameter. Instead, the exec subroutine uses the LIBPATH environment variable. The LIBPATH variable is ignored when the program that the exec subroutine is run on has more privilege than the calling program, for example, the suid program.
The exect subroutine is included for compatibility with older programs being traced with the ptrace command. The program being executed is forced into hardware single-step mode.
Note: exect is not supported in 64-bit mode.
When a C program is run, it receives the following parameters:
main (ArgumentCount, ArgumentV, EnvironmentPointer) int ArgumentCount; char *ArgumentV[ ], *EnvironmentPointer[ ];
In this example, the ArgumentCount parameter is the argument count, and the ArgumentV parameter is an array of character pointers to the arguments themselves. By convention, the value of the ArgumentCount parameter is at least 1, and the ArgumentV[0] parameter points to a string containing the name of the new-process image file.
The main routine of a C language program automatically begins with a runtime start-off routine. This routine sets the environ global variable so that it points to the environment array passed to the program in EnvironmentPointer. You can access this global variable by including the following declaration in your program:
extern char **environ;
The execl, execv, execlp, and execvp subroutines use the environ global variable to pass the calling process current environment to the new process.
File descriptors open in the calling process remain open, except for those whose close-on-exec flag is set. For those file descriptors that remain open, the file pointer is unchanged. (For information about file control, see the fcntl.h file.)
The state-of-conversion descriptors and message-catalog descriptors in the new process image are undefined. For the new process, an equivalent of the setlocale subroutine, specifying the LC_ALL value for its category and the "C" value for its locale, is run at startup.
If the new program requires shared libraries, the exec subroutine finds, opens, and loads each of them into the new-process address space. The referenced counts for shared libraries in use by the issuer of the exec are decremented. Shared libraries are searched for in the directories listed in the LIBPATH environment variable. If any of these files is remote, the data is copied into local virtual memory.
The exec subroutines reset all caught signals to the default action. Signals that cause the default action continue to do so after the exec subroutines. Ignored signals remain ignored, the signal mask remains the same, and the signal stack state is reset. (For information about signals, see the sigaction subroutine.)
If the SetUserID mode bit of the new-process image file is set, the exec subroutine sets the effective user ID of the new process to the owner ID of the new-process image file. Similarly, if the SetGroupID mode bit of the new-process image file is set, the effective group ID of the new process is set to the group ID of the new-process image file. The real user ID and real group ID of the new process remain the same as those of the calling process. (For information about the SetID modes, see the chmod subroutine.)
At the end of the exec operation the saved user ID and saved group ID of the process are always set to the effective user ID and effective group ID, respectively, of the process.
When one or both of the set ID mode bits is set and the file to be executed is a remote file, the file user and group IDs go through outbound translation at the server. Then they are transmitted to the client node where they are translated according to the inbound translation table. These translated IDs become the user and group IDs of the new process.
Note: setuid and setgid bids on shell scripts do not affect user or group IDs of the process finally executed.
Profiling is disabled for the new process.
The new process inherits the following attributes from the calling process:
Upon successful completion, the exec subroutines mark for update the st_atime field of the file.
execlp("li", "li", "-al", 0);The execlp subroutine searches each of the directories listed in the PATH environment variable for the li command, and then it overlays the current process image with this command. The execlp subroutine is not returned, unless the li command cannot be executed.
Note: This example does not run the shell command processor, so operations interpreted by the shell, such as using wildcard characters in file names, are not valid.
execl("/usr/bin/sh", "sh", "-c", "li -l *.c", 0);This runs the sh command with the -c flag, which indicates that the following parameter is the command to be interpreted. This example uses the execl subroutine instead of the execlp subroutine because the full path name /usr/bin/sh is specified, making a path search unnecessary.
Running a shell command in a child process is generally more useful than simply using the exec subroutine, as shown in this example. The simplest way to do this is to use the system subroutine.
#! /usr/bin/awk -f { for (i = NF; i > 0; --i) print $i }If this file is named reverse, entering the following command on the command line:
reverse chapter1 chapter2This command runs the following command:
/usr/bin/awk -f reverse chapter1 chapter2
Note: The exec subroutines use only the first line of the new-process image file and ignore the rest of it. Also, the awk command interprets the text that follows a # (pound sign) as a comment.
Upon successful completion, the exec subroutines do not return because the calling process image is overlaid by the new-process image. If the exec subroutines return to the calling process, the value of -1 is returned and the errno global variable is set to identify the error.
If the exec subroutine is unsuccessful, it returns one or more of the following error codes:
If the exec subroutine is unsuccessful because of a condition requiring path name resolution, it returns one or more of the following error codes:
In addition, some errors can occur when using the new-process file after the old process image has been overwritten. These errors include problems in setting up new data and stack registers, problems in mapping a shared library, or problems in reading the new-process file. Because returning to the calling process is not possible, the system sends the SIGKILL signal to the process when one of these errors occurs.
If an error occurred while mapping a shared library, an error message describing the reason for error is written to standard error before the signal SIGKILL is sent to the process. If a shared library cannot be mapped, the subroutine returns one of the following error codes:
If NFS is installed on the system, the exec subroutine can also fail if the following is true:
| ETIMEDOUT | The connection timed out. |
These subroutines are part of Base Operating System (BOS) Runtime.
Note: Currently, a Graphics Library program cannot be overlaid with another Graphics Library program. The overlaying program can be a nongraphics program. For additional information, see the /usr/lpp/GL/README file.
The alarm or incinterval subroutine, chmod or fchmod subroutine, exit subroutine, fcntl subroutine, fork subroutine, getrusage or times subroutine, nice subroutine, profil subroutine, ptrace subroutine.
The semop subroutine, settimer subroutine, sigaction, signal, or sigvec subroutine, shmat subroutine, system subroutine, ulimit subroutine, umask subroutine.
The awk command, ksh command, sh command.
The environment file.
The XCOFF object (a.out) file format.
The varargs macros.
Asynchronous I/O Overview in AIX Kernel Extensions and Device Support Programming Concepts.