[ Previous | Next | Contents | Glossary | Home | Search ]
AIX Version 4.3 Problem Solving Guide and Reference

SLA Error Identifiers for the Error Log

This category of identifiers contains the following error labels:

SLA CRC ERR     SLA DRIVER ERR   SLA EXCEPT ERR
SLA FRAME ERR   SLA PARITY ERR   SLA PROG ERR
SLA SIG ERR

Go back to the categories of Error Identifiers.

SLA CRC ERR

Error Description: SLA LINK CHECK CRC ERROR

This error indicates that the CRC checksum for a frame is not correct.

DETAIL DATA

Sense Data The sense data consists of failure data that is analyzed by the Diagnostic Programs. The Status 1 and Status 2 fields are valid.

SLA DRIVER ERR

Error Description: SLA LINK CHECK FAULT IN LASER DRIVE

This error indicates that the optics card has detected a fault in the transmit driver.

DETAIL DATA

Sense Data The sense data consists of failure data that is analyzed by the Diagnostic Programs. The Status 1 and Status 2 fields are valid.

SLA EXCEPT ERR

Error Description: INTERNAL SERIAL LINK ADAPTER EXCEPTION

This error indicates that a PIO exception has been detected.

DETAIL DATA

Sense Data The sense data consists of failure data that is analyzed by the Diagnostic Programs. Neither the Status 1 nor the Status 2 field is valid.

SLA FRAME ERR

Error Description: SLA LINK CHECK POSSIBLE LOST FRAME

This error is logged whenever a frame is lost. The detected error can be either a response time out or a send count error.

DETAIL DATA

Sense Data The sense data consists of failure data that is analyzed by the Diagnostic Programs. If the Status 1 field is 0xFFFFFFFF and the Status 2 field is 0, then a response time out occurred. If the Status 1 field is 0 and the Status 2 field is 0xFFFFFFFF, then a send count error was detected.

SLA PARITY ERR

Error Description: SLA BUFFER PARITY ERROR

This error is logged when the SLA detects either a parity error in the TAG register or a parity error in the data buffer.

DETAIL DATA

Sense Data The sense data consists of failure data that is analyzed by the Diagnostic Programs. The Status 1 field and the Status 2 field are valid.

SLA PROG ERR

Error Description: SLA PROGRAMMING CHECK

This error is logged when the SLA detects a program check. This error can be caused if the receiver did not map enough space for the message or if there is an incorrect tag as the first TOD clock work area.

DETAIL DATA

Sense Data The sense data consists of failure data which is analyzed by the Diagnostic Programs. The Status 1 and Status 2 fields are valid.

SLA SIG ERR

Error Description: SLA LINK CHECK SIGNAL FAILURE

This error is logged when the SLA detects a signal error in excess of 1 second.

DETAIL DATA

Sense Data The sense data consists of failure data which is analyzed by the Diagnostic Programs. The Status 1 and Status 2 fields are valid.

[ Previous | Next | Contents | Glossary | Home | Search ]