| Explanation | Progress indicator. A 1.0 GB 16-bit SCSI disk drive being identified or configured. |
| System Action | The configuration method for the 1.0 GB 16-bit SCSI disk drive is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A 1.1 GB 8-bit SCSI disk drive being identified or configured. |
| System Action | The configuration method for the 1.1 GB 8-bit SCSI disk drive is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A 1.1 GB 16-bit SCSI disk drive is being identified or configured. |
| System Action | The configuration method for the 1.1 GB 16-bit SCSI disk drive is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A 1.1 GB 16-bit differential SCSI disk drive is being identified or configured. |
| System Action | The configuration method for the 1.1 GB 16-bit differential SCSI disk drive is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A 2.2 GB 8-bit SCSI disk drive is being identified or configured. |
| System Action | The configuration method for the 2.2 GB 8-bit SCSI disk drive is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A 2.2 GB 16-bit SCSI disk drive is being identified or configured. |
| System Action | The configuration method for the 2.2 GB 16-bit SCSI disk drive is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A 2.2 GB 16-bit differential SCSI disk drive is being identified or configured. |
| System Action | The configuration method for the 2.2 GB 16-bit differential SCSI disk drive is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A 4.5 GB 16-bit SCSI disk drive is being identified or configured. |
| System Action | The configuration method for the 4.5 GB 16-bit SCSI disk drive is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A 4.5 GB 16-bit differential SCSI disk drive is being identified or configured. |
| System Action | The configuration method for the 4.5 GB 16-bit differential SCSI disk drive is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. An L2 cache is being identified or configured. |
| System Action | The configuration method for the L2 cache is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A POWER GXT150M graphics adapter is being identified and configured. |
| Explanation | Progress indicator. An unknown adapter is being identified or configured. |
| System Action | The configuration method for an unknown adapter is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. Graphic slot bus configuration is executing. |
| System Action | The configuration method for the graphic slot bus is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | The IBM ARTIC960 device is being configured. |
| System Action | The configuration method for the IBM ARTIC960 is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | A video capture adapter is being configured. |
| System Action | The configuration method for a video capture adapter is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . (Hardware failures could include device failure, socketed parts incorrectly inserted or missing, or daughter card incorrectly attached or missing.) If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. (Software failure could include a level of software that does not support a new daughter card.) You have completed these procedures. |
| Explanation | The Ultimedia Services audio adapter is being configured. This LED displays briefly on the panel. |
| System Action | The configuration method for the Ultimedia Services audio adapter is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. System memory is being configured. |
| Explanation | The Ethernet High-Performance LAN adapter is being configured. This LED displays briefly on the panel. |
| System Action | The configuration method for the Ethernet High-Performance LAN adapter is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Unknown read/write optical drive type is being configured. |
| System Action | The configuration method for an unknown read/write optical drive type is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. An unknown disk or SCSI device is being identified or configured. |
| System Action | The configuration method for an unknown disk or SCSI device is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. An unknown disk is being identified or configured. |
| System Action | The configuration method for an unknown disk is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. An unknown CD-ROM or SCSI device driver is being identified or configured. |
| System Action | The configuration method for an unknown CD-ROM or SCSI device driver being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. An unknown tape is being identified or configured. |
| System Action | The configuration method for an unknown tape is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. An unknown display is being identified or configured. |
| System Action | The configuration method for an unknown display is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. An unknown input device is being identified or configured. |
| System Action | The configuration method for an unknown input device is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. An asynchronous device is being identified or configured. |
| System Action | The configuration method for an asynchronous device is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A parallel printer is being identified or configured. |
| System Action | The configuration method for an unknown parallel printer is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. An unknown parallel device is being identified or configured. |
| System Action | The configuration method for an unknown parallel device is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. An unknown diskette drive type is being identified or configured. |
| System Action | The configuration method for an unknown diskette drive is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A PTY is being identified or configured. |
| System Action | The configuration method for an unknown PTY is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | An unknown SCSI initiator type is being configured. |
| System Action | The configuration method for an unknown SCSI initiator type is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference .If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A 7 GB tape drive is being identified or configured. |
| System Action | The configuration method is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. The multimedia SCSI CD-ROM is being identified or configured. |
| System Action | When running the multimedia SCSI CD-ROM an error will occur saying that you can not recover, and the system will halt. |
| User Action | If the system halts with the above action, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If this action fails, report the failure to your hardware/software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A 540 MB SCSI disk drive is being configured. |
| Explanation | Progress indicator. A PS/2 keyboard is being configured. |
| Explanation | Progress indicator. The 1080 MB SCSI disk drive is being identified or configured. |
| System Action | When running the 1080 MB SCSI disk drive an error will occur saying that you cannot recover, and the system will halt. |
| User Action | If the system halts with the above action, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If this action fails, report the failure to your hardware/software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A PCI Ethernet device driver is being identified or configured. |
| System Action | The configuration method is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. An IsoFDD adapter is being identified or configured. |
| System Action | The configuration method is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference . If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures. |
| Explanation | Progress indicator. A Power Management chip is being configured. |
| Explanation | Progress indicator. A 16 GB 4mm Tape Auto Loader is being configured. |
| Explanation | Progress indicator. A PCI Fast/Wide Single-Ended SCSI I/O adapter is being identified or configured. |
| System Action | The configuration method for the SCSI controller/adapter is being run. If an irrecoverable error occurs, the system will halt and the operator panel displays a steady 746 value. |
| User Action | If the system halts with the above action, try powering off attached SCSI devices. If this resolves the problem, check that each SCSI device has a unique SCSI id, and that cabling and termination are correct. Otherwise, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference. |
| Explanation | Progress indicator. A PCI Fast/Wide Differential SCSI I/O adapter is being identified or configured. |
| System Action | The configuration method for the SCSI controller/adapter is being run. If an irrecoverable error occurs, the system will halt and the operator panel displays a steady 747 value. |
| User Action | If the system halts with the above action, try powering off attached SCSI devices. If this resolves the problem, check that each SCSI device has a unique SCSI id, and that cabling and termination are correct. Otherwise, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference. |
| Explanation | Progress indicator. An MCA/CHRP systems keyboard/mouse adapter is being configured. |
| Explanation | Progress indicator. 7331 model 205 tape library is being configured. |
| Explanation | Progress indicator. An ISA bus Token Ring adapter is being configured. |
| Explanation | Progress indicator. A PCI Auto LANstreamer Token Ring adapter is being configured. |
| Explanation | Progress indicator. A PCI RAID adapter is being configured. |
| Explanation | Progress indicator. A 1.1 GB FastWide SCSI SE disk drive is being configured. |
| Explanation | Progress indicator. A 2.2 GB Fast/Wide SCSI SE disk drive is being configured. |
| Explanation | Progress indicator. A 4.5 GB Fast/Wide SCSI SE disk drive is being configured. |
| Explanation | Progress indicator. A 13 GB 1/4 inch tape drive is being configured. |
| Explanation | Progress indicator. A 540 MB SCSI drive is being configured. |
| Explanation | Progress indicator. A 1080 MB SCSI disk is being configured. |
| Explanation | Progress indicator. An ISA bus Ethernet adapter is being configured. |
| Explanation | Progress indicator. The SCSI adapter function of the LSA card is being configured. |
| Explanation | Progress indicator. The Ethernet adapter function of the LSA card is being configured. |
| Explanation | Progress indicator. A 4.5 GB Fast/Wide (F/W) SCSI SE disk drive is being identified or configured. |
| System Action | The configuration method for the SCSI disk drive is being run. If an irrecoverable error occurs, the system will halt. |
| User Action | If the system halts with the above action, try powering off attached SCSI devices. If this resolves the problem, check that each SCSI device has a unique SCSI id, and that cabling and termination are correct. Otherwise, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference. |
| Explanation | Progress indicator. A 9.1 GB Fast/Wide (F/W) SCSI SE disk drive is being identified or configured. |
| System Action | The configuration method for the SCSI disk drive is being run. If an irrecoverable error occurs, the system will halt. |
| User Action | If the system halts with the above action, try powering off attached SCSI devices. If this resolves the problem, check that each SCSI device has a unique SCSI id, and that cabling and termination are correct. Otherwise, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference. |
| Explanation | Progress indicator. A 9.1 GB SCSI Differential disk drive is being configured. |
| System Action | The configuration method for the SCSI Differential disk drive is being run. If an irrecoverable error occurs, the system will halt. |
| User Action | If the system halts with the above action, try powering off attached SCSI devices. If this resolves the problem, check that each SCSI device has a unique SCSI id, and that cabling and termination are correct. Otherwise, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference. |
| Explanation | Progress indicator. An MVP PCI power graphics adapter is being configured. |
| Explanation | Progress indicator. An IBM PCI Token-Ring Adapter is being configured. |
| Explanation | Progress indicator. A 10/100 Mbps PCI Ethernet device driver is being identified or configured. |
| System Action | The configuration method is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference. If these procedures find a problem, report the problem to your hardware service organization. Otherwise, report the problem to your software service organization, and then stop. You have completed these procedures.> |
| Explanation | Progress indicator. A 1 GB 16 bit SE SCSI disk drive is being configured. |
| Explanation | Progress indicator. An X.25 Interface co-processor adapter, ISA bus is being configured. |
| Explanation | Progress indicator. A 4-port multiprotocol communications controller, ISA bus is being configured. |
| Explanation | Progress indicator. A 1.2 GB hardfile is being configured. |
| Explanation | Progress indicator. A 4mm DDS-2 Tape Autoloader is being configured. |
| Explanation | Progress indicator. A 2160 MB SCSI disk drive is being configured. |
| Explanation | Progress indicator. An ISA 8-port EIA 232/RS 422 adapter is being configured. |
| Explanation | Progress indicator. A GXT250P/GXT255P graphic adapter is being configured. |
| Explanation | Progress indicator. A GXT500P/GXT550P graphics adapter is being configured. |
| Explanation | Progress indicator. An Ultimedia video capture adapter is being configured. |
| Explanation | Progress indicator. A 2.6 GB external optical drive is being configured. |
| Explanation | Progress indicator. A multi-bus integrated Ethernet adapter is being configured. |
| Explanation | Progress indicator. A 2.2 GB SCSI disk drive is being configured. |
| Explanation | Progress indicator. A 4.5 GB SCSI disk drive is being configured. |
| Explanation | Progress indicator. A 9.1 GB SCSI disk drive is being configured. |
| Explanation | Progress indicator. A 10/100 Mbps Ethernet PX MCA device driver is being identified or configured. |
| System Action | The configuration method is being run. If an irrecoverable error occurs, the system halts. |
| User Action | If the system halts with this value, go to "Hardware Diagnostics" in in AIX Problem Solving Guide and Reference. |
| Explanation | Progress indicator. A SysKonnect PCI FDDI adapter is being configured. |
| Explanation | Progress indicator. A SysKonnect MCA FDDI adapter is being configured. |
| Explanation | Progress indicator. A Turboways 155 UTP ATM adapter is being configured. |
| Explanation | Progress indicator. A Turboways 155 MPEG ATM adapter is being configured. |
| Explanation | Progress indicator. A 2-port WAN adapter is being configured. |
| Explanation | Progress indicator. A business audio subsystem is being configured. |
| Explanation | Progress indicator. A 1.1 GB SCSI-2 disk drive is being configured. |
| Explanation | Progress indicator. A 2.2 GB SCSI-2 disk drive is being configured. |
| Explanation | Progress indicator. A 4.4 GB SCSI-2 disk drive is being configured. |