TOK Error Identifiers for the Error Log

This category of identifiers contains the following error labels:

TOK ADAP CHK     TOK ADAP ERR     TOK AUTO RMV

TOK BAD ASW      TOK BEACON1      TOK BEACON2

TOK BEACON3      TOK CONGEST      TOK DOWNLOAD

TOK DUP ADDR     TOK ERR5         TOK ERR10

TOK ERR15        TOK ESERR        TOK MC ERR

TOK NOMBUFS      TOK PIOERR       TOK RCVRY ENTER

TOK RCVRY EXIT   TOK RCVRY EXIT   TOK RCVRY TERM

TOK RMV ADAP1    TOK RMV ADAP2    TOK TX ERR

TOK WIRE FAULT   TOK WRAP TST

Go back to the categories of Error Identifiers.

TOK ADAP CHK

Error Description: ADAPTER ERROR

This error indicates that a Token-Ring adapter check has occurred.

DETAIL DATA

TOK ADAP ERR

Error Description: POTENTIAL DATA LOSS CONDITION

This error is logged when there may be downlevel Token-Ring equipment installed. A potential data loss condition is possible.

Refer to the Detail Data under TOK ADAP CHK.

TOK AUTO RMV

Error Description: AUTO REMOVAL

This error indicates that the adapter was a member of the beacon fault domain and removed itself to perform a self-test, which was unsuccessful.

Refer to the Detail Data under TOK ADAP CHK.

TOK BAD ASW

Error Description: MICROCODE PROGRAM ERROR

This error indicates an incompatible microcode and adapter.

Refer to the Detail Data under TOK ADAP CHK.

TOK BEACON1

Error Description: OPEN FAILURE

This error indicates that the adapter detected a beaconing condition on the ring during the insertion process.

Refer to the Detail Data under TOK ADAP CHK.

TOK BEACON2

Error Description: TOKEN-RING INOPERATIVE

This error indicates that the ring was in a beaconing condition for longer than the time allowed by the hard-error detection timer.

Refer to the Detail Data under TOK ADAP CHK.

TOK BEACON3

Error Description: TOKEN-RING TEMPORARY ERROR

This error indicates that ring was in a beaconing condition for less than 52 seconds and was then recovered.

Refer to the Detail Data under TOK ADAP CHK.

TOK CONGEST

Error Description: COMMUNICATIONS OVERRUN

This error indicates that the ring error monitor (REM) detected an adapter on the ring that is experiencing excessive congestion and is discarding a significant number of frames.

Refer to the Detail Data under TOK ADAP CHK.

TOK DOWNLOAD

Error Description: MICROCODE PROGRAM ABNORMALLY TERMINATED

This error indicates that the microcode download failed.

TOK DUP ADDR

Error Description: OPEN FAILURE

This error indicates that the adapter detected the presence of a station with its individual address on the ring during the insertion process.

Refer to the Detail Data under TOK ADAP CHK.

TOK ERR5

Error Description: OPEN FAILURE

This error indicates that an unknown adapter hardware error occurred during the insertion process.

Refer to the Detail Data under TOK ADAP CHK.

TOK ERR10

Error Description: AUTO REMOVAL

Refer to the Detail Data under TOK ADAP CHK.

TOK ERR15

Error Description: ADAPTER ERROR

This error indicates that the Token-Ring device handler caught an unknown system error.

Refer to the Detail Data under TOK ADAP CHK.

TOK ESERR

Error Description: EXCESSIVE TOKEN-RING ERRORS

This error indicates that the ring error monitor (REM) detected excessive soft errors for the ring.

Refer to the Detail Data under TOK ADAP CHK.

TOK MC ERR

Error Description: ADAPTER ERROR

This error indicates that the Token-Ring device handler has detected a Micro Channel error.

Refer to the Detail Data under TOK ADAP CHK.

TOK NOMBUFS

Error Description: RESOURCE UNAVAILABLE

This error indicates that a Token-Ring device handler request for an mbuf structure was denied.

Refer to the Detail Data under TOK ADAP CHK.

TOK PIO ERR

Error Description: ADAPTER ERROR

This error indicates that the Token-Ring device handler has detected a programmable input/output error.

Refer to the Detail Data under TOK ADAP CHK.

TOK RCVRY ENTER

Error Description: ADAPTER ERROR

This error indicates that the Token-Ring device handler has entered Network Recovery Mode.

TOK RCVRY EXIT

Error Description:

This error indicates that the Token-Ring device handler has exited Network Recovery mode successfully.

Refer to the Detail Data under TOK ADAP CHK.

TOK RCVRY TERM

Error Description: ADAPTER ERROR

This error indicates that the Token-Ring device handler has terminated Network Recovery mode.

Refer to the Detail Data under TOK ADAP CHK.

TOK RMV ADAP1

Error Description: OPEN FAILURE

This error indicates that the adapter received a Remove Ring Station MAC frame during the insertion process.

Refer to the Detail Data under TOK ADAP CHK.

TOK RMV ADAP2

Error Description: REMOVE ADAPTER COMMAND RECEIVED

This error indicates that the adapter received a Remove Adapter command from a LAN manager and left the LAN.

Refer to the Detail Data under TOK ADAP CHK.

TOK TX ERR

Error Description: ADAPTER ERROR

This error indicates that the Token-Ring device handler has detected a transmission error.

Refer to the Detail Data under TOK ADAP CHK.

TOK WIRE FAULT

Error Description: WIRE FAULT

This error indicates a wire-fault condition on the ring.

Refer to the Detail Data under TOK ADAP CHK.

TOK WRAP TST

Error Description: OPEN FAILURE

This error indicates that the adapter detected a problem on its lobe during the wrap-test portion of the insertion process.

Refer to the Detail Data under TOK ADAP CHK.