[ Previous | Next | Contents | Glossary | Home | Search ]
AIX Version 4.3 Commands Reference, Volume 1

ct Command

Purpose

Dials an attached terminal and issues a login process.

Syntax

ct -h ] [ -sSpeed ] [ -v ] [ -wNumber ] [ -xNumber ] TelephoneNumber ...

Description

The ct command is a Basic Networking Utilities (BNU) command that enables a user on a remote terminal, such as an 3161, to communicate with a workstation over a telephone line attached to a modem at each end of the connection. The user on the remote terminal can then log in and work on the workstation.

A user on the local system issues the ct command with the appropriate telephone number to call the modem attached to the remote terminal. When the connection is established, the ct command issues a login prompt that is displayed on the remote terminal. The user on the remote terminal enters a login name at the prompt and opens a new shell. The user at the remote terminal then proceeds to work on the workstation just like a local user.

The ct command is useful in the following situations:

If there are no free lines, the ct command displays a message to that effect and asks if the local user wants to wait for one. If the reply is no, the ct command hangs up. If the local user wants to wait for a free line, the ct command prompts for the number of minutes to wait. The ct command continues to dial the remote system at one-minute intervals until the connection is established or until the specified amount of time has elapsed.

In order to establish a ct connection, the remote user contacts the local user with a regular telephone call and asks the local user to issue the ct command. However, if such connections occur regularly at your site, your system administrator may prefer to set up BNU in such a way that a specified local system automatically issues the ct command to one or more specified terminals at certain designated times.

Notes:
  1. Before issuing the ct command, be certain that the remote terminal is attached to a modem that can answer the telephone.
  2. If the user issuing the ct command does not have root authority, the port used for the connection must be a shared or delayed port. Otherwise, the remote login will fail. For more information on shared and delayed ports, see the pshare and pdelay commands. In addition, for the ct command to succeed on a shared or delayed port, the user invoking the command must be a member of the UNIX-to-UNIX copy program (uucp) user group.

The ct command is not as flexible as the BNU cu command. For example, the user cannot issue commands on the local system while connected to a remote system through the ct command. However, the ct command does have two features not available with the cu command:

If the local user specifies alternate dialing paths by entering more than one number on the command line, the ct command tries each line listed in the BNU Devices file(s) (by default, the /etc/uucp/Devices file) until it finds an available line with appropriate attributes or runs out of entries. If there are no free lines, the ct command asks if it should wait for one and, if so, for how many minutes. The ct command continues to try to open the dialers at one-minute intervals until the specified time is exceeded. The local user can override this prompt by specifying a time with the -wNumber flag when entering the command.

After the user logs off, the ct command prompts the user on the remote terminal with a reconnect option; the system can either display a new login prompt or drop the line.

Flags

-h Prevents the ct command from hanging up the current line to answer an incoming call.
-sSpeed Specifies the rate at which data is transmitted. The default is 1200 baud.
-v Allows the ct command to send a running narrative to standard error output.
-wNumber Specifies the maximum number of minutes that the ct command is to wait for a line. The command then dials the remote modem at one-minute intervals until the connection is established or until the specified time has elapsed.
-xNumber Starts debugging, which displays detailed information about the command's execution on standard error output on the local system. The Number variable specifies the debugging level, and is a single digit from 0 to 9. The recommended debugging level is 9.
TelephoneNumber Specifies the telephone number of the modem attached to the remote terminal. The TelephoneNumber variable can include the digits 0 through 9, - (minus signs) representing delays, = (equal signs) representing secondary dial tones, * (asterisks), and # (pound signs). The telephone number can contain a maximum of 31 characters.

Examples

  1. To dial a modem attached to a remote terminal with an internal telephone number, enter:
    ct 41589
    The internal telephone number of 4-1589 is dialed. The - (hyphen) is optional. The system responds:
    Allocated dialer at 1200 baud
    Confirm hang_up? (y to hang_up)
  2. To dial a modem attached to a remote terminal with a local telephone number, enter:
    ct -w3 9=5553017
    The ct command dials the local telephone number of 555-3017, where dialing 9 is required to reach an outside dial tone. A three-minute wait is specified as the maximum number of minutes that the ct command is to wait for a line.
  3. To dial a modem attached to a remote terminal with a long-distance telephone number, enter:
    ct -w5 9=12345557003
    The command dials the long-distance telephone number of 1-234-555-7003, where 9 is required to reach an outside dial tone. A five-minute wait is specified as the maximum number of minutes that the ct command is to wait for a line.

Files

/usr/bin/ct Contains the ct command.
/etc/uucp/Devices Lists information about available devices.
/etc/uucp/Dialcodes Contains dialing code abbreviations.
/etc/uucp/Dialers Defines modem dialers.
/etc/uucp/Systems Lists accessible remote systems.
/etc/uucp/Sysfiles Specifies alternate files to be used as Systems, Devices, and Dialers files.

Related Information

The cu command, pdelay command, pshare command, tip command.


[ Previous | Next | Contents | Glossary | Home | Search ]