enscript Command

AIX Version 4.3 Commands Reference, Volume 2

enscript Command

Purpose

Converts text files to PostScript format for printing.

Syntax

enscript [-1 -2 -c -g -k -l -m -o -q -r -B -G -K -R ] [ -b Header ] [ -f Font ] [ -f0 CodeSet:Font ] [ -f1 CodeSet:Font ] [ -p Out ] [ -F Hfont ] [ -F0 CodeSet:Font ] [ -F1 CodeSet:Font ] [ -L Lines ] [ -M MediaName ] [ -X CodesetName ] [ SpoolerOptions ] [ File ... ]

Description

The enscript command reads a text file, converts it to PostScript format, and spools the file for printing on a PostScript printer. You can use this command to specify fonts, headings, limited formatting options, and spooling options.

For example:

enscript -daleph bubble.txt

prints a copy of the bubble.txt file on the printer called aleph, and

enscript -2r finder.c

prints a two-up landscape listing of the finder.c file on the default printer.

The ENSCRIPT environment variable can be used to specify defaults. The value of ENSCRIPT is parsed as a string of arguments before the arguments that are displayed on the command line. For example:

ENSCRIPT='-fTimes-Roman8'

sets your default body type size and font to 8-point Times Roman.

Information containing various media sizes for the psdit command and the enscript command are contained in the file /usr/lib/ps/MediaSizes.

The information required for each entry in the MediaSizes file can be obtained from the PostScript Printer Description, or PPD, file that matches the PostScript printer used with TranScript. The PPD files are available from Adobe Systems, Incorporated. The measurements extracted from the PPD files are expressed in a printer's measure called points. A printer's point is 1/72 of an inch.

Any line in the MediaSizes file beginning with an ASCII * (asterisk) is ignored when matching media-size names provided on the command line to the enscript command and the psdit command.

Each entry in the MediaSizes file contains either 8 or 9 fields. The first 8 fields are required for all entries. The 9th field is optional. Fields are separated by white space. The fields for each entry are as follows:

Field Name	Description
`EntryName`	Contains a character string to match against a media name provided with the -M flag with the enscript command or the psdit command.
`MediaWidth`	Specifies the media width in points.
`MediaDepth`	Specifies the media depth in points.
`ImageableLLX`	Specifies the imageable lower left-hand corner x coordinate in points.
`ImageableLLY`	Specifies the imageable lower left-hand corner y coordinate in points.
`ImageableURX`	Specifies the imageable upper right-hand corner x coordinate in points.
`ImageableURY`	Specifies the imageable upper right-hand corner y coordinate in points.
`PageRegionName`	Specifies the PostScript sequence for the particular printer to identify the size of the imageable area.
`PaperTrayName`	Specifies the PostScript sequence for the particular printer to select a particular paper/media tray. This field is optional. Note: The sequence can be multiple PostScript operators or words for both the `PageRegionName` field and the `PaperTrayName` field. To specify such a sequence, use the ASCII " (double quote character) to delimit the entire sequence.

The following table shows examples of field entries in the MediaSizes file:

`Name`	`Width`	`Depth`	`llx`	`lly`	`urx`	`ury`	`Page-` `Region-` `Name`	`Paper-` `Tray-` `Name`
`Letter`	`612`	`792`	`18`	`17`	`597`	`776`	`Letter`
`Legal`	`612`	`1008`	`18`	`17`	`597`	`992`	`Legal`

PostScript Font Information

The PostScript Fonts for Transcript table shows the fonts available for the enscript command. The Font Name is specified with the -F and -f encscipt command flags. The alphabetic characters are case-sensitive:

PostScript Fonts for Transcript
Font Name	Font Family
AvantGarde-Book	AvantGarde
AvantGarde-Demi	AvantGarde
AvantGarde-DemiOblique	AvantGarde
AvantGarde-BookOblique	AvantGarde
Bookman-Demi	Bookman
Bookman-DemiItalic	Bookman
Bookman-Light	Bookman
Bookman-LightItalic	Bookman
Courier	Courier
Courier-Bold	Courier
Courier-BoldOblique	Courier
Courier-Oblique	Courier
Garamond-Bold	Garamond
Garamond-BoldItalic	Garamond
Garamond-Light	Garamond
Garamond-LightItalic	Garamond
Helvetica	Helvetica
Helvetica-Bold	Helvetica
Helvetica-Oblique	Helvetica
Helvetica-BoldOblique	Helvetica
Helvetica-Narrow	Helvetica
Helvetica-Narrow-Bold	Helvetica
Helvetica-Narrow-BoldOblique	Helvetica
Helvetica-Narrow-Oblique	Helvetica
LubalinGraph-Book	Lubalin
LubalinGraph-BookOblique	Lubalin
LubalinGraph-Demi	Lubalin
LubalinGraph-DemiOblique	Lubalin
Miryam-Iso	Miryam Iso
Miryam-IsoBold	Miryam Iso
Miryam-IsoBoldItalic	Miryam Iso
Miryam-IsoItalic	Miryam Iso
NarkissimIso	Narkissim Iso
NarkissimIso-Bold	Narkissim Iso
NarkissimIso-BoldItalic	Narkissim Iso
NarkissimIso-Italic	Narkissim Iso
NarkissTamIso	Narkiss Tam Iso
NarkissTamIso-Bold	Narkiss Tam Iso
NarkissTamIso-BoldItalic	Narkiss Tam Iso
NarkissTamIso-Italic	Narkiss Tam Iso
NewCenturySchlbk	NewCentury
NewCenturySchlbk-Bold	NewCentury
NewCenturySchlbk-Italic	NewCentury
NewCenturySchlbk-Roman	NewCentury
Optima	Optima
Optima-Bold	Optima
Optima-BoldOblique	Optima
Optima-Oblique	Optima
Palatino-Bold	Palatino
Palatino-BoldItalic	Palatino
Palatino-Italic	Palatino
Palatino-Roman	Palatino
Rokaa	Rokaa
Rokaa-Bold	Rokaa
Rokaa-BoldItalic	Rokaa
Rokaa-Italic	Rokaa
Setting	Setting
Setting-Bold	Setting
Setting-BoldItalic	Setting
Setting-Italic	Setting
ShalomIso	ShalomIso Iso
ShalomIso-Bold	ShalomIso Iso
ShalomIso-BoldItalic	ShalomIso Iso
ShalomIso-Italic	ShalomIso Iso
Souvenir-Demi	Souvenir
Souvenir-DemiItalic	Souvenir
Souvenir-Light	Souvenir
Souvenir-LightItalic	Souvenir
Times-Bold	Times
Times-BoldItalic	Times
Times-Italic	Times
Times-Roman	Times
Typing	Typing
Typing-Bold	Typing
Typing-BoldItalic	Typing
Typing-Italic	Typing
Symbol	(none)
ZapfChancery-MediumItalic	Zapf
ZapfDingbats	(none)

Parameters

SpoolerOptions

Provides options for spooling the print file. The following are the SpoolerOptions flags:

{-d \| -P}Queue	Queues the output to the named queue.
-nNumber	Produces the specified number of copies. The default is 1.
-tTitle	Sets job title for use on the first banner page.
File	Specifies the text file to be converted into PostScript format. If you leave this parameter blank, the enscript command reads from standard input.

Flags

-1	Sets in 1 column (the default).
-2	Sets in 2 columns.
-c	Truncates (cuts) lines that are longer than the page width. Normally, long lines are wrapped around to the following line on the page.
-g	Performs no function, but the -g flag is still accepted for backwards compatibility.
-k	Enables page prefeed (if the printer supports it). This allows simple documents (such as program listings in a single font) to print somewhat faster by keeping the printer running between pages.
-l	Simulates a line printer printing pages 66 lines long and omitting headers.
-m	Sends mail after the files are printed.
-o	Lists the missing characters if the enscript command cannot find characters in a font.
-q	Causes the enscript command to not report about what it is doing. The enscript command cannot report on pages, destination, omitted characters, and so on. Fatal errors are still reported to the standard error output.
-r	Rotates the output 90 degrees (landscape mode). Use this flag for output that requires a wide page or for program listings when used in conjunction with the -2 flag. The following example shows one way to get program listings: enscript -2r File . . .
-B	Omits page headings.
-G	Prints in gaudy mode, causing page headings, dates, and page numbers to be printed in a flashy style, at some slight performance expense.
-K	Disables page prefeed (the default).
-R	Prints in portrait mode (unrotated), which is the default.
-bHeader	Sets the string to be used for page headings to the value of the Header variable. The default header is constructed from the file name, its last modification date, and a page number.
-fFont	Sets the font to be used for the body of each page. The default is Courier10, unless the two-column rotated mode is used, in which case it defaults to Courier7. Notes: A PostScript font name (such as Times-Roman, Times-BoldItalic, Helvetica, Courier). A point size (1 point = 1/72 inch). Fonts are specified in this fashion: Courier-Bold8 is 8-point Courier Bold; Helvetica12 is 12-point Helvetica.
-f0 Codeset:Font	Sets the character codeset name, which is written into the PostScript file, and the SBCS font to use for the body of each page. The default is determined by the /usr/lib/ps/transcript.conf configuration file for each locale.
-f1 Codeset:Font	Sets the character codeset name, which is written into the PostScript file, and the MBCS font to use for the body of each page. The default is determined by the /usr/lib/ps/transcript.conf configuration file for each locale.
-pOut	Causes the PostScript file to be written to the named file rather than being spooled for printing. As a special case, entering the following will send the PostScript file to standard output: -p -
-FHfont	Sets the font to be used for page headings. The default is Courier Bold10. Note: Font specifications have two parts: A PostScript font name (such as Times-Roman, Times-BoldItalic, Helvetica, Courier). A point size (1 point = 1/72 inch). Fonts are specified in this fashion: Courier-Bold8 is 8-point Courier Bold; Helvetica12 is 12-point Helvetica.
-F0 Codeset:Font	Sets the character codeset name, which is written into the PostScript file, and the SBCS font to use for the header of each page. The default is determined by the /usr/lib/ps/transcript.conf configuration file for each locale.
-F1 Codeset:Font	Sets the character codeset name, which is written into the PostScript file, and the MBCS font to use for the header of each page. The default is determined by the /usr/lib/ps/transcript.conf configuration file for each locale.
-LLines	Sets the maximum number of lines to print on a page. The enscript command usually computes how many lines to put on a page based on point size. (It might put fewer per page than requested by the -L flag.)
-MMediaName	Specifies a media name to use to determine the amount of imageable area on the paper. The name provided is matched against entries in the MediaSizes file. For instance, `-M legal` would request a legal size of paper as the imageable area. If this flag is not used, the default size is letter size, which is 8.5 inches wide by 11.0 inches deep (21.6 cent. wide by 27.9 cent. deep).
-XCodesetName	Specifies the code set for the input data. By default, the input code set is determined by the nl_langinfo subroutine. If this flag is used, the codeset is determined by the CodesetName.

International Character Support

All characters not found in a font will be replaced with the character ? (question mark). For a complete list of characters that were not found, use the -o flag. The NLSvec file provides information about character translation.

Environment Variables

ENSCRIPT	Specifies a string of options to be used by the enscript command.
LPDEST	Specifies a printer destination. The -d spooler option overrides this environment variable.
PSLIBDIR	Provides a path name of a directory to use instead of the /usr/lib/ps directory for the enscript command prologue and font metric files.
PSTEMPDIR	Provides a path name of temporary directory to use instead of the /var/tmp directory of spooled temporary files.
TRANSCRIPT	Provides the absolute path name of a file to use, instead of the /usr/lib/ps/transcript.conf configuration file, for MBCS handling.

Files

*/usr/lib/ps/.afm**	Contains Adobe Font Metrics (AFM) files.
/usr/lib/ps/font.map	Contains the list of font names with their abbreviations.
/usr/lib/ps/enscript.pro	Contains prologue for enscript command files.
/usr/lib/ps/MediaSizes	Contains the default file used for media sizes.

Related Information

The col command, eqn command, lp command, managefonts command, nroff command, pic command, pr command, ps630 command, psdit command, refer command, tbl command, troff command.

The nl_langinfo subroutine.

NLSvec File provides information about character translation.