This category of identifiers contains the following error labels:
GRAPHICS
Go back to the categories of Error Identifiers.
Error Description: SOFTWARE PROGRAM ERROR
This error is logged by the Graphics Subsystem which includes the inpute device drivers and graphics display device drivers.
An example of an LFT error log entry in the system error log.
ERROR LABEL: GRAPHICS ERROR ID: <an errorid>
Date/Time: <time and date> Sequence Number: <sequence number> Machine Id: <machine ID> Node Id: <node ID> Class: <class> Type: Resource Name: <resource name>
Error Description SOFTWARE PROGRAM ERROR
Probable Causes SOFTWARE PROGRAM
Failure Causes SOFTWARE PROGRAM
Recommended Actions IF PROBLEM CONTINUES TO OCCUR REPEATEDLY THEN DO THE FOLLOWING CONTACT APPROPRIATE SERVICE REPRESENTATIVE REPORT DETAILED DATA
Detail Data DETECTED FAILED RC ERROR LOCATION
The Detail Data consists of the following:
| DETECTED | Specifies the name of the module where the error occurred. |
| FAILED | Specifies the called function that returned an error. |
| RC | Specifies the return code. |
| ERROR | Specifies a number that identifies the error. |
| LOCATION | Specifies a unique number (per module) to help locate the failure. |
| Table 1. List of Errors in the lftconfig Module. | |||||
| DETECTED | FAILED | RC | ERROR | LOCATION | ERROR DESCRIPTION |
| lftconfig | NULL | 0 | 1000 | 1 | LFT is already initialized. No re- covery - reboot |
| lftconfig | NULL | 0 | 1001 | 2 | LFT is in an unknown state. No recovery - reboot |
| lftconfig | xmalloc | 0 | 1002 | 3 | Could not allocate the lft_ptr data structure |
| lftconfig | NULL | 0 | 1003 | 4 | Invalid data transfer size User space -> Kernel space |
| lftconfig | xmalloc | 0 | 1002 | 5 | Could not allocate the dds structure |
| lftconfig | copyin | > 0 | 1004 | 6 | Copy of the dds structure failed |
| lftconfig | NULL | 0 | 1040 | 7 | No font file in the DDS structure |
| lftconfig | xmalloc | 0 | 1002 | 8 | No space for font file names |
| lftconfig | copyin | > 0 | 1004 | 9 | Could not copy font file names |
| lftconfig | lft _fonts _init | > 0 | 1041 | 10 | Font initialization failed |
| lftconfig | NULL | 0 | 1030 | 11 | No software key- board map file pointer in the DDS struct |
| lftconfig | xmalloc | 0 | 1002 | 12 | No space for swkb map file names |
| lftconfig | copyin | > 0 | 1004 | 13 | Could not copy swkb map file names |
| lftconfig | lft- _swkbd- _init | > 0 | 1031 | 14 | swkbd initialization failed |
| lftconfig | lft_init | > 0 | 1005 | 15 | lft initialization failed |
| lftconfig | lft_ STREAMS _init | > 0 | 1011 | 16 | lft STREAMS initializa- tion failed |
| lftconfig | pincode | > 0 | 1012 | 17 | Could not pin code |
| lftconfig | NULL | 0 | 1013 | 18 | lft termination failed |
| lftconfig | NULL | 0 | 1014 | 19 | Invalid command |
| Table 2. List of Errors in the lftinit Module. | |||||
| DETECTED | FAILED | RC | ERROR | LOCATION | ERROR DESCRIPTION |
| lftinit | fp_open- dev | > 0 | 1020 | 1 | Could not open a display device driver |
| lftinit | get- _disp- _dataptr | > 0 | 1007 | 2 | Unable to get the phys_display data structure pointer |
| lftinit | xmalloc | 0 | 1002 | 3 | Could not allocate the vtm structure |
| lftinit | vttinit | > 0 | 1060 | 4 | Display device driver - initialization failed |
| lftinit | vttact | > 0 | 1061 | 5 | Display device driver - activation failed |
| lftinit | NULL | 0 | 1008 | 6 | No displays initialized |
| lftinit | NULL | 0 | 1009 | 7 | Default display did not initialize |
| lftinit | devswqry | > 0 | 1010 | 8 | Could not query the devsw table |
| lftinit | NULL | 0 | 1007 | 9 | The device has a bad status in devsw table or the dataptr=0 |
| lftinit | get- _devsw- _dataptr | > 0 | 1007 | 10 | Unable to get the phys_display data structure pointer |
| Table 3. List of Errors in the lftterm Module. | |||||
| DETECTED | FAILED | RC | ERROR | LOCATION | ERROR DESCRIPTION |
| lftterm | vttdact | > 0 | 1062 | 1 | Display device driver - deactivation failed |
| lftterm | vttterm | > 0 | 1063 | 2 | Display device driver - termination failed |
| Table 4. List of Errors in the lftfonts Module. | |||||
| DETECTED | FAILED | RC | ERROR | LOCATION | ERROR DESCRIPTION |
| lftfonts | xmalloc | 0 | 1002 | 1 | Could not allocate space for fonts |
| lftfonts | fp_open | > 0 | 1021 | 2 | Could not open the font file |
| lftfonts | NULL | 0 | 1041 | 3 | lft did not load any fonts |
| lftfonts | create- _fkproc | > 0 | 1043 | 4 | Could not create the font kernel process |
| lftfonts | fp_fstat | > 0 | 1022 | 5 | Could not stat the font file |
| lftfonts | fp_fstat | 0 | 1022 | 6 | Incorrect font file size |
| lftfonts | fp_lseek | >0 | 1023 | 7 | Font file seek error |
| lftfonts | xmalloc | 0 | 1002 | 8 | Could not allocate space for font data |
| lftfonts | fp_read | >0 | 1024 | 9 | Font file read error |
| lftfonts | NULL | 0 | 1041 | 10 | Unsupported variable width font |
| lftfonts | NULL | 0 | 1001 | 11 | lft_ptr is NULL |
| Table 5. List of Errors in the lftswkbd Module. | |||||
| DETECTED | FAILED | RC | ERROR | LOCATION | ERROR DESCRIPTION |
| lftswkbd | fp_open | >0 | 1021 | 1 | Could not open the software keyboard map file |
| lftswkbd | fp_fstat | >0 | 1022 | 2 | Could not stat swkbd map file |
| lftswkbd | fp_lseek | >0 | 1023 | 3 | swkbd file seek error |
| lftswkbd | NULL | 0 | 1002 | 4 | Could not allocate space for the swkbd file |
| lftswkbd | fp_read | >0 | 1024 | 5 | Read of the swkbd map file failed |
| Table 6. List of Errors in the cfglft Module. | |||||
| DETECTED | FAILED | RC | ERROR | LOCATION | ERROR DESCRIPTION |
| cfglft | odm- _get_list | -1 | 1102 | 1 | Could not receive list of adapters from the PdAt |
| cfglft | odm- _get_list | -1 | 1103 | 2 | ODM failure re- trieving list of displays from the CuDv |
| cfglft | NULL | 0 | 1105 | 3 | Found no available displays for the lft |
| cfglft | malloc | 0 | 1106 | 4 | Could not malloc memory for the dds structure |
| cfglft | getattr | 0 | 1101 | 5 | No font*_path attribute found in either CuAt or PdAt |
| cfglft | NULL | 0 | 1107 | 6 | No fonts found in the ODM belonging to the lft |
| cfglft | getattr | 0 | 1101 | 7 | No default_disp attribute found in either CuAt or PdAt |
| cfglft | odm- _get_list | -1 | 1103 | 8 | ODM failure in retrieving list of adapters from the CuDv |
| cfglft | get- _devno | >0 | 1108 | 9 | Failed to get the devno of a display |
| cfglft | putattr | -1 | 1101 | 10 | Failed to update the CuAt with a new default_disp value. |
| cfglft | odm- _get_list | -1 | 1102 | 11 | ODM failure retriev- ing list of keyboards from PdAt |
| cfglft | odm- _get_obj | -1 | 1103 | 12 | ODM failure re- trieving keyboard information from CuDv |
| cfglft | get- _devno | >0 | 1108 | 13 | Failed to get the devno of a keyboard |
| cfglft | NULL | -1 | 1122 | 14 | No available system keyboard found |
| cfglft | odm_get_list | -1 | 1102 | 15 | ODM failure re- trieving list of fkproc attributes from PdAt |
| cfglft | get- _attrval | 0 | 1101 | 16 | Found no swkb_path attribute in either CuAt or PdAt |
| cfglft | odm- _get_first | <= 0 | 1102 | 17 | Found no swkb_path attribute in PdAt |
| cfglft | open | -1 | 1109 | 18 | Failed to open the system keyboard file |
| cfglft | mknode | >0 | 1110 | 19 | mknode failed for the lft special file /dev/lft0 |
| cfglft | stat | >0 | 1110 | 20 | stat failed on lft special file /dev/lft0 |
| cfglft | unlink | >0 | 1110 | 21 | unlink failed on lft special file /dev/lft0 |
| cfglft | mknode | >0 | 1110 | 22 | mknode failed for the lft special file /dev/lft0 after unlink- ing the previous special file |
| cfglft | NULL | 0 | 1111 | 23 | Illegal parameters passed into cfglft |
| cfglft | NULL | 0 | 1112 | 24 | Logical device name passed into cfglft is invalid |
| cfglft | odm_- initialize | -1 | 1100 | 25 | ODM failed to initialize |
| cfglft | odm- _get_first | 0 | 1103 | 26 | Failed to find the logical name for the lft in the CuDv |
| cfglft | odm- _get_first | -1 | 1103 | 27 | ODM failure re- trieving logical name of lft from the CuDv |
| cfglft | odm- _get_first | 0 | 1104 | 28 | Failed to find the PdDv class associated with the lft |
| cfglft | odm- _get_first | -1 | 1104 | 29 | ODM failure re- trieving PdDv class for the lft |
| cfglft | NULL | 0 | 1113 | 30 | lft is listed as missing in the CuDv |
| cfglft | build_dds | >0 | 1114 | 31 | The build_dds function had an error building the dds |
| cfglft | loadext | 0 | 1115 | 32 | Failure occurred while trying to load the lft driver |
| cfglft | genmajor | -1 | 1116 | 33 | Failure occurred creating the major number for the lft |
| cfglft | genminor | 0 | 1117 | 34 | Failure occurred creating the minor number for the lft |
| cfglft | sysconfig | -1 | 1118 | 35 | Failure occurred while initializing the lft driver |
| cfglft | make- _special- _file | >0 | 1110 | 36 | Failure occurred while creating the lft special file |
| cfglft | lft_auto- push | >0 | 1120 | 37 | Failure occurred during auto push of STREAMS modules |
| cfglft | odm- _change _obj | -1 | 1103 | 38 | Failure occurred while updating the lft status to available |
| cfglft | getattr | 0 | 1101 | 39 | Failure getting syscons attribute |
| cfglft | odm- _run- _meth- ods | -1 | 1118 | 40 | odm_run_method failed doing mkitab |
| cfglft | sysconfig | >0 | 1115 | 41 | Error loading 1dterm module |
| cfglft | sysconfig | >0 | 1115 | 42 | Error loading tioc module |
| cfglft | stream- _ioctl | >0 | 1115 | 43 | Error in ioctl to SAD to auto push modules |
| cfglft | loadext | 0 | 1121 | 44 | Failure occurred while unloading the lft driver |
| cfglft | sysconfig | -1 | 1119 | 45 | Failure occurred while terminating the lft driver |
| cfglft | odm_run_methods | -1 | 1118 | 46 | odm_run_methods failed doing rmitab |
| Table 7. List of Errors in the startlft Module. | |||||
| DETECTED | FAILED | RC | ERROR | LOCATION | ERROR DESCRIPTION |
| startlft | odm_- initialize | -1 | 1200 | 1 | ODM failed to initialize |
| startlft | odm_- get_first | 0 | 1203 | 2 | No lft driver infor- mation found in the PdDv class |
| startlft | odm_- get_first | -1 | 1203 | 3 | ODM failure re- trieving PdDv class for lft |
| startlft | odm_- get_first | -1 | 1201 | 4 | ODM failure re- trieving information from the PdAt class |
| startlft | odm_- get_first | -1 | 1202 | 5 | ODM failure re- trieving information from the CuDv class |
| startlft | NULL | 0 | 1204 | 6 | No available displays found for the lft |
| startlft | odm_- run_- method | >0 | 1205 | 7 | Error occurred attempting to define the lft |
| Table 8. List of Errors in the ucfglft Module. | |||||
| DETECTED | FAILED | RC | ERROR | LOCATION | ERROR DESCRIPTION |
| pop_mod | load_ext | 0 | 1300 | 1 | Failed to get kmid for STREAMS module |
| pop_mod | NULL | 0 | 1301 | 2 | Unknown STREAMS module |
| pop_mod | sysconfig | <0 | 1302 | 3 | Sysconfig failed attempting to unconfigure STREAMS module |
| pop_mod | loadext | 0 | 1300 | 4 | Failed to unload a STREAMS module |
| ucfglft | odm_- open_- class | -1 | 1303 | 1 | Open of the CuDv class in the ODM failed |
| ucfglft | odm_- get_first | 0 | 1304 | 2 | Failed to find any objects belonging to LFT in the CuDv |
| ucfglft | odm_- get_first | -1 | 1305 | 3 | ODM error occurred while retrieving object from CuDv |
| ucfglft | odm_- get_first | 0 | 1306 | 4 | Failed to find any objects belonging to LFT in the PdDv |
| ucfglft | odm_- get_first | -1 | 1307 | 5 | ODM error occurred while retrieving object from PdDv |
| ucfglft | getmajor | -1 | 1308 | 6 | Error occurred attempting to get the major number for LFT |
| ucfglft | getminor | 0 | 1309 | 7 | Error occurred attempting to get the minor number for LFT |
| ucfglft | loadext | 0 | 1310 | 8 | Error occurred attempting to unload the LFT driver |
| ucfglft | odm_- change_ obj | -1 | 1311 | 9 | Error occurred updating LFT status to defined |
| ucfglft | odm_- close_ class | -1 | 1312 | 10 | Error occurred closing the CuDv class of the ODM |
| Table 9. List of Errors in the GT1X Device Driver. | |||||
| DETECTED | FAILED | RC | ERROR | LOCATION | ERROR DESCRIPTION |
| config.c | xmalloc | ENOMEM | 1001 | 1 | Unable to xmalloc define device struct |
| define.c | xmalloc | ENOMEM | 1001 | 1 | Unable to xmalloc phys_display struct |
| define.c | xmalloc | ENOMEM | 1001 | 2 | Unable to xmalloc ddf structure |
| define.c | dev- swadd | >0 | 1003 | 3 | Unable to add driver to device switch table |
| define.c | NULL | ENODEV | 1007 | 4 | Phys_display structure not found for device |
| open.c | i_init | >0 | 1006 | 1 | Unable to register SLIH |
| open.c | setjmpx | EXCEPT- _IO_SGA | 1004 | 2 | Unable to register parity handler |
| ioctl.c | NULL | EINVAL | 1002 | 1 | Invalid ioctl command |
| interrupt.c | setjmpx | EXCEPT- _IO_SGA | 1004 | 1 | SGA Bus I/O Exception |
| draw.c | setjmpx | EXCEPT- _IO_SGA | 1004 | 1 | SGA Bus I/O Exception |
| draw.c | setjmpx | EXCEPT- _IO | 1004 | 2 | SGA Bus I/O Exception |
| load_pal.c | setjmpx | EXCEPT- _IO_SGA | 1004 | 1 | SGA Bus I/O Exception |
| reset.c | setjmpx | EXCEPT- _IO_SGA | 1004 | 1 | SGA Bus I/O Exception |
| vtt_act.c | NULL | EINVAL | 1000 | 1 | Invalid terminal mode specified |
| vtt_defc.c | xmalloc | ENOMEM | 1001 | 1 | Unable to xmalloc cursor bit map |
| vtt_defc.c | xmalloc | ENOMEM | 1001 | 2 | Unable to xmalloc cursor inverted bit map |
| vtt_init.c | xmalloc | ENOMEM | 1001 | 1 | Unable to xmalloc local driver data (1d) |
| vtt_init.c | load- _font- _table | EXCEPT- _IO_SGA | 1004 | 2 | Unable to load aix character font |
| vtt_init.c | xmalloc | ENOMEM | 1001 | 3 | Unable to xmalloc presentation space |
| vtt_init.c | setjmpx | EXCEPT- _IO_SGA | 1004 | 4 | SGA Bus I/O Exception |
| vtt_scr.c | setjmpx | EXCEPT- _IO_SGA | 1004 | 1 | SGA Bus I/O Exception |
| Table 10. List of Errors in the vtt2drvr Module Color gda/Gray gda Device Driver. | |||||
| DETECTED | FAILED | RC | ERROR | LOCATION | ERROR DESCRIPTION |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 1 | Unable to set parity handler |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 2 | Unable to set parity handler |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 3 | Unable to set parity handler |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 4 | Unable to set parity handler |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 5 | Unable to set parity handler |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 6 | Unable to set parity handler |
| vtt2drvr | NULL | NULL | 1002 | 7 | Neither GRAPHICS nor KSR mode specified |
| vtt2drvr | NULL | !KSR- _MODE | 1002 | 8 | Not in KSR- _MODE |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 9 | Unable to set parity handler |
| vtt2drvr | NULL | NULL | 1004 | 10 | Bad Command specified |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 11 | Unable to set parity handler |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 12 | Unable to set parity handler |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 13 | Unable to set parity handler |
| vtt2drvr | xmalloc | NULL | 1001 | 14 | Could not alloc memory for local data |
| vtt2drvr | xmalloc | NULL | 1001 | 15 | Could not alloc memory for presentation space |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 16 | Unable to set parity handler |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 17 | Unable to set parity handler |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 18 | Unable to set parity handler |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 19 | Unable to set parity handler |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 20 | Unable to set parity handler |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 21 | Unable to set parity handler |
| vtt2drvr | xmalloc | NULL | 1001 | 22 | Could not alloc memory for pd |
| vtt2drvr | xmalloc | NULL | 1001 | 23 | Unable to set parity handler |
| vtt2drvr | talloc | NULL | 1005 | 24 | Could not alloc timer for device |
| vtt2drvr | setjmpx | EXCEPT- _IO | 1000 | 25 | Unable to set parity handler |
| vtt2drvr | dev- swadd | >0 | 1006 | 26 | Could not add to dev switch table |
| vtt2drvr | devswqry | NULL | 1007 | 27 | Null physical disp list |
| vtt2drvr | copyin | !NULL | 1008 | 28 | Could not copy buffer |
| vtt2drvr | copyin | !NULL | 1008 | 29 | Could not copy buffer |
| vtt2drvr | copyout | !NULL | 1009 | 30 | Could not copy buffer |
| vtt2drvr | NULL | NULL | 1004 | 31 | Invalid query option |
| vtt2drvr | NULL | NULL | 1004 | 32 | Invalid command |
| vtt2drvr | devswqry | NULL | 1007 | 33 | Null physical display list |
| vtt2drvr | NULL | DMA- _FAIL | 1010 | 34 | Invalid DMA channel ID |
| vtt2drvr | i_init | !INTR- _SUCC | 1011 | 35 | Could not set interrupt data |
| vtt2drvr | devswqry | NULL | 1007 | 36 | Null physical display list |
| vtt2drvr | NULL | NULL | 1013 | 37 | Device is in use |
| vtt2drvr | xmalloc | NULL | 1001 | 38 | Could not allo- cate dds stuff |
| vtt2drvr | devswqry | NULL | 1007 | 39 | Null physical display list |
| vtt2drvr | NULL | NULL | 1004 | 40 | Invalid command |
| vtt2drvr | devswqry | NULL | 1007 | 41 | Null physical display list |
| vtt2drvr | NULL | NULL | 1007 | 42 | Do not know which pd to release |
| vtt2drvr | devswdel | >0 | 1014 | 43 | Could not delete entry from devsw table |
| Table 11. List of Errors in the vtt2intr Module Color gda/Gray gda Device Driver. | |||||
| DETECTED | FAILED | RC | ERROR | LOCATION | ERROR DESCRIPTION |
| vtt2intr | setjmpx | EXCEPT- _IO | 1000 | 1 | Unable to set parity handler |