[ Previous | Next | Contents | Glossary | Home | Search ]
AIX Version 4.3 Commands Reference, Volume 6

xmodem Command

Purpose

Transfers files with the xmodem protocol, detecting data transmission errors during asynchronous transmission.

Syntax

xmodem { -s -r } FileName

Description

The xmodem shell command is used with the Asynchronous Terminal Emulation (ATE) program to transfer a file, designated by the FileName parameter, using the xmodem protocol.

The xmodem protocol is an 8-bit transfer protocol to detect data transmission errors and retransmit the data. The workstation sending data waits until the remote system sends a signal indicating it is ready to receive data.

After the receiving system get data, it returns an acknowledgment to the sending system. In the ATE program the receiving system times out if data is not received within 90 seconds after the file transfer is initiated.

Sending and receiving with the xmodem command are complementary operations. One system must be set to send while the other is set to receive. Use the xmodem command on the remote system in combination with the send subcommand or the receive subcommand from the ATE Connected Main Menu on the local system.

To interrupt an xmodem file transfer, press the Ctrl-X key sequence.

Flags

-r Receives data from the local workstation.
-s Sends data to the local workstation.

Examples

Sending a File with the xmodem Protocol

To send the file myfile with the xmodem protocol, use the ate command and the connect or directory subcommand to establish a connection to the remote system.

  1. After logging in to the remote system and before pressing the MAINMENU_KEY (usually the Ctrl-Vkey sequence) to return to ATE on the local system, enter:
    xmodem -r myfile
    at the shell command line. The xmodem protocol starts receive mode on the remote system.
  2. Press the MAINMENU_KEY to return to ATE on the local system.

    The ATE Connected Main Menu displays.

  3. Enter the send subcommand at the prompt on the ATE Connected Main Menu:
    s myfile
    The send subcommand instructs the local system to send myfile to the remote system. After transferring the file, the ATE Connected Main Menu displays.

Receiving a File with the xmodem Protocol

Receive the file infile from a remote system using xmodem protocol with the ate command and the connect or directory subcommand establishing a connection to the remote system.

  1. After logging in to the remote system and before pressing the MAINMENU_KEY (usually the Ctrl-V key sequence) to return to ATE on the local system, enter:
    xmodem -s infile
    at the shell command line. The xmodem protocol starts, in send mode, on the remote system.
  2. Press the MAINMENU_KEY to return to ATE on the local system.

    The ATE Connected Main Menu displays.

  3. Enter the receive subcommand at the prompt on the ATE Connected Main Menu:
    r infile
    The receive subcommand instructs the local system to receive infile from the remote system. After transferring the file, the ATE Connected Main Menu displays.

File

ate.def
                          Contains ATE default values.

Related Information

The ate command.

The connect subcommand, directory subcommand, modify subcommand, send subcommand, receive subcommand.

How to Edit the ATE Default File in AIX Version 4.3 System User's Guide: Communications and Networks explains how to permanently change ATE defaults.

ATE Overview in AIX Version 4.3 System User's Guide: Communications and Networks introduces the ATE program, its menus, and its control keys.

ATE Overview for System Management in AIX Version 4.3 System Management Guide: Communications and Networks discusses tasks involved in managing ATE.


[ Previous | Next | Contents | Glossary | Home | Search ]