Plan
Graduate Attributes
Categories
Fall Term 1
CHEM 103
★ 4.3
(fi 6)(either term,
3-1s-3/2)
Atoms and molecules, states of matter, chemistry of the elements. Prerequisite: Chemistry 30, or equivalent. Note: Restricted to Engineering students only. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 53.5 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
ENGG 100
★ 1.1
(fi 2)(either term,
.75-.75s-0)
An introduction to the Faculty of Engineering, the engineering profession, the skills required for academic success, and the fundamentals of leadership: study and life skills; time management and goal setting; interpersonal skills; career planning; engineering and society including elements of ethics, equity, concepts of sustainable development, environmental stewardship, and public safety.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I |
ENGG 130
★ 4.0
(fi 6)(either term,
3-0-2)
Equilibrium of planar systems. Analysis of statically determinate trusses and frames. Friction. Centroids and centres of gravity. Forces and moments in beams. Second moments of area. Note: Students in all sections of this course will write a common final examination. Corequisite: MATH 100.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
ENGL 199
★ 3.0
(fi 6)(either term,
3-0-0)
This course aims to develop the student's ability to provide effective written and oral information. It will focus on instruction in fundamental writing skills, including building effective sentences and paragraphs, and on learning to communicate clearly across a range of genres and media used in academic and professional contexts, including correspondence and presentations. Students will be introduced to the principles of information gathering, analysis, and citation. Note: Restricted to students in the Faculty of Engineering only.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | D |
MATH 100
★ 3.5
(fi 6)(either term,
3-0-1)
Review of numbers, inequalities, functions, analytic geometry; limits, continuity; derivatives and applications, Taylor polynomials; log, exp, and inverse trig functions. Integration, fundamental theorem of calculus substitution, trapezoidal and Simpson's rules. Prerequisites: Mathematics 30-1 and Mathematics 31. Notes: (1) Credit can be obtained in at most one of MATH 100, 113, 114, 117, 134, 144, 154, or SCI 100. (2) Students in all sections of this course will write a common final examination. (3) Restricted to Engineering students. Non-Engineering students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
PHYS 130
★ 3.8
(fi 6)(either term,
3-0-3/2)
Geometrical optics, optical instruments, oscillations, waves, sound, interference, diffraction. Prerequisites: Mathematics 30-1, Mathematics 31, Physics 30. Corequisite: MATH 100 or 113 or 114 or 117 or 134 or 144 or equivalent. Restricted to Engineering students. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
Winter Term 2
CHEM 105
★ 3.8
(fi 6)(either term,
3-0-3/2)
Rates of reactions, thermodynamics and equilibrium, coordination chemistry, electrochemistry, modern applications of chemistry. Prerequisite: CHEM 103 or 101. Note: Restricted to Engineering students only. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | D |
ENCMP 100
★ 3.8
(fi 6)(either term,
3-0-1.5)
Fundamentals of computer programming with emphasis on solving engineering problems. Structure and syntax of computer programs, variables, data types, data structures, control structures, functions, input/output operations, debugging, software development process.
Accreditation Units
Engineering Design: 21.3 Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I |
ENGG 160
★ 2.0
(fi 4)(either term or Spring/Summer,
1-0-2)
Fundamental design process and theory in a multidisciplinary context. Importance, in engineering design, of communications; team work; the engineering disciplines, career fields; professional responsibilities of the engineer including elements of ethics, equity, concepts of sustainable development and environmental stewardship, public and worker safety and health considerations including the context of the Alberta Occupational Health and Safety Act. Corequisite ENGL 199. This course is delivered in a blended format.
Accreditation Units
Engineering Design: 12.6 Units
Engineering Science and Engineering Design: 12.6 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I |
EN PH 131
★ 4.3
(fi 6)(either term,
3-1s-3/2)
Kinematics and dynamics of particles; gravitation; work and energy; linear momentum; angular momentum; systems of particles; introduction to dynamics of rigid bodies. Prerequisites: MATH 100 or 117, and ENGG 130. Corequisite: MATH 101 or 118. Restricted to Engineering students. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 26.8 Units
Engineering Science: 26.8 Units
Engineering Science and Engineering Design: 26.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I |
MATH 101
★ 3.5
(fi 6)(either term,
3-0-1)
Area between curves, techniques of integration. Applications of integration to planar areas and lengths, volumes and masses. First order ordinary differential equations: separable, linear, direction fields, Euler's method, applications. Infinite series, power series, Taylor expansions with remainder terms. Polar coordinates. Rectangular, spherical and cylindrical coordinates in 3-dimensional space. Parametric curves in the plane and space: graphing, arc length, curvature; normal binormal, tangent plane in 3- dimensional space. Volumes and surface areas of rotation. Prerequisite: MATH 100. Notes: (1) Credit can be obtained in at most one of MATH 101, 115, 118, 136, 146, 156 or SCI 100. (2) Students in all sections of this course will write a common final examination. (3) Restricted to Engineering students. Non-Engineering students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | I |
MATH 102
★ 3.5
(fi 6)(either term,
3-0-1)
Vectors and matrices, solution of linear equations, equations of lines and planes, determinants, matrix algebra, orthogonality and applications (Gram-Schmidt), eigenvalues and eigenvectors and applications, complex numbers. Prerequisite or corequisite: MATH 100. Notes: (1) Credit can be obtained in at most one of MATH 102, 125, or 127. (2) Students in all sections of this course will write a common final examination. (3) Restricted to Engineering students. Non-Engineering students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D |
Fall Term 3
CIV E 270
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Plane stress and strain; stress-strain relationships; stresses and deformations resulting from axial and transverse loads; buckling of columns; torsion of circular sections; combined stress; statically indeterminate problems. Laboratory to demonstrate mechanical properties and verify assumptions of analysis. Prerequisites: ENGG 130 and MATH 101.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | D |
MATH 209
★ 3.5
(fi 6)(either term,
3-0-1)
Partial differentiation, derivatives of integrals. Multiple integration using rectangular, cylindrical, and spherical coordinates. Vector Field Theory. Prerequisite: MATH 101. Prerequisite or corequisite: MATH 102. Notes: (1) This course may not be taken for credit if credit has already been obtained in MATH 215, MATH 315, MATH 317 or MA PH 351. (2) Students in all sections of this course will write a common final examination. (3) Restricted to Engineering students. Non-Engineering students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D |
STAT 235
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-1.5)
Descriptive data analysis. Calculus of Probability. Binomial, multinomial, Poisson, normal, beta, exponential, gamma, hypergeometric, and Weibull distributions. Sampling distributions. Estimation, testing hypotheses, goodness-of-fit tests, and one-way analysis of variance. Linear correlation and regression. Sampling. Quality control. Use of a microcomputer software package for statistical analyses in engineering applications. Prerequisite: MATH 100. Corequisite: MATH 101. Notes: (1) This course may not be taken for credit if credit has already been obtained in one of STAT 151, 161, 222, 265, 266, 276, 281; KIN 109, PEDS 109, PSYCH 211, PTHER 352, SCI 151 or SOC 320. (2) Intended for Engineering students. (2) Intended for Engineering students. Other students who take this course will receive 3.0 units.
Accreditation Units
Math and Natural Sciences: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I |
MEC E 240
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Energy and energy transfer. Properties of pure substances. Energy analysis of closed systems and control volumes. The second law of thermodynamics, entropy, and exergy. Prerequisite: MATH 101. Credit can only be granted for one of CH E 243 or MEC E 240.
Accreditation Units
MEC E 200
★ 2.0
(fi 4)(either term or Spring/Summer,
1-2s-0)
Introduction to the profession of mechanical engineering with special emphasis of industries in Alberta, including coverage of elements of ethics, equity, concepts of sustainable development and environmental stewardship, public and worker safety and health considerations including the context of the Alberta Occupational Health and Safety Act. Selected guest speakers on design problems in mechanical engineering. Communication skills including written and oral presentations.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I |
MEC E 250
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Moments of inertia. Kinematics and kinetics of rigid body motion, energy and momentum methods, impact, mechanical vibrations. Prerequisites: ENGG 130, EN PH 131 and MATH 101. There is a consolidated exam.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I |
Winter Term 4
ECE 209
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-3/2)
Physical concepts of passive circuit elements, Kirchhoff's laws and DC circuit equations. Energy concepts, time domain analysis of AC circuits. Impedance, complex numbers and phasor algebra. AC power concepts, resonance, three phase circuits, introduction to machines. Credit may be obtained in only one of ECE 209, E E 239, ECE 202, or E E 240, unless approved by the Department.
Accreditation Units
Engineering Design: 11.8 Units
Engineering Science and Engineering Design: 47.2 Units
MAT E 202
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1.5s/2-)
An introduction to the science of materials relating their mechanical, thermal, electronic, and chemical properties to atomic, molecular, and crystal structure. Ceramic and metallic crystals, glasses, polymers, and composite materials. Multi-phase materials, phase transformations, and strengthening processes. Laboratories and seminars include mechanical properties of materials, microstructure, heat treatment of steel, and hands on design experiments. Prerequisite: CHEM 105 or consent of Department.
Accreditation Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | D | I | I | I |
MATH 201
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-1)
First-order equations; second-order linear equations: reduction of order, variation of parameters; Laplace transform; linear systems; power series; solution by series; separation of variables for PDEs. Prerequisite or corequisite: MATH 209 or 214. Notes: (1) Open only to students in Engineering and Specialization Geophysics. (2) Credit can be obtained in at most one of MATH 201, MATH 334, MATH 336, or MA PH 251. (3) Students in all sections of this course will write a common final examination. Non-Engineering students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D |
MEC E 230
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Introduction to modes of heat transfer. One dimensional heat conduction. Heat transfer from surfaces. Introduction to fluid mechanics. Fluid properties. Fluid statics. Use of control volumes. Internal flows. Prerequisites: MATH 101, EN PH 131.
Accreditation Units
Math and Natural Sciences: 11.0 Units
Engineering Science: 33.1 Units
Engineering Science and Engineering Design: 33.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I |
MEC E 260
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
Design morphology, analysis and design of components, mechanical design with electric motors, computer-aided design introduction, design project. Prerequisite: ENGG 160. Corequisite: MEC E 265 and CIV E 270.
Accreditation Units
Math and Natural Sciences: 22.1 Units
Engineering Design: 22.1 Units
Engineering Science and Engineering Design: 22.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | D | I | D | D | D | I | I | I | I | I | D |
MEC E 265
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
Engineering drawing and sketching, conventional drafting, computer-aided drawing in 2D and 3D, solid modelling, and computer-aided design.
Accreditation Units
Engineering Design: 11.0 Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | D | D | D | I | I | I | I | D |
Fall Term 5
MEC E 300N
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
(NOTE: This is MEC E 300 updated to add conepts need form STAT 235) Characterization and behavior of measuring systems. Statistics and analysis of measurement data; measurement techniques applied to fundamental mechanical engineering phenomena. Prerequisites: CIV E 270, ECE 209, STAT 235. Corequisite: MEC E 330 or MEC E 331.
Accreditation Units
Math and Natural Sciences: 13.2 Units
Engineering Science: 30.9 Units
Engineering Science and Engineering Design: 30.9 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | A | A | D | D |
MEC E 301
★ 2.5
(fi 6)(either term or Spring/Summer,
1-0-3)
Laboratory experiments in mechanical engineering measurement techniques, treatment of measurement data, introduction to engineering report writing. Corequisite: MEC E 300.
Accreditation Units
Engineering Science: 9.4 Units
Engineering Design: 12.6 Units
Engineering Science and Engineering Design: 22.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | I | D | D | D | D | D | D | D |
MEC E 331
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-1)
External flow, boundary layers, momentum theories, similitude, fluid metering, fluid friction, fluid friction in pipes, pipe networks. Prerequisites: MEC E 230, MEC E 250, MATH 209. Corequisite: MEC E 240 or CH E 243. Credit can only be granted for one of MEC E 330 or MEC E 331.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | D | I | D | D | D |
MEC E 371
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Mechanisms of heat transfer, steady and unsteady heat conduction, numerical analysis, thermal radiation, free and forced convection, heat exchanger analysis and heat transfer with change of phase and mass transfer. Prerequisites: MEC E 230; MEC E 240 or CH E 243. Corequisites: MEC E 331; and MEC E 395 or MATH 300.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | I | D | D | D |
MEC E 380
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Stress, strain, stress-strain relation, time-independent and time-dependent behavior, virtual work and energy theorems, deformations, indeterminate systems, matrix methods. Prerequisite: CIV E 270.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | D |
MEC E 395
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Formulation of initial and boundary value problems necessary to model physical scenarios in mechanical engineering, and understanding their effect on solution outcomes. Prerequisites: MATH 201, MATH 209, MEC E 230, MEC E 250, CIV E 270. Credit cannot be obtained for BOTH MATH 300 and MEC E 395.
Accreditation Units
Winter Term 6
ENG M 310/401
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
A choice ONE of a the following engineering managment courses, be aware of when courses are scheduled: Corequisites: ENG M 310, ENG M 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
MEC E 340
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-1)
Thermodynamic applications of gas, vapour, and combined power cycles. Heat pump and refrigeration cycles. Gas mixtures, real gases, and psychrometry. Chemical reactions. Prerequisite: MEC E 240 or CH E 243.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | D | D |
MEC E 360
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-1.5)
Design procedures, theories of failure, material selection, design for fatigue, creep and relaxation, selection of gears and bearings and application of computer-aided design software. Prerequisite: MEC E 260 and 265, MAT E 202 and CIV E 270. Corequisite: MEC E 362.
Accreditation Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | D | D | D | D | D | D |
MEC E 362
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-1.5)
Velocities and acceleration in plane mechanisms, balancing of rotating and reciprocating machinery, gears and gear trains. Prerequisite: MEC E 250.
Accreditation Units
Engineering Design: 14.2 Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | A | A | A |
MEC E 390
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-1)
Application of numerical methods to mechanical engineering problems; topics include sources and definitions of error, root finding, solutions of linear and non-linear systems of equations, regression, interpolaton, numerical integration and differentiation, solution of initial value and boundary value ordinary differential equations. Applications include dynamics, solid mechanics, heat transfer and fluid flow. Prerequisites: MATH 102 and 201.
Accreditation Units
Math and Natural Sciences: 29.4 Units
Engineering Science: 14.7 Units
Engineering Science and Engineering Design: 14.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | D | A |
COMP E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Complementary Studies Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D |
Fall Term 7
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
MEC E 460
★ 4.5
(fi 6)(first term,
2-1s-4)
Part 1 of the Capstone Design Project. Working in teams, students will undertake a feasibility study and detailed design of a project which requires students to exercise creative ability, to make assumptions and decisions based on synthesis of technical knowledge, and in general, devise new designs, rather than analyse existing ones, and test prototypes for performance and durability. Prerequisite: MEC E 360, Corequisite: ENG M 401.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | A | A | A | A | A | A |
ENGG 404
★ 3.8
(fi 6)(either term or Spring/Summer,
3-3s/2-0)
Basic concepts of risk and consequences of loss incidents; risk management principles and practices; incident investigation, causation, root cause analysis; process safety management; the roles of government agencies, professional bodies and industry associations; workplace safety; risk-based decision-making processes; leadership and the human-factors side of risk management. The course focuses on the principles and practices of leadership towards the effective application and implementation of risk management in major organizations across all engineering disciplines. Industry virtual tours, case studies, seminars and team projects specific to the student's engineering program will be used to develop competencies and proficiencies in applying leadership and organizational effectiveness for successful risk management.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | D | A | A | D | D |
MEC E 430/480
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
A choice between MEC E 430 or MEC E 480, be aware of when courses are scheduled Corequisites: MEC E 430, MEC E 480.
Accreditation Units
Engineering Science and Engineering Design: 37.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | A | A | A |
MEC E 46X
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-2)
A choice ONE of a the following design courses, be aware of when courses are scheduled: Corequisites: MEC E 409, MEC E 463, MEC E 464, MEC E 466.
Accreditation Units
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
Winter Term 8
MEC E 420
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-3/2)
Design of linear feedback control systems for command-following error, stability, and dynamic response specifications. PID, Root-locus, frequency response and design techniques. An introduction to structural design limitations. Examples emphasizing Mechanical Engineering systems. Some use of computer aided design with MATLAB/Simulink. Controls Lab - control of mechanical systems. Prerequisites: MEC E 390. Credit can only be granted for one of MEC E 420, ECE 362, CH E 448.
Accreditation Units
Engineering Design: 11.8 Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | D | A | D | D | D |
ENGG 400
★ 1.0
(fi 2)(either term,
1-0-0)
The technical and professional duties and responsibilities of the engineer; the ethics of the engineering profession; technical and professional organizations. The role of the engineer in the social environment including elements of equity, concepts of sustainable development and environmental stewardship, public and worker safety and health considerations including the context of the Alberta Occupational Health and Safety Act. Note: Restricted to fourth-year traditional and fifth-year co-op engineering students. Must be taken in last term of program.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | D | A | A |
MEC E 461
★ 4.5
(fi 6)(second term,
2-1s-4)
Part 2 of the Capstone Design Project. Working in teams, students will undertake a feasibility study and detailed design of a project which requires students to exercise creative ability, to make assumptions and decisions based on synthesis of technical knowledge, devise new designs, rather than analyse existing ones, and test prototypes for performance and durability. Prerequisite: MEC E 460.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | A | A | A | A | A | A |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
MEC E 403
★ 2.5
(fi 6)(either term or Spring/Summer,
1-0-3)
Selected laboratory experiments in applied mechanics and thermosciences. Prerequisites: MEC E 300, 301, 340 and 360.
Accreditation Units
Engineering Science: 23.6 Units
Engineering Science and Engineering Design: 23.6 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | A | D | A |
MEC E 451
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-2/2)
Free and forced vibration of single degree of freedom systems with and without damping, free and forced vibration of undamped multi-degree of freedom systems, vibration of continuous systems, introduction to engineering acoustics. Prerequisites: MEC E 250 and MATH 201.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | D | D | D | D |
ITS E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Impact of Technology on Society from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D |
| M: | 310.3 | / | 195 | ✅ |
| NS: | 207.8 | / | 195 | ✅ |
| CS: | 354.3 | / | 225 | ✅ |
| ES: | 972.4 | / | 225 | ✅ |
| ED: | 454.4 | / | 225 | ✅ |
| M+NS: | 518.1 | / | 420 | ✅ |
| ES+ED: | 1426.8 | / | 900 | ✅ |
| Total: | 2299.2 | / | 1850 | ✅ |
TOTAL
ENG M 310/401
ENG M 310
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
The application of the fundamentals of economics to engineering alternatives in planning, developing and managing industrial projects. Note: Credit cannot be obtained for more than one of ENGG 310, 401, ENG M 310 or 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
ENG M 401
★ 3.0
(fi 6)(either term,
3-0-0)
The application of the fundamentals of engineering economics, financial analysis and market assessment to engineering alternatives in the planning, development and ongoing management of industrial enterprises. The course covers the use of engineering, economic, financial and market assessment information in investment and business operation decisions in technology oriented companies. Note: Credit cannot be obtained for more than one of ENGG 310, ENGG 401, ENG M 310, or ENG M 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
MEC E 430/480
MEC E 430
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
The isentropic flow relations, variable area ducts, normal and oblique shocks, Prandtl-Meyer expansions, flow in ducts (Rayleigh, Fanno, isothermal), applications to engineering systems. Prerequisite: MEC E 331.
Accreditation Units
Engineering Science and Engineering Design: 37.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | A | A | A |
MEC E 480
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Special topics for beams, torsion, pressure vessels, plane stress and strain, stability, fracture mechanics. Prerequisites: MEC E 360; MEC E 380; MEC E 395 or MATH 300.
Accreditation Units
Engineering Science and Engineering Design: 37.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | D | D | A | A | A |
MEC E 46X
MEC E 409
★ 4.0
(fi 6)(either term or Spring/Summer,
2-0-4)
Selected group projects in experimental measurement and mechanical design. Two to four person groups develop planning, design, testing and report writing skills on projects in applied mechanics, thermosciences and engineering management. Prerequisites: MEC E 301 and ENG M 310 or 401.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | I | D | D | I |
MEC E 463
★ 4.0
(fi 6)(either term or Spring/Summer,
3-0-2)
Design and optimization of thermo-fluid systems, heating and ventilating equipment and load calculations, system design, piping networks, heat exchanger analysis and design, computer-aided design projects. Prerequisites: MEC E 330 or 331, 340, and 370 or 371.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | A | D | D | D | D | D | D |
MEC E 464
★ 4.0
(fi 2)(either term or Spring/Summer,
1-2s-4)
Design of machine components for ease of manufacture. Application of measurement, inspection, and reverse engineering techniques. Preparation of working drawings for manufacturing. Introduction to machining operations, including hands-on machine shop practice. Evaluation of design performance. Sections offered at an increased rate of fee assessment; refer to the Tuition and Fees page in the University Regulations sections of the Calendar. Prerequisites: MEC E 260, 265, 300, and 301.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | A | A | D | D |
MEC E 466
★ 4.0
(fi 6)(either term or Spring/Summer,
3-0-2)
Design and analysis of building systems for maintaining the indoor environment. Design of heating, ventilation and air conditioning systems through load calculations, equipment selection and specification. Prerequisites: MEC E 340, 370 or 371.
Accreditation Units
Engineering Design: 25.2 Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | D | D |
Term 1
CHEM 103
★ 4.3
(fi 6)(either term,
3-1s-3/2)
Atoms and molecules, states of matter, chemistry of the elements. Prerequisite: Chemistry 30, or equivalent. Note: Restricted to Engineering students only. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 53.5 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
ENGG 110
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-2)
Introduction to engineering as a profession. At the core of engineering is design, communication, and professionalism in a multidisciplinary context. This course focuses on foundational design processes, teamwork, and communication skills for engineering practice, including written, oral, and visual communication with diverse audiences. Topics include organizing and structuring information, fundamental writing skills, engineering document types, targeting the audience, presentation strategies, and the professional responsibilities of engineers, including ethics, equity, and public and worker health and safety.
Accreditation Units
Engineering Design: 12.6 Units
Engineering Science and Engineering Design: 12.6 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I | I | I | I | I |
ENGG 151
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-3/2)
Application of calculus and linear algebra to modelling of engineering systems with an emphasis on mechanics. Equilibrium analysis of rigid bodies and structures. Calculation of forces and moments. Use of vectors and matrix equations to represent and solve systems of interacting components. Corequisite: ENGG 150.
Accreditation Units
Natural Sciences: 16.1 Units
Math and Natural Sciences: 32.1 Units
Engineering Science: 21.4 Units
Engineering Science and Engineering Design: 21.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I |
ENGG 153
★ 3.0
(fi 6)(Fall or Winter,
3-1s-2)
An applied introduction to engineering computation. Topics may include data handling, analysis, and visualization; algorithmic problem-solving and programming; and the use of artificial intelligence tools for developing computational solutions. Emphasis is placed on testing and verification, interpretation and communication of results, and the responsible use of computational tools in engineering practice.
Accreditation Units
Math and Natural Sciences: 5.7 Units
Complimentary Studies: 5.7 Units
Engineering Science: 45.4 Units
Engineering Science and Engineering Design: 45.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I | I | I | I | I |
ENGG 150
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-3/2)
Application of calculus to modelling of engineering systems with an emphasis on mechanics. Kinematics and dynamics of particles and rigid bodies. Newton’s laws of motion in linear and rotational systems. Use of differentiation and integration as tools for modelling relationships between engineering variables. Corequisite: ENGG 151.
Accreditation Units
Natural Sciences: 17.7 Units
Math and Natural Sciences: 44.4 Units
Engineering Science: 9.1 Units
Engineering Science and Engineering Design: 9.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I |
Term 2
PHYS 130
★ 3.8
(fi 6)(either term,
3-0-3/2)
Geometrical optics, optical instruments, oscillations, waves, sound, interference, diffraction. Prerequisites: Mathematics 30-1, Mathematics 31, Physics 30. Corequisite: MATH 100 or 113 or 114 or 117 or 134 or 144 or equivalent. Restricted to Engineering students. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
ENGG 111
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-2)
A continuation of engineering design, communication, and the profession with emphasis on applying design, communication, and collaboration skills in varied engineering contexts, including in teams, with diverse interest holders, engagement with clients, communities, and the use of communication and presentation technologies in engineering work. Topics also include written and visual communication of data and results, the engineering code of ethics, equity, legal and professional responsibilities, and broader obligations related to the impact of engineering on society, such as sustainable development, environmental stewardship, and public safety and welfare. Prerequisite: ENGG 110.
Accreditation Units
Engineering Design: 50.4 Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I | I | I | I | I |
ENGG 155
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Introduction to modelling, analysis, and simulation of lumped-parameter, time-dependent engineering systems. Topics include first- and second-order ordinary differential equation models; RC, RL, and RLC circuits; mechanical oscillators; damping, resonance, forced response, complex-number representations, Fourier series, Laplace transforms, transfer functions, frequency response, and introductory feedback. Prerequisites: ENGG 150 and ENGG 151. Corequisite: ENGG 156.
Accreditation Units
Natural Sciences: 5.4 Units
Math and Natural Sciences: 26.8 Units
Complimentary Studies: 2.7 Units
Engineering Science: 24.1 Units
Engineering Science and Engineering Design: 24.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I |
ENGG 156
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Modelling of lumped and distributed engineering systems using ordinary and elementary partial differential equations. Multidisciplinary applications may include dynamical systems, open-channel flow, beam deflection, and steady and unsteady heat conduction. Topics will be explored using various mathematical methods, including those based on eigenvalue, phase plane, and similarity analysis. Prerequisites: ENGG 150 and ENGG 151. Corequisite: ENGG 155.
Accreditation Units
Natural Sciences: 8.0 Units
Math and Natural Sciences: 29.5 Units
Complimentary Studies: 1.3 Units
Engineering Science: 22.8 Units
Engineering Science and Engineering Design: 22.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I |
Comp. Elec.
A complementary elective of the student's choice. Please consult the calendar for more information.
Term 3
ENGG 250
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Modelling of three-dimensional engineering systems and processes using multivariable mathematics and vector calculus. Engineering applications may include heat and mass transport, fluid flow, electromagnetics, and thermodynamics. Techniques include differentiation and integration in multiple dimensions, polar and spherical coordinates, vector calculus fundamentals, gradient, divergence, curl, and curves and surfaces. Prerequisite: ENGG 155, ENGG 156; co-requisite ENGG 250, ENGG 251.
Accreditation Units
Natural Sciences: 8.0 Units
Math and Natural Sciences: 34.8 Units
Engineering Science: 18.7 Units
Engineering Science and Engineering Design: 18.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I | I |
ENGG 251
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Modelling of spatially distributed engineering systems using partial differential equations. Engineering applications may include structural vibrations, stress propagation, heat and mass transport, electromagnetic fields, and steady-state spatially distributed systems. Topics include formulation of well-posed boundary-value and initial-boundary-value PDE problems, analytical solution by separation of variables, interpretation of solutions and extraction of quantitative engineering metrics, and links to numerical simulation methods Prerequisite: ENGG 155, ENGG 156; co-requisite ENGG 250, ENGG 255.
Accreditation Units
Natural Sciences: 7.5 Units
Math and Natural Sciences: 30.5 Units
Engineering Science: 23.0 Units
Engineering Science and Engineering Design: 23.0 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | I | D | D | D | D |
ENGG 255
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-2)
Sources and definitions of error, convergence and stability, root finding, solution of linear and nonlinear systems of equations, regression and curve fitting, numerical differentiation, numerical integration, numerical solution of initial value and boundary value ordinary differential equations, numerical approaches to partial differential equations and discretization, finite difference methods, introductory meshing concepts, stability considerations, and introductory finite element method workflow. Engineering applications are drawn from multiple disciplines. Corequisites: ENGG 250, ENGG 251.
Accreditation Units
Natural Sciences: 2.8 Units
Math and Natural Sciences: 28.3 Units
Engineering Science: 28.3 Units
Engineering Science and Engineering Design: 28.3 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | A | D | D |
MEC E 230
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Introduction to modes of heat transfer. One dimensional heat conduction. Heat transfer from surfaces. Introduction to fluid mechanics. Fluid properties. Fluid statics. Use of control volumes. Internal flows. Prerequisites: MATH 101, EN PH 131.
Accreditation Units
Math and Natural Sciences: 11.0 Units
Engineering Science: 33.1 Units
Engineering Science and Engineering Design: 33.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I |
MEC E 250
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Moments of inertia. Kinematics and kinetics of rigid body motion, energy and momentum methods, impact, mechanical vibrations. Prerequisites: ENGG 130, EN PH 131 and MATH 101. There is a consolidated exam.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I |
Term 4
ECE 209
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-3/2)
Physical concepts of passive circuit elements, Kirchhoff's laws and DC circuit equations. Energy concepts, time domain analysis of AC circuits. Impedance, complex numbers and phasor algebra. AC power concepts, resonance, three phase circuits, introduction to machines. Credit may be obtained in only one of ECE 209, E E 239, ECE 202, or E E 240, unless approved by the Department.
Accreditation Units
Engineering Design: 11.8 Units
Engineering Science and Engineering Design: 47.2 Units
MAT E 202
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1.5s/2-)
An introduction to the science of materials relating their mechanical, thermal, electronic, and chemical properties to atomic, molecular, and crystal structure. Ceramic and metallic crystals, glasses, polymers, and composite materials. Multi-phase materials, phase transformations, and strengthening processes. Laboratories and seminars include mechanical properties of materials, microstructure, heat treatment of steel, and hands on design experiments. Prerequisite: CHEM 105 or consent of Department.
Accreditation Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | D | I | I | I |
MATH 201
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-1)
First-order equations; second-order linear equations: reduction of order, variation of parameters; Laplace transform; linear systems; power series; solution by series; separation of variables for PDEs. Prerequisite or corequisite: MATH 209 or 214. Notes: (1) Open only to students in Engineering and Specialization Geophysics. (2) Credit can be obtained in at most one of MATH 201, MATH 334, MATH 336, or MA PH 251. (3) Students in all sections of this course will write a common final examination. Non-Engineering students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D |
MEC E 230
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Introduction to modes of heat transfer. One dimensional heat conduction. Heat transfer from surfaces. Introduction to fluid mechanics. Fluid properties. Fluid statics. Use of control volumes. Internal flows. Prerequisites: MATH 101, EN PH 131.
Accreditation Units
Math and Natural Sciences: 11.0 Units
Engineering Science: 33.1 Units
Engineering Science and Engineering Design: 33.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I |
MEC E 260
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
Design morphology, analysis and design of components, mechanical design with electric motors, computer-aided design introduction, design project. Prerequisite: ENGG 160. Corequisite: MEC E 265 and CIV E 270.
Accreditation Units
Math and Natural Sciences: 22.1 Units
Engineering Design: 22.1 Units
Engineering Science and Engineering Design: 22.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | D | I | D | D | D | I | I | I | I | I | D |
MEC E 265
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
Engineering drawing and sketching, conventional drafting, computer-aided drawing in 2D and 3D, solid modelling, and computer-aided design.
Accreditation Units
Engineering Design: 11.0 Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | D | D | D | I | I | I | I | D |
STAT 235
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-1.5)
Descriptive data analysis. Calculus of Probability. Binomial, multinomial, Poisson, normal, beta, exponential, gamma, hypergeometric, and Weibull distributions. Sampling distributions. Estimation, testing hypotheses, goodness-of-fit tests, and one-way analysis of variance. Linear correlation and regression. Sampling. Quality control. Use of a microcomputer software package for statistical analyses in engineering applications. Prerequisite: MATH 100. Corequisite: MATH 101. Notes: (1) This course may not be taken for credit if credit has already been obtained in one of STAT 151, 161, 222, 265, 266, 276, 281; KIN 109, PEDS 109, PSYCH 211, PTHER 352, SCI 151 or SOC 320. (2) Intended for Engineering students. (2) Intended for Engineering students. Other students who take this course will receive 3.0 units.
Accreditation Units
Math and Natural Sciences: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I |
Term 5
MEC E 300N
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
(NOTE: This is MEC E 300 updated to add conepts need form STAT 235) Characterization and behavior of measuring systems. Statistics and analysis of measurement data; measurement techniques applied to fundamental mechanical engineering phenomena. Prerequisites: CIV E 270, ECE 209, STAT 235. Corequisite: MEC E 330 or MEC E 331.
Accreditation Units
Math and Natural Sciences: 13.2 Units
Engineering Science: 30.9 Units
Engineering Science and Engineering Design: 30.9 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | A | A | D | D |
MEC E 301
★ 2.5
(fi 6)(either term or Spring/Summer,
1-0-3)
Laboratory experiments in mechanical engineering measurement techniques, treatment of measurement data, introduction to engineering report writing. Corequisite: MEC E 300.
Accreditation Units
Engineering Science: 9.4 Units
Engineering Design: 12.6 Units
Engineering Science and Engineering Design: 22.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | I | D | D | D | D | D | D | D |
MEC E 331
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-1)
External flow, boundary layers, momentum theories, similitude, fluid metering, fluid friction, fluid friction in pipes, pipe networks. Prerequisites: MEC E 230, MEC E 250, MATH 209. Corequisite: MEC E 240 or CH E 243. Credit can only be granted for one of MEC E 330 or MEC E 331.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | D | I | D | D | D |
MEC E 371
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Mechanisms of heat transfer, steady and unsteady heat conduction, numerical analysis, thermal radiation, free and forced convection, heat exchanger analysis and heat transfer with change of phase and mass transfer. Prerequisites: MEC E 230; MEC E 240 or CH E 243. Corequisites: MEC E 331; and MEC E 395 or MATH 300.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | I | D | D | D |
MEC E 380
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Stress, strain, stress-strain relation, time-independent and time-dependent behavior, virtual work and energy theorems, deformations, indeterminate systems, matrix methods. Prerequisite: CIV E 270.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | D |
MEC E 395
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Formulation of initial and boundary value problems necessary to model physical scenarios in mechanical engineering, and understanding their effect on solution outcomes. Prerequisites: MATH 201, MATH 209, MEC E 230, MEC E 250, CIV E 270. Credit cannot be obtained for BOTH MATH 300 and MEC E 395.
Accreditation Units
Term 6
ENG M 310/401
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
A choice ONE of a the following engineering managment courses, be aware of when courses are scheduled: Corequisites: ENG M 310, ENG M 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
MEC E 340
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-1)
Thermodynamic applications of gas, vapour, and combined power cycles. Heat pump and refrigeration cycles. Gas mixtures, real gases, and psychrometry. Chemical reactions. Prerequisite: MEC E 240 or CH E 243.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | D | D |
MEC E 360
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-1.5)
Design procedures, theories of failure, material selection, design for fatigue, creep and relaxation, selection of gears and bearings and application of computer-aided design software. Prerequisite: MEC E 260 and 265, MAT E 202 and CIV E 270. Corequisite: MEC E 362.
Accreditation Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | D | D | D | D | D | D |
MEC E 362
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-1.5)
Velocities and acceleration in plane mechanisms, balancing of rotating and reciprocating machinery, gears and gear trains. Prerequisite: MEC E 250.
Accreditation Units
Engineering Design: 14.2 Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | A | A | A |
Tech. Elec.
A program/technical elective of the student's choice. Please consult the calendar for more information.
COMP E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Complementary Studies Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D |
Term 7
MEC E 4SM
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-3)
A choice ONE of a the following design courses, be aware of when courses are scheduled: Corequisites: MEC E 467, MEC E 468, MEC E 539, MEC E 563.
Accreditation Units
Engineering Design: 17.0 Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | A |
MEC E 460
★ 4.5
(fi 6)(first term,
2-1s-4)
Part 1 of the Capstone Design Project. Working in teams, students will undertake a feasibility study and detailed design of a project which requires students to exercise creative ability, to make assumptions and decisions based on synthesis of technical knowledge, and in general, devise new designs, rather than analyse existing ones, and test prototypes for performance and durability. Prerequisite: MEC E 360, Corequisite: ENG M 401.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | A | A | A | A | A | A |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
MEC E 430/480
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
A choice between MEC E 430 or MEC E 480, be aware of when courses are scheduled Corequisites: MEC E 430, MEC E 480.
Accreditation Units
Engineering Science and Engineering Design: 37.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | A | A | A |
MEC E 46X
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-2)
A choice ONE of a the following design courses, be aware of when courses are scheduled: Corequisites: MEC E 409, MEC E 463, MEC E 464, MEC E 466.
Accreditation Units
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
Term 8
MEC E 420
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-3/2)
Design of linear feedback control systems for command-following error, stability, and dynamic response specifications. PID, Root-locus, frequency response and design techniques. An introduction to structural design limitations. Examples emphasizing Mechanical Engineering systems. Some use of computer aided design with MATLAB/Simulink. Controls Lab - control of mechanical systems. Prerequisites: MEC E 390. Credit can only be granted for one of MEC E 420, ECE 362, CH E 448.
Accreditation Units
Engineering Design: 11.8 Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | D | A | D | D | D |
ENGG 400
★ 1.0
(fi 2)(either term,
1-0-0)
The technical and professional duties and responsibilities of the engineer; the ethics of the engineering profession; technical and professional organizations. The role of the engineer in the social environment including elements of equity, concepts of sustainable development and environmental stewardship, public and worker safety and health considerations including the context of the Alberta Occupational Health and Safety Act. Note: Restricted to fourth-year traditional and fifth-year co-op engineering students. Must be taken in last term of program.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | D | A | A |
MEC E 461
★ 4.5
(fi 6)(second term,
2-1s-4)
Part 2 of the Capstone Design Project. Working in teams, students will undertake a feasibility study and detailed design of a project which requires students to exercise creative ability, to make assumptions and decisions based on synthesis of technical knowledge, devise new designs, rather than analyse existing ones, and test prototypes for performance and durability. Prerequisite: MEC E 460.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | A | A | A | A | A | A |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
MEC E 403
★ 2.5
(fi 6)(either term or Spring/Summer,
1-0-3)
Selected laboratory experiments in applied mechanics and thermosciences. Prerequisites: MEC E 300, 301, 340 and 360.
Accreditation Units
Engineering Science: 23.6 Units
Engineering Science and Engineering Design: 23.6 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | A | D | A |
MEC E 451
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-2/2)
Free and forced vibration of single degree of freedom systems with and without damping, free and forced vibration of undamped multi-degree of freedom systems, vibration of continuous systems, introduction to engineering acoustics. Prerequisites: MEC E 250 and MATH 201.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | D | D | D | D |
ITS E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Impact of Technology on Society from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D |
| M: | 271.2 | / | 195 | ✅ |
| NS: | 210.3 | / | 195 | ✅ |
| CS: | 291.6 | / | 225 | ✅ |
| ES: | 1273.2 | / | 225 | ✅ |
| ED: | 517.5 | / | 225 | ✅ |
| M+NS: | 481.5 | / | 420 | ✅ |
| ES+ED: | 1790.7 | / | 900 | ✅ |
| Total: | 2563.8 | / | 1850 | ✅ |
TOTAL
ENG M 310/401
ENG M 310
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
The application of the fundamentals of economics to engineering alternatives in planning, developing and managing industrial projects. Note: Credit cannot be obtained for more than one of ENGG 310, 401, ENG M 310 or 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
ENG M 401
★ 3.0
(fi 6)(either term,
3-0-0)
The application of the fundamentals of engineering economics, financial analysis and market assessment to engineering alternatives in the planning, development and ongoing management of industrial enterprises. The course covers the use of engineering, economic, financial and market assessment information in investment and business operation decisions in technology oriented companies. Note: Credit cannot be obtained for more than one of ENGG 310, ENGG 401, ENG M 310, or ENG M 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
MEC E 430/480
MEC E 430
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
The isentropic flow relations, variable area ducts, normal and oblique shocks, Prandtl-Meyer expansions, flow in ducts (Rayleigh, Fanno, isothermal), applications to engineering systems. Prerequisite: MEC E 331.
Accreditation Units
Engineering Science and Engineering Design: 37.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | A | A | A |
MEC E 480
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Special topics for beams, torsion, pressure vessels, plane stress and strain, stability, fracture mechanics. Prerequisites: MEC E 360; MEC E 380; MEC E 395 or MATH 300.
Accreditation Units
Engineering Science and Engineering Design: 37.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | D | D | A | A | A |
MEC E 46X
MEC E 409
★ 4.0
(fi 6)(either term or Spring/Summer,
2-0-4)
Selected group projects in experimental measurement and mechanical design. Two to four person groups develop planning, design, testing and report writing skills on projects in applied mechanics, thermosciences and engineering management. Prerequisites: MEC E 301 and ENG M 310 or 401.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | I | D | D | I |
MEC E 463
★ 4.0
(fi 6)(either term or Spring/Summer,
3-0-2)
Design and optimization of thermo-fluid systems, heating and ventilating equipment and load calculations, system design, piping networks, heat exchanger analysis and design, computer-aided design projects. Prerequisites: MEC E 330 or 331, 340, and 370 or 371.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | A | D | D | D | D | D | D |
MEC E 464
★ 4.0
(fi 2)(either term or Spring/Summer,
1-2s-4)
Design of machine components for ease of manufacture. Application of measurement, inspection, and reverse engineering techniques. Preparation of working drawings for manufacturing. Introduction to machining operations, including hands-on machine shop practice. Evaluation of design performance. Sections offered at an increased rate of fee assessment; refer to the Tuition and Fees page in the University Regulations sections of the Calendar. Prerequisites: MEC E 260, 265, 300, and 301.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | A | A | D | D |
MEC E 466
★ 4.0
(fi 6)(either term or Spring/Summer,
3-0-2)
Design and analysis of building systems for maintaining the indoor environment. Design of heating, ventilation and air conditioning systems through load calculations, equipment selection and specification. Prerequisites: MEC E 340, 370 or 371.
Accreditation Units
Engineering Design: 25.2 Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | D | D |
MEC E 4SM
MEC E 467
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Modeling and analysis of systems and processes that include technological decision making. Formulation and solution methods for systems including associated resource requirements and other system inputs. Numerical methods for simulation. Projects will involve simulation software to support analysis and design of engineering systems and processes. Prerequisites: MEC E 250 and 390. Note that credit cannot be obtained in both MEC E 467 and ENG M 541.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | D | A |
MEC E 468
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Computer modelling in mechanical engineering. Simulation of mechanisms. Stress analysis and heat transfer using commercial software. Emphasis is on numerical model design including testing and verification methods, and the critical interpretation of the computed results. Credit cannot be obtained in both MEC E 468 and 568. Prerequisites: MEC E 265, 362, 370 or 371, 380, 390.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
MEC E 539
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Model selection and simplification, grid generation and grid independence, transient and advection terms treatment, turbulence modeling, verification and validation, best practices. Hands-on experience with commercial CFD codes to demonstrate the application of: theory, proper setup and analysis. Prerequisites: MEC E 390, and 331 or equivalent.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A |
MEC E 563
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Application of finite element methods to mechanical engineering problems; topics include direct stiffness methods, assembly, constraints, solution techniques, post-processing, element types and the Galkerin procedure. Applications include beam truss and frame analysis, plane strain and stress problems, heat transfer and dynamic analysis Prerequisites: MATH 300, MEC E 360, 390.
Accreditation Units
Engineering Design: 17.0 Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | A |
Term 1
CHEM 103
★ 4.3
(fi 6)(either term,
3-1s-3/2)
Atoms and molecules, states of matter, chemistry of the elements. Prerequisite: Chemistry 30, or equivalent. Note: Restricted to Engineering students only. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 53.5 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
ENGG 110
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-2)
Introduction to engineering as a profession. At the core of engineering is design, communication, and professionalism in a multidisciplinary context. This course focuses on foundational design processes, teamwork, and communication skills for engineering practice, including written, oral, and visual communication with diverse audiences. Topics include organizing and structuring information, fundamental writing skills, engineering document types, targeting the audience, presentation strategies, and the professional responsibilities of engineers, including ethics, equity, and public and worker health and safety.
Accreditation Units
Engineering Design: 12.6 Units
Engineering Science and Engineering Design: 12.6 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I | I | I | I | I |
ENGG 151
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-3/2)
Application of calculus and linear algebra to modelling of engineering systems with an emphasis on mechanics. Equilibrium analysis of rigid bodies and structures. Calculation of forces and moments. Use of vectors and matrix equations to represent and solve systems of interacting components. Corequisite: ENGG 150.
Accreditation Units
Natural Sciences: 16.1 Units
Math and Natural Sciences: 32.1 Units
Engineering Science: 21.4 Units
Engineering Science and Engineering Design: 21.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I |
ENGG 153
★ 3.0
(fi 6)(Fall or Winter,
3-1s-2)
An applied introduction to engineering computation. Topics may include data handling, analysis, and visualization; algorithmic problem-solving and programming; and the use of artificial intelligence tools for developing computational solutions. Emphasis is placed on testing and verification, interpretation and communication of results, and the responsible use of computational tools in engineering practice.
Accreditation Units
Math and Natural Sciences: 5.7 Units
Complimentary Studies: 5.7 Units
Engineering Science: 45.4 Units
Engineering Science and Engineering Design: 45.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I | I | I | I | I |
ENGG 150
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-3/2)
Application of calculus to modelling of engineering systems with an emphasis on mechanics. Kinematics and dynamics of particles and rigid bodies. Newton’s laws of motion in linear and rotational systems. Use of differentiation and integration as tools for modelling relationships between engineering variables. Corequisite: ENGG 151.
Accreditation Units
Natural Sciences: 17.7 Units
Math and Natural Sciences: 44.4 Units
Engineering Science: 9.1 Units
Engineering Science and Engineering Design: 9.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I |
Term 2
PHYS 130
★ 3.8
(fi 6)(either term,
3-0-3/2)
Geometrical optics, optical instruments, oscillations, waves, sound, interference, diffraction. Prerequisites: Mathematics 30-1, Mathematics 31, Physics 30. Corequisite: MATH 100 or 113 or 114 or 117 or 134 or 144 or equivalent. Restricted to Engineering students. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
ENGG 111
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-2)
A continuation of engineering design, communication, and the profession with emphasis on applying design, communication, and collaboration skills in varied engineering contexts, including in teams, with diverse interest holders, engagement with clients, communities, and the use of communication and presentation technologies in engineering work. Topics also include written and visual communication of data and results, the engineering code of ethics, equity, legal and professional responsibilities, and broader obligations related to the impact of engineering on society, such as sustainable development, environmental stewardship, and public safety and welfare. Prerequisite: ENGG 110.
Accreditation Units
Engineering Design: 50.4 Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I | I | I | I | I |
ENGG 155
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Introduction to modelling, analysis, and simulation of lumped-parameter, time-dependent engineering systems. Topics include first- and second-order ordinary differential equation models; RC, RL, and RLC circuits; mechanical oscillators; damping, resonance, forced response, complex-number representations, Fourier series, Laplace transforms, transfer functions, frequency response, and introductory feedback. Prerequisites: ENGG 150 and ENGG 151. Corequisite: ENGG 156.
Accreditation Units
Natural Sciences: 5.4 Units
Math and Natural Sciences: 26.8 Units
Complimentary Studies: 2.7 Units
Engineering Science: 24.1 Units
Engineering Science and Engineering Design: 24.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I |
ENGG 156
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Modelling of lumped and distributed engineering systems using ordinary and elementary partial differential equations. Multidisciplinary applications may include dynamical systems, open-channel flow, beam deflection, and steady and unsteady heat conduction. Topics will be explored using various mathematical methods, including those based on eigenvalue, phase plane, and similarity analysis. Prerequisites: ENGG 150 and ENGG 151. Corequisite: ENGG 155.
Accreditation Units
Natural Sciences: 8.0 Units
Math and Natural Sciences: 29.5 Units
Complimentary Studies: 1.3 Units
Engineering Science: 22.8 Units
Engineering Science and Engineering Design: 22.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I |
COMP E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Complementary Studies Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D |
Term 3
ENGG 250
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Modelling of three-dimensional engineering systems and processes using multivariable mathematics and vector calculus. Engineering applications may include heat and mass transport, fluid flow, electromagnetics, and thermodynamics. Techniques include differentiation and integration in multiple dimensions, polar and spherical coordinates, vector calculus fundamentals, gradient, divergence, curl, and curves and surfaces. Prerequisite: ENGG 155, ENGG 156; co-requisite ENGG 250, ENGG 251.
Accreditation Units
Natural Sciences: 8.0 Units
Math and Natural Sciences: 34.8 Units
Engineering Science: 18.7 Units
Engineering Science and Engineering Design: 18.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I | I |
ENGG 251
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Modelling of spatially distributed engineering systems using partial differential equations. Engineering applications may include structural vibrations, stress propagation, heat and mass transport, electromagnetic fields, and steady-state spatially distributed systems. Topics include formulation of well-posed boundary-value and initial-boundary-value PDE problems, analytical solution by separation of variables, interpretation of solutions and extraction of quantitative engineering metrics, and links to numerical simulation methods Prerequisite: ENGG 155, ENGG 156; co-requisite ENGG 250, ENGG 255.
Accreditation Units
Natural Sciences: 7.5 Units
Math and Natural Sciences: 30.5 Units
Engineering Science: 23.0 Units
Engineering Science and Engineering Design: 23.0 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | I | D | D | D | D |
ENGG 255
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-2)
Sources and definitions of error, convergence and stability, root finding, solution of linear and nonlinear systems of equations, regression and curve fitting, numerical differentiation, numerical integration, numerical solution of initial value and boundary value ordinary differential equations, numerical approaches to partial differential equations and discretization, finite difference methods, introductory meshing concepts, stability considerations, and introductory finite element method workflow. Engineering applications are drawn from multiple disciplines. Corequisites: ENGG 250, ENGG 251.
Accreditation Units
Natural Sciences: 2.8 Units
Math and Natural Sciences: 28.3 Units
Engineering Science: 28.3 Units
Engineering Science and Engineering Design: 28.3 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | A | D | D |
MEC E 230
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Introduction to modes of heat transfer. One dimensional heat conduction. Heat transfer from surfaces. Introduction to fluid mechanics. Fluid properties. Fluid statics. Use of control volumes. Internal flows. Prerequisites: MATH 101, EN PH 131.
Accreditation Units
Math and Natural Sciences: 11.0 Units
Engineering Science: 33.1 Units
Engineering Science and Engineering Design: 33.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I |
MEC E 250
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Moments of inertia. Kinematics and kinetics of rigid body motion, energy and momentum methods, impact, mechanical vibrations. Prerequisites: ENGG 130, EN PH 131 and MATH 101. There is a consolidated exam.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I |
Term 4
MATH 201
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-1)
First-order equations; second-order linear equations: reduction of order, variation of parameters; Laplace transform; linear systems; power series; solution by series; separation of variables for PDEs. Prerequisite or corequisite: MATH 209 or 214. Notes: (1) Open only to students in Engineering and Specialization Geophysics. (2) Credit can be obtained in at most one of MATH 201, MATH 334, MATH 336, or MA PH 251. (3) Students in all sections of this course will write a common final examination. Non-Engineering students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D |
ENG M 310/401
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
A choice ONE of a the following engineering managment courses, be aware of when courses are scheduled: Corequisites: ENG M 310, ENG M 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
MEC E 260
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
Design morphology, analysis and design of components, mechanical design with electric motors, computer-aided design introduction, design project. Prerequisite: ENGG 160. Corequisite: MEC E 265 and CIV E 270.
Accreditation Units
Math and Natural Sciences: 22.1 Units
Engineering Design: 22.1 Units
Engineering Science and Engineering Design: 22.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | D | I | D | D | D | I | I | I | I | I | D |
MEC E 265
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
Engineering drawing and sketching, conventional drafting, computer-aided drawing in 2D and 3D, solid modelling, and computer-aided design.
Accreditation Units
Engineering Design: 11.0 Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | D | D | D | I | I | I | I | D |
MEC E 300N
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
(NOTE: This is MEC E 300 updated to add conepts need form STAT 235) Characterization and behavior of measuring systems. Statistics and analysis of measurement data; measurement techniques applied to fundamental mechanical engineering phenomena. Prerequisites: CIV E 270, ECE 209, STAT 235. Corequisite: MEC E 330 or MEC E 331.
Accreditation Units
Math and Natural Sciences: 13.2 Units
Engineering Science: 30.9 Units
Engineering Science and Engineering Design: 30.9 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | A | A | D | D |
Term 5
MEC E 301
★ 2.5
(fi 6)(either term or Spring/Summer,
1-0-3)
Laboratory experiments in mechanical engineering measurement techniques, treatment of measurement data, introduction to engineering report writing. Corequisite: MEC E 300.
Accreditation Units
Engineering Science: 9.4 Units
Engineering Design: 12.6 Units
Engineering Science and Engineering Design: 22.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | I | D | D | D | D | D | D | D |
MEC E 331
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-1)
External flow, boundary layers, momentum theories, similitude, fluid metering, fluid friction, fluid friction in pipes, pipe networks. Prerequisites: MEC E 230, MEC E 250, MATH 209. Corequisite: MEC E 240 or CH E 243. Credit can only be granted for one of MEC E 330 or MEC E 331.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | D | I | D | D | D |
MEC E 371
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Mechanisms of heat transfer, steady and unsteady heat conduction, numerical analysis, thermal radiation, free and forced convection, heat exchanger analysis and heat transfer with change of phase and mass transfer. Prerequisites: MEC E 230; MEC E 240 or CH E 243. Corequisites: MEC E 331; and MEC E 395 or MATH 300.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | I | D | D | D |
MEC E 380
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Stress, strain, stress-strain relation, time-independent and time-dependent behavior, virtual work and energy theorems, deformations, indeterminate systems, matrix methods. Prerequisite: CIV E 270.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | D |
MEC E 395
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Formulation of initial and boundary value problems necessary to model physical scenarios in mechanical engineering, and understanding their effect on solution outcomes. Prerequisites: MATH 201, MATH 209, MEC E 230, MEC E 250, CIV E 270. Credit cannot be obtained for BOTH MATH 300 and MEC E 395.
Accreditation Units
MEC E 364*
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
(NOTE: a combination of MEC E 364 and any missing elements from MAT E 202) Primary manufacturing processes, including casting, forming, machining, additive manufacturing, powder metallurgy and surface technology. Interactions between design, materials and processes, and laboratory activities. May require payment of additional student instructional support fees. Refer to the Tuition and Fees page in the University Regulations section of the Calendar.
Accreditation Units
Term 6
MEC E 340
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-1)
Thermodynamic applications of gas, vapour, and combined power cycles. Heat pump and refrigeration cycles. Gas mixtures, real gases, and psychrometry. Chemical reactions. Prerequisite: MEC E 240 or CH E 243.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | D | D |
MEC E 360
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-1.5)
Design procedures, theories of failure, material selection, design for fatigue, creep and relaxation, selection of gears and bearings and application of computer-aided design software. Prerequisite: MEC E 260 and 265, MAT E 202 and CIV E 270. Corequisite: MEC E 362.
Accreditation Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | D | D | D | D | D | D |
MEC E 362
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-1.5)
Velocities and acceleration in plane mechanisms, balancing of rotating and reciprocating machinery, gears and gear trains. Prerequisite: MEC E 250.
Accreditation Units
Engineering Design: 14.2 Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | A | A | A |
MEC E 451
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-2/2)
Free and forced vibration of single degree of freedom systems with and without damping, free and forced vibration of undamped multi-degree of freedom systems, vibration of continuous systems, introduction to engineering acoustics. Prerequisites: MEC E 250 and MATH 201.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | D | D | D | D |
MEC E 420
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-3/2)
Design of linear feedback control systems for command-following error, stability, and dynamic response specifications. PID, Root-locus, frequency response and design techniques. An introduction to structural design limitations. Examples emphasizing Mechanical Engineering systems. Some use of computer aided design with MATLAB/Simulink. Controls Lab - control of mechanical systems. Prerequisites: MEC E 390. Credit can only be granted for one of MEC E 420, ECE 362, CH E 448.
Accreditation Units
Engineering Design: 11.8 Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | D | A | D | D | D |
ITS E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Impact of Technology on Society from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D |
Term 7
MEC E 4SM
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-3)
A choice ONE of a the following design courses, be aware of when courses are scheduled: Corequisites: MEC E 467, MEC E 468, MEC E 539, MEC E 563.
Accreditation Units
Engineering Design: 17.0 Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | A |
MEC E 460
★ 4.5
(fi 6)(first term,
2-1s-4)
Part 1 of the Capstone Design Project. Working in teams, students will undertake a feasibility study and detailed design of a project which requires students to exercise creative ability, to make assumptions and decisions based on synthesis of technical knowledge, and in general, devise new designs, rather than analyse existing ones, and test prototypes for performance and durability. Prerequisite: MEC E 360, Corequisite: ENG M 401.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | A | A | A | A | A | A |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
MEC E 430/480
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
A choice between MEC E 430 or MEC E 480, be aware of when courses are scheduled Corequisites: MEC E 430, MEC E 480.
Accreditation Units
Engineering Science and Engineering Design: 37.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | A | A | A |
MEC E 46X
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-2)
A choice ONE of a the following design courses, be aware of when courses are scheduled: Corequisites: MEC E 409, MEC E 463, MEC E 464, MEC E 466.
Accreditation Units
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
Term 8
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
ENGG 400
★ 1.0
(fi 2)(either term,
1-0-0)
The technical and professional duties and responsibilities of the engineer; the ethics of the engineering profession; technical and professional organizations. The role of the engineer in the social environment including elements of equity, concepts of sustainable development and environmental stewardship, public and worker safety and health considerations including the context of the Alberta Occupational Health and Safety Act. Note: Restricted to fourth-year traditional and fifth-year co-op engineering students. Must be taken in last term of program.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | D | A | A |
MEC E 461
★ 4.5
(fi 6)(second term,
2-1s-4)
Part 2 of the Capstone Design Project. Working in teams, students will undertake a feasibility study and detailed design of a project which requires students to exercise creative ability, to make assumptions and decisions based on synthesis of technical knowledge, devise new designs, rather than analyse existing ones, and test prototypes for performance and durability. Prerequisite: MEC E 460.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | A | A | A | A | A | A |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
MEC E 403
★ 2.5
(fi 6)(either term or Spring/Summer,
1-0-3)
Selected laboratory experiments in applied mechanics and thermosciences. Prerequisites: MEC E 300, 301, 340 and 360.
Accreditation Units
Engineering Science: 23.6 Units
Engineering Science and Engineering Design: 23.6 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | A | D | A |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
| M: | 224.0 | / | 195 | ✅ |
| NS: | 199.3 | / | 195 | ✅ |
| CS: | 291.6 | / | 225 | ✅ |
| ES: | 1233.1 | / | 225 | ✅ |
| ED: | 505.7 | / | 225 | ✅ |
| M+NS: | 423.3 | / | 420 | ✅ |
| ES+ED: | 1738.8 | / | 900 | ✅ |
| Total: | 2453.7 | / | 1850 | ✅ |
TOTAL
ENG M 310/401
ENG M 310
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
The application of the fundamentals of economics to engineering alternatives in planning, developing and managing industrial projects. Note: Credit cannot be obtained for more than one of ENGG 310, 401, ENG M 310 or 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
ENG M 401
★ 3.0
(fi 6)(either term,
3-0-0)
The application of the fundamentals of engineering economics, financial analysis and market assessment to engineering alternatives in the planning, development and ongoing management of industrial enterprises. The course covers the use of engineering, economic, financial and market assessment information in investment and business operation decisions in technology oriented companies. Note: Credit cannot be obtained for more than one of ENGG 310, ENGG 401, ENG M 310, or ENG M 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
MEC E 430/480
MEC E 430
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
The isentropic flow relations, variable area ducts, normal and oblique shocks, Prandtl-Meyer expansions, flow in ducts (Rayleigh, Fanno, isothermal), applications to engineering systems. Prerequisite: MEC E 331.
Accreditation Units
Engineering Science and Engineering Design: 37.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | A | A | A |
MEC E 480
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Special topics for beams, torsion, pressure vessels, plane stress and strain, stability, fracture mechanics. Prerequisites: MEC E 360; MEC E 380; MEC E 395 or MATH 300.
Accreditation Units
Engineering Science and Engineering Design: 37.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | D | D | A | A | A |
MEC E 46X
MEC E 409
★ 4.0
(fi 6)(either term or Spring/Summer,
2-0-4)
Selected group projects in experimental measurement and mechanical design. Two to four person groups develop planning, design, testing and report writing skills on projects in applied mechanics, thermosciences and engineering management. Prerequisites: MEC E 301 and ENG M 310 or 401.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | I | D | D | I |
MEC E 463
★ 4.0
(fi 6)(either term or Spring/Summer,
3-0-2)
Design and optimization of thermo-fluid systems, heating and ventilating equipment and load calculations, system design, piping networks, heat exchanger analysis and design, computer-aided design projects. Prerequisites: MEC E 330 or 331, 340, and 370 or 371.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | A | D | D | D | D | D | D |
MEC E 464
★ 4.0
(fi 2)(either term or Spring/Summer,
1-2s-4)
Design of machine components for ease of manufacture. Application of measurement, inspection, and reverse engineering techniques. Preparation of working drawings for manufacturing. Introduction to machining operations, including hands-on machine shop practice. Evaluation of design performance. Sections offered at an increased rate of fee assessment; refer to the Tuition and Fees page in the University Regulations sections of the Calendar. Prerequisites: MEC E 260, 265, 300, and 301.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | A | A | D | D |
MEC E 466
★ 4.0
(fi 6)(either term or Spring/Summer,
3-0-2)
Design and analysis of building systems for maintaining the indoor environment. Design of heating, ventilation and air conditioning systems through load calculations, equipment selection and specification. Prerequisites: MEC E 340, 370 or 371.
Accreditation Units
Engineering Design: 25.2 Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | D | D |
MEC E 4SM
MEC E 467
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Modeling and analysis of systems and processes that include technological decision making. Formulation and solution methods for systems including associated resource requirements and other system inputs. Numerical methods for simulation. Projects will involve simulation software to support analysis and design of engineering systems and processes. Prerequisites: MEC E 250 and 390. Note that credit cannot be obtained in both MEC E 467 and ENG M 541.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | D | A |
MEC E 468
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Computer modelling in mechanical engineering. Simulation of mechanisms. Stress analysis and heat transfer using commercial software. Emphasis is on numerical model design including testing and verification methods, and the critical interpretation of the computed results. Credit cannot be obtained in both MEC E 468 and 568. Prerequisites: MEC E 265, 362, 370 or 371, 380, 390.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
MEC E 539
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Model selection and simplification, grid generation and grid independence, transient and advection terms treatment, turbulence modeling, verification and validation, best practices. Hands-on experience with commercial CFD codes to demonstrate the application of: theory, proper setup and analysis. Prerequisites: MEC E 390, and 331 or equivalent.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A |
MEC E 563
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Application of finite element methods to mechanical engineering problems; topics include direct stiffness methods, assembly, constraints, solution techniques, post-processing, element types and the Galkerin procedure. Applications include beam truss and frame analysis, plane strain and stress problems, heat transfer and dynamic analysis Prerequisites: MATH 300, MEC E 360, 390.
Accreditation Units
Engineering Design: 17.0 Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | A |
Term 1
CHEM 103
★ 4.3
(fi 6)(either term,
3-1s-3/2)
Atoms and molecules, states of matter, chemistry of the elements. Prerequisite: Chemistry 30, or equivalent. Note: Restricted to Engineering students only. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 53.5 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
ENGG 110
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-2)
Introduction to engineering as a profession. At the core of engineering is design, communication, and professionalism in a multidisciplinary context. This course focuses on foundational design processes, teamwork, and communication skills for engineering practice, including written, oral, and visual communication with diverse audiences. Topics include organizing and structuring information, fundamental writing skills, engineering document types, targeting the audience, presentation strategies, and the professional responsibilities of engineers, including ethics, equity, and public and worker health and safety.
Accreditation Units
Engineering Design: 12.6 Units
Engineering Science and Engineering Design: 12.6 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I | I | I | I | I |
ENGG 151
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-3/2)
Application of calculus and linear algebra to modelling of engineering systems with an emphasis on mechanics. Equilibrium analysis of rigid bodies and structures. Calculation of forces and moments. Use of vectors and matrix equations to represent and solve systems of interacting components. Corequisite: ENGG 150.
Accreditation Units
Natural Sciences: 16.1 Units
Math and Natural Sciences: 32.1 Units
Engineering Science: 21.4 Units
Engineering Science and Engineering Design: 21.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I |
ENGG 153
★ 3.0
(fi 6)(Fall or Winter,
3-1s-2)
An applied introduction to engineering computation. Topics may include data handling, analysis, and visualization; algorithmic problem-solving and programming; and the use of artificial intelligence tools for developing computational solutions. Emphasis is placed on testing and verification, interpretation and communication of results, and the responsible use of computational tools in engineering practice.
Accreditation Units
Math and Natural Sciences: 5.7 Units
Complimentary Studies: 5.7 Units
Engineering Science: 45.4 Units
Engineering Science and Engineering Design: 45.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I | I | I | I | I |
ENGG 150
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-3/2)
Application of calculus to modelling of engineering systems with an emphasis on mechanics. Kinematics and dynamics of particles and rigid bodies. Newton’s laws of motion in linear and rotational systems. Use of differentiation and integration as tools for modelling relationships between engineering variables. Corequisite: ENGG 151.
Accreditation Units
Natural Sciences: 17.7 Units
Math and Natural Sciences: 44.4 Units
Engineering Science: 9.1 Units
Engineering Science and Engineering Design: 9.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I |
Term 2
PHYS 130
★ 3.8
(fi 6)(either term,
3-0-3/2)
Geometrical optics, optical instruments, oscillations, waves, sound, interference, diffraction. Prerequisites: Mathematics 30-1, Mathematics 31, Physics 30. Corequisite: MATH 100 or 113 or 114 or 117 or 134 or 144 or equivalent. Restricted to Engineering students. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
ENGG 111
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-2)
A continuation of engineering design, communication, and the profession with emphasis on applying design, communication, and collaboration skills in varied engineering contexts, including in teams, with diverse interest holders, engagement with clients, communities, and the use of communication and presentation technologies in engineering work. Topics also include written and visual communication of data and results, the engineering code of ethics, equity, legal and professional responsibilities, and broader obligations related to the impact of engineering on society, such as sustainable development, environmental stewardship, and public safety and welfare. Prerequisite: ENGG 110.
Accreditation Units
Engineering Design: 50.4 Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I | I | I | I | I |
ENGG 155
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Introduction to modelling, analysis, and simulation of lumped-parameter, time-dependent engineering systems. Topics include first- and second-order ordinary differential equation models; RC, RL, and RLC circuits; mechanical oscillators; damping, resonance, forced response, complex-number representations, Fourier series, Laplace transforms, transfer functions, frequency response, and introductory feedback. Prerequisites: ENGG 150 and ENGG 151. Corequisite: ENGG 156.
Accreditation Units
Natural Sciences: 5.4 Units
Math and Natural Sciences: 26.8 Units
Complimentary Studies: 2.7 Units
Engineering Science: 24.1 Units
Engineering Science and Engineering Design: 24.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I |
ENGG 156
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Modelling of lumped and distributed engineering systems using ordinary and elementary partial differential equations. Multidisciplinary applications may include dynamical systems, open-channel flow, beam deflection, and steady and unsteady heat conduction. Topics will be explored using various mathematical methods, including those based on eigenvalue, phase plane, and similarity analysis. Prerequisites: ENGG 150 and ENGG 151. Corequisite: ENGG 155.
Accreditation Units
Natural Sciences: 8.0 Units
Math and Natural Sciences: 29.5 Units
Complimentary Studies: 1.3 Units
Engineering Science: 22.8 Units
Engineering Science and Engineering Design: 22.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I |
COMP E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Complementary Studies Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D |
Term 3
ENGG 250
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Modelling of three-dimensional engineering systems and processes using multivariable mathematics and vector calculus. Engineering applications may include heat and mass transport, fluid flow, electromagnetics, and thermodynamics. Techniques include differentiation and integration in multiple dimensions, polar and spherical coordinates, vector calculus fundamentals, gradient, divergence, curl, and curves and surfaces. Prerequisite: ENGG 155, ENGG 156; co-requisite ENGG 250, ENGG 251.
Accreditation Units
Natural Sciences: 8.0 Units
Math and Natural Sciences: 34.8 Units
Engineering Science: 18.7 Units
Engineering Science and Engineering Design: 18.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I | I |
ENGG 251
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Modelling of spatially distributed engineering systems using partial differential equations. Engineering applications may include structural vibrations, stress propagation, heat and mass transport, electromagnetic fields, and steady-state spatially distributed systems. Topics include formulation of well-posed boundary-value and initial-boundary-value PDE problems, analytical solution by separation of variables, interpretation of solutions and extraction of quantitative engineering metrics, and links to numerical simulation methods Prerequisite: ENGG 155, ENGG 156; co-requisite ENGG 250, ENGG 255.
Accreditation Units
Natural Sciences: 7.5 Units
Math and Natural Sciences: 30.5 Units
Engineering Science: 23.0 Units
Engineering Science and Engineering Design: 23.0 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | I | D | D | D | D |
ENGG 255
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-2)
Sources and definitions of error, convergence and stability, root finding, solution of linear and nonlinear systems of equations, regression and curve fitting, numerical differentiation, numerical integration, numerical solution of initial value and boundary value ordinary differential equations, numerical approaches to partial differential equations and discretization, finite difference methods, introductory meshing concepts, stability considerations, and introductory finite element method workflow. Engineering applications are drawn from multiple disciplines. Corequisites: ENGG 250, ENGG 251.
Accreditation Units
Natural Sciences: 2.8 Units
Math and Natural Sciences: 28.3 Units
Engineering Science: 28.3 Units
Engineering Science and Engineering Design: 28.3 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | A | D | D |
MEC E 230
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Introduction to modes of heat transfer. One dimensional heat conduction. Heat transfer from surfaces. Introduction to fluid mechanics. Fluid properties. Fluid statics. Use of control volumes. Internal flows. Prerequisites: MATH 101, EN PH 131.
Accreditation Units
Math and Natural Sciences: 11.0 Units
Engineering Science: 33.1 Units
Engineering Science and Engineering Design: 33.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I |
MEC E 250
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Moments of inertia. Kinematics and kinetics of rigid body motion, energy and momentum methods, impact, mechanical vibrations. Prerequisites: ENGG 130, EN PH 131 and MATH 101. There is a consolidated exam.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I |
Term 4
ENG M 310/401
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
A choice ONE of a the following engineering managment courses, be aware of when courses are scheduled: Corequisites: ENG M 310, ENG M 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
MEC E 260
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
Design morphology, analysis and design of components, mechanical design with electric motors, computer-aided design introduction, design project. Prerequisite: ENGG 160. Corequisite: MEC E 265 and CIV E 270.
Accreditation Units
Math and Natural Sciences: 22.1 Units
Engineering Design: 22.1 Units
Engineering Science and Engineering Design: 22.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | D | I | D | D | D | I | I | I | I | I | D |
MEC E 265
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
Engineering drawing and sketching, conventional drafting, computer-aided drawing in 2D and 3D, solid modelling, and computer-aided design.
Accreditation Units
Engineering Design: 11.0 Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | D | D | D | I | I | I | I | D |
MEC E 290N
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
(NOTE: a consolidations of the concepts from MATH 201 and MEC E 395) MATH 201 is: First-order equations; second-order linear equations: reduction of order, variation of parameters; Laplace transform; linear systems; power series; solution by series; separation of variables for PDEs. MEC E 395 is: Formulation of initial and boundary value problems necessary to model physical scenarios in mechanical engineering, and understanding their effect on solution outcomes. Prerequisites: MATH 201, MATH 209, MEC E 230, MEC E 250, CIV E 270. Credit cannot be obtained for BOTH MATH 300 and MEC E 395.
Accreditation Units
Math and Natural Sciences: 35.4 Units
Engineering Science: 11.8 Units
Engineering Science and Engineering Design: 11.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | A | D | D |
MEC E 300N
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
(NOTE: This is MEC E 300 updated to add conepts need form STAT 235) Characterization and behavior of measuring systems. Statistics and analysis of measurement data; measurement techniques applied to fundamental mechanical engineering phenomena. Prerequisites: CIV E 270, ECE 209, STAT 235. Corequisite: MEC E 330 or MEC E 331.
Accreditation Units
Math and Natural Sciences: 13.2 Units
Engineering Science: 30.9 Units
Engineering Science and Engineering Design: 30.9 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | A | A | D | D |
Term 5
MEC E 301
★ 2.5
(fi 6)(either term or Spring/Summer,
1-0-3)
Laboratory experiments in mechanical engineering measurement techniques, treatment of measurement data, introduction to engineering report writing. Corequisite: MEC E 300.
Accreditation Units
Engineering Science: 9.4 Units
Engineering Design: 12.6 Units
Engineering Science and Engineering Design: 22.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | I | D | D | D | D | D | D | D |
MEC E 331
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-1)
External flow, boundary layers, momentum theories, similitude, fluid metering, fluid friction, fluid friction in pipes, pipe networks. Prerequisites: MEC E 230, MEC E 250, MATH 209. Corequisite: MEC E 240 or CH E 243. Credit can only be granted for one of MEC E 330 or MEC E 331.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | D | I | D | D | D |
MEC E 420
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-3/2)
Design of linear feedback control systems for command-following error, stability, and dynamic response specifications. PID, Root-locus, frequency response and design techniques. An introduction to structural design limitations. Examples emphasizing Mechanical Engineering systems. Some use of computer aided design with MATLAB/Simulink. Controls Lab - control of mechanical systems. Prerequisites: MEC E 390. Credit can only be granted for one of MEC E 420, ECE 362, CH E 448.
Accreditation Units
Engineering Design: 11.8 Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | D | A | D | D | D |
MEC E 364N
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
(NOTE: a combination of MEC E 364 and any missing elements from MAT E 202) Primary manufacturing processes, including casting, forming, machining, additive manufacturing, powder metallurgy and surface technology. Interactions between design, materials and processes, and laboratory activities. May require payment of additional student instructional support fees. Refer to the Tuition and Fees page in the University Regulations section of the Calendar.
Accreditation Units
Math and Natural Sciences: 13.2 Units
Engineering Science: 30.9 Units
Engineering Science and Engineering Design: 30.9 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | I | I | D | D | D | I | I | I | I | D |
MEC E 371
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Mechanisms of heat transfer, steady and unsteady heat conduction, numerical analysis, thermal radiation, free and forced convection, heat exchanger analysis and heat transfer with change of phase and mass transfer. Prerequisites: MEC E 230; MEC E 240 or CH E 243. Corequisites: MEC E 331; and MEC E 395 or MATH 300.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | I | D | D | D |
MEC E 380
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Stress, strain, stress-strain relation, time-independent and time-dependent behavior, virtual work and energy theorems, deformations, indeterminate systems, matrix methods. Prerequisite: CIV E 270.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | D |
Term 6
MEC E 360*
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-1.5)
NOTE: Trim down the analysis side by moving content to MEC E 365N. Have an actual build project that is more canned (meaning the instructor has a solution to compare all analysis of the student design) that includes optimization. Increase the discussion of design theory, safety, risk management. Undertake detailed costing of available components as well as designed components. Detailed design and packaging (MEC E 360 current: Design procedures, theories of failure, material selection, design for fatigue, creep and relaxation, selection of gears and bearings and application of computer-aided design software.) Prerequisite: MEC E 260 and 265, MAT E 202 and CIV E 270. Corequisite: MEC E 362, MEC E 365N.
Accreditation Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | D | D | D | D | D | D |
MEC E 365N
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
Advance CAD concepts, numerical simulation using solid models, companion to MEC E 360N, fulfills the simulation requirement. Prerequisite: MEC E 265N.
Accreditation Units
Engineering Science: 11.0 Units
Engineering Design: 26.5 Units
Engineering Science and Engineering Design: 37.5 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | D | D | A | A | D | I | I | I | I | D |
MEC E 340
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-1)
Thermodynamic applications of gas, vapour, and combined power cycles. Heat pump and refrigeration cycles. Gas mixtures, real gases, and psychrometry. Chemical reactions. Prerequisite: MEC E 240 or CH E 243.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | D | D |
MEC E 451
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-2/2)
Free and forced vibration of single degree of freedom systems with and without damping, free and forced vibration of undamped multi-degree of freedom systems, vibration of continuous systems, introduction to engineering acoustics. Prerequisites: MEC E 250 and MATH 201.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | D | D | D | D |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
ITS E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Impact of Technology on Society from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D |
Term 7
MEC E 4SM
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-3)
A choice ONE of a the following design courses, be aware of when courses are scheduled: Corequisites: MEC E 467, MEC E 468, MEC E 539, MEC E 563.
Accreditation Units
Engineering Design: 17.0 Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | A |
MEC E 460
★ 4.5
(fi 6)(first term,
2-1s-4)
Part 1 of the Capstone Design Project. Working in teams, students will undertake a feasibility study and detailed design of a project which requires students to exercise creative ability, to make assumptions and decisions based on synthesis of technical knowledge, and in general, devise new designs, rather than analyse existing ones, and test prototypes for performance and durability. Prerequisite: MEC E 360, Corequisite: ENG M 401.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | A | A | A | A | A | A |
MEC E 403
★ 2.5
(fi 6)(either term or Spring/Summer,
1-0-3)
Selected laboratory experiments in applied mechanics and thermosciences. Prerequisites: MEC E 300, 301, 340 and 360.
Accreditation Units
Engineering Science: 23.6 Units
Engineering Science and Engineering Design: 23.6 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | A | D | A |
MEC E 430/480
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
A choice between MEC E 430 or MEC E 480, be aware of when courses are scheduled Corequisites: MEC E 430, MEC E 480.
Accreditation Units
Engineering Science and Engineering Design: 37.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | A | A | A |
MEC E 46X
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-2)
A choice ONE of a the following design courses, be aware of when courses are scheduled: Corequisites: MEC E 409, MEC E 463, MEC E 464, MEC E 466.
Accreditation Units
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
Term 8
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
ENGG 400
★ 1.0
(fi 2)(either term,
1-0-0)
The technical and professional duties and responsibilities of the engineer; the ethics of the engineering profession; technical and professional organizations. The role of the engineer in the social environment including elements of equity, concepts of sustainable development and environmental stewardship, public and worker safety and health considerations including the context of the Alberta Occupational Health and Safety Act. Note: Restricted to fourth-year traditional and fifth-year co-op engineering students. Must be taken in last term of program.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | D | A | A |
MEC E 461
★ 4.5
(fi 6)(second term,
2-1s-4)
Part 2 of the Capstone Design Project. Working in teams, students will undertake a feasibility study and detailed design of a project which requires students to exercise creative ability, to make assumptions and decisions based on synthesis of technical knowledge, devise new designs, rather than analyse existing ones, and test prototypes for performance and durability. Prerequisite: MEC E 460.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | A | A | A | A | A | A |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
| M: | 215.3 | / | 195 | ✅ |
| NS: | 212.5 | / | 195 | ✅ |
| CS: | 298.2 | / | 225 | ✅ |
| ES: | 1291.5 | / | 225 | ✅ |
| ED: | 518.0 | / | 225 | ✅ |
| M+NS: | 427.8 | / | 420 | ✅ |
| ES+ED: | 1809.5 | / | 900 | ✅ |
| Total: | 2535.5 | / | 1850 | ✅ |
TOTAL
ENG M 310/401
ENG M 310
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
The application of the fundamentals of economics to engineering alternatives in planning, developing and managing industrial projects. Note: Credit cannot be obtained for more than one of ENGG 310, 401, ENG M 310 or 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
ENG M 401
★ 3.0
(fi 6)(either term,
3-0-0)
The application of the fundamentals of engineering economics, financial analysis and market assessment to engineering alternatives in the planning, development and ongoing management of industrial enterprises. The course covers the use of engineering, economic, financial and market assessment information in investment and business operation decisions in technology oriented companies. Note: Credit cannot be obtained for more than one of ENGG 310, ENGG 401, ENG M 310, or ENG M 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
MEC E 430/480
MEC E 430
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
The isentropic flow relations, variable area ducts, normal and oblique shocks, Prandtl-Meyer expansions, flow in ducts (Rayleigh, Fanno, isothermal), applications to engineering systems. Prerequisite: MEC E 331.
Accreditation Units
Engineering Science and Engineering Design: 37.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | D | A | A | A |
MEC E 480
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Special topics for beams, torsion, pressure vessels, plane stress and strain, stability, fracture mechanics. Prerequisites: MEC E 360; MEC E 380; MEC E 395 or MATH 300.
Accreditation Units
Engineering Science and Engineering Design: 37.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | D | D | A | A | A |
MEC E 46X
MEC E 409
★ 4.0
(fi 6)(either term or Spring/Summer,
2-0-4)
Selected group projects in experimental measurement and mechanical design. Two to four person groups develop planning, design, testing and report writing skills on projects in applied mechanics, thermosciences and engineering management. Prerequisites: MEC E 301 and ENG M 310 or 401.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | I | D | D | I |
MEC E 463
★ 4.0
(fi 6)(either term or Spring/Summer,
3-0-2)
Design and optimization of thermo-fluid systems, heating and ventilating equipment and load calculations, system design, piping networks, heat exchanger analysis and design, computer-aided design projects. Prerequisites: MEC E 330 or 331, 340, and 370 or 371.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | A | D | D | D | D | D | D |
MEC E 464
★ 4.0
(fi 2)(either term or Spring/Summer,
1-2s-4)
Design of machine components for ease of manufacture. Application of measurement, inspection, and reverse engineering techniques. Preparation of working drawings for manufacturing. Introduction to machining operations, including hands-on machine shop practice. Evaluation of design performance. Sections offered at an increased rate of fee assessment; refer to the Tuition and Fees page in the University Regulations sections of the Calendar. Prerequisites: MEC E 260, 265, 300, and 301.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | A | A | D | D |
MEC E 466
★ 4.0
(fi 6)(either term or Spring/Summer,
3-0-2)
Design and analysis of building systems for maintaining the indoor environment. Design of heating, ventilation and air conditioning systems through load calculations, equipment selection and specification. Prerequisites: MEC E 340, 370 or 371.
Accreditation Units
Engineering Design: 25.2 Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | D | D |
MEC E 4SM
MEC E 467
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Modeling and analysis of systems and processes that include technological decision making. Formulation and solution methods for systems including associated resource requirements and other system inputs. Numerical methods for simulation. Projects will involve simulation software to support analysis and design of engineering systems and processes. Prerequisites: MEC E 250 and 390. Note that credit cannot be obtained in both MEC E 467 and ENG M 541.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | D | A |
MEC E 468
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Computer modelling in mechanical engineering. Simulation of mechanisms. Stress analysis and heat transfer using commercial software. Emphasis is on numerical model design including testing and verification methods, and the critical interpretation of the computed results. Credit cannot be obtained in both MEC E 468 and 568. Prerequisites: MEC E 265, 362, 370 or 371, 380, 390.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
MEC E 539
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Model selection and simplification, grid generation and grid independence, transient and advection terms treatment, turbulence modeling, verification and validation, best practices. Hands-on experience with commercial CFD codes to demonstrate the application of: theory, proper setup and analysis. Prerequisites: MEC E 390, and 331 or equivalent.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A |
MEC E 563
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Application of finite element methods to mechanical engineering problems; topics include direct stiffness methods, assembly, constraints, solution techniques, post-processing, element types and the Galkerin procedure. Applications include beam truss and frame analysis, plane strain and stress problems, heat transfer and dynamic analysis Prerequisites: MATH 300, MEC E 360, 390.
Accreditation Units
Engineering Design: 17.0 Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | A |
Term 1
CHEM 103
★ 4.3
(fi 6)(either term,
3-1s-3/2)
Atoms and molecules, states of matter, chemistry of the elements. Prerequisite: Chemistry 30, or equivalent. Note: Restricted to Engineering students only. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 53.5 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
ENGG 110
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-2)
Introduction to engineering as a profession. At the core of engineering is design, communication, and professionalism in a multidisciplinary context. This course focuses on foundational design processes, teamwork, and communication skills for engineering practice, including written, oral, and visual communication with diverse audiences. Topics include organizing and structuring information, fundamental writing skills, engineering document types, targeting the audience, presentation strategies, and the professional responsibilities of engineers, including ethics, equity, and public and worker health and safety.
Accreditation Units
Engineering Design: 12.6 Units
Engineering Science and Engineering Design: 12.6 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I | I | I | I | I |
ENGG 151
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-3/2)
Application of calculus and linear algebra to modelling of engineering systems with an emphasis on mechanics. Equilibrium analysis of rigid bodies and structures. Calculation of forces and moments. Use of vectors and matrix equations to represent and solve systems of interacting components. Corequisite: ENGG 150.
Accreditation Units
Natural Sciences: 16.1 Units
Math and Natural Sciences: 32.1 Units
Engineering Science: 21.4 Units
Engineering Science and Engineering Design: 21.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I |
ENGG 153
★ 3.0
(fi 6)(Fall or Winter,
3-1s-2)
An applied introduction to engineering computation. Topics may include data handling, analysis, and visualization; algorithmic problem-solving and programming; and the use of artificial intelligence tools for developing computational solutions. Emphasis is placed on testing and verification, interpretation and communication of results, and the responsible use of computational tools in engineering practice.
Accreditation Units
Math and Natural Sciences: 5.7 Units
Complimentary Studies: 5.7 Units
Engineering Science: 45.4 Units
Engineering Science and Engineering Design: 45.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I | I | I | I | I |
ENGG 150
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-3/2)
Application of calculus to modelling of engineering systems with an emphasis on mechanics. Kinematics and dynamics of particles and rigid bodies. Newton’s laws of motion in linear and rotational systems. Use of differentiation and integration as tools for modelling relationships between engineering variables. Corequisite: ENGG 151.
Accreditation Units
Natural Sciences: 17.7 Units
Math and Natural Sciences: 44.4 Units
Engineering Science: 9.1 Units
Engineering Science and Engineering Design: 9.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I |
Term 2
PHYS 130
★ 3.8
(fi 6)(either term,
3-0-3/2)
Geometrical optics, optical instruments, oscillations, waves, sound, interference, diffraction. Prerequisites: Mathematics 30-1, Mathematics 31, Physics 30. Corequisite: MATH 100 or 113 or 114 or 117 or 134 or 144 or equivalent. Restricted to Engineering students. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
ENGG 111
★ 3.0
(fi 6)(either term or Spring/Summer,
3-2s-2)
A continuation of engineering design, communication, and the profession with emphasis on applying design, communication, and collaboration skills in varied engineering contexts, including in teams, with diverse interest holders, engagement with clients, communities, and the use of communication and presentation technologies in engineering work. Topics also include written and visual communication of data and results, the engineering code of ethics, equity, legal and professional responsibilities, and broader obligations related to the impact of engineering on society, such as sustainable development, environmental stewardship, and public safety and welfare. Prerequisite: ENGG 110.
Accreditation Units
Engineering Design: 50.4 Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I | I | I | I | I |
ENGG 155
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Introduction to modelling, analysis, and simulation of lumped-parameter, time-dependent engineering systems. Topics include first- and second-order ordinary differential equation models; RC, RL, and RLC circuits; mechanical oscillators; damping, resonance, forced response, complex-number representations, Fourier series, Laplace transforms, transfer functions, frequency response, and introductory feedback. Prerequisites: ENGG 150 and ENGG 151. Corequisite: ENGG 156.
Accreditation Units
Natural Sciences: 5.4 Units
Math and Natural Sciences: 26.8 Units
Complimentary Studies: 2.7 Units
Engineering Science: 24.1 Units
Engineering Science and Engineering Design: 24.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I |
ENGG 156
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Modelling of lumped and distributed engineering systems using ordinary and elementary partial differential equations. Multidisciplinary applications may include dynamical systems, open-channel flow, beam deflection, and steady and unsteady heat conduction. Topics will be explored using various mathematical methods, including those based on eigenvalue, phase plane, and similarity analysis. Prerequisites: ENGG 150 and ENGG 151. Corequisite: ENGG 155.
Accreditation Units
Natural Sciences: 8.0 Units
Math and Natural Sciences: 29.5 Units
Complimentary Studies: 1.3 Units
Engineering Science: 22.8 Units
Engineering Science and Engineering Design: 22.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I |
COMP E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Complementary Studies Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D |
Term 3
ENGG 250
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Modelling of three-dimensional engineering systems and processes using multivariable mathematics and vector calculus. Engineering applications may include heat and mass transport, fluid flow, electromagnetics, and thermodynamics. Techniques include differentiation and integration in multiple dimensions, polar and spherical coordinates, vector calculus fundamentals, gradient, divergence, curl, and curves and surfaces. Prerequisite: ENGG 155, ENGG 156; co-requisite ENGG 250, ENGG 251.
Accreditation Units
Natural Sciences: 8.0 Units
Math and Natural Sciences: 34.8 Units
Engineering Science: 18.7 Units
Engineering Science and Engineering Design: 18.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I | I |
ENGG 251
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-3/2)
Modelling of spatially distributed engineering systems using partial differential equations. Engineering applications may include structural vibrations, stress propagation, heat and mass transport, electromagnetic fields, and steady-state spatially distributed systems. Topics include formulation of well-posed boundary-value and initial-boundary-value PDE problems, analytical solution by separation of variables, interpretation of solutions and extraction of quantitative engineering metrics, and links to numerical simulation methods Prerequisite: ENGG 155, ENGG 156; co-requisite ENGG 250, ENGG 255.
Accreditation Units
Natural Sciences: 7.5 Units
Math and Natural Sciences: 30.5 Units
Engineering Science: 23.0 Units
Engineering Science and Engineering Design: 23.0 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | I | D | D | D | D |
ENGG 255
★ 3.0
(fi 6)(either term or Spring/Summer,
3-1s-2)
Sources and definitions of error, convergence and stability, root finding, solution of linear and nonlinear systems of equations, regression and curve fitting, numerical differentiation, numerical integration, numerical solution of initial value and boundary value ordinary differential equations, numerical approaches to partial differential equations and discretization, finite difference methods, introductory meshing concepts, stability considerations, and introductory finite element method workflow. Engineering applications are drawn from multiple disciplines. Corequisites: ENGG 250, ENGG 251.
Accreditation Units
Natural Sciences: 2.8 Units
Math and Natural Sciences: 28.3 Units
Engineering Science: 28.3 Units
Engineering Science and Engineering Design: 28.3 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | A | D | D |
MEC E 230N
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-3/2)
The first is a set of thermo-fluid themed course addressing the most fundamental elements of MEC E 230, 240, 331, 340, 371 and 430.
Accreditation Units
Natural Sciences: 14.2 Units
Math and Natural Sciences: 21.3 Units
Engineering Science: 26.0 Units
Engineering Science and Engineering Design: 26.0 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I |
MEC E 250N
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-3/2)
The first in a set of solid mechanics courses addressing the most fundamental elements of CIV E 270, MEC E 250, 380, 362, 480.
Accreditation Units
Natural Sciences: 14.2 Units
Math and Natural Sciences: 21.3 Units
Engineering Science: 26.0 Units
Engineering Science and Engineering Design: 26.0 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I |
Term 4
ENG M 310/401
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
A choice ONE of a the following engineering managment courses, be aware of when courses are scheduled: Corequisites: ENG M 310, ENG M 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
MEC E 260N
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
Design morphology, analysis and design of components, mechanical design with electric motors, computer-aided design introduction, design project. Prerequisite: ENGG 160. Corequisite: MEC E 265 and CIV E 270.
Accreditation Units
Engineering Science: 11.0 Units
Engineering Design: 26.5 Units
Engineering Science and Engineering Design: 37.5 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | D | D | D | D | I | I | I | I | D |
MEC E 265N
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
Engineering drawing and sketching, conventional drafting, computer-aided drawing in 2D and 3D, solid modelling, and computer-aided design.
Accreditation Units
Engineering Science: 11.0 Units
Engineering Design: 26.5 Units
Engineering Science and Engineering Design: 37.5 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | D | D | D | D | I | I | I | I | D |
MEC E 290N
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
(NOTE: a consolidations of the concepts from MATH 201 and MEC E 395) MATH 201 is: First-order equations; second-order linear equations: reduction of order, variation of parameters; Laplace transform; linear systems; power series; solution by series; separation of variables for PDEs. MEC E 395 is: Formulation of initial and boundary value problems necessary to model physical scenarios in mechanical engineering, and understanding their effect on solution outcomes. Prerequisites: MATH 201, MATH 209, MEC E 230, MEC E 250, CIV E 270. Credit cannot be obtained for BOTH MATH 300 and MEC E 395.
Accreditation Units
Math and Natural Sciences: 35.4 Units
Engineering Science: 11.8 Units
Engineering Science and Engineering Design: 11.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | A | D | D |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
Term 5
MEC E 330N
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-3/2)
The second is a set of thermo-fluid themed course addressing the most fundamental elements of MEC E 230, 240, 331, 340, 371 and 430. Prerequisite: MEC E 230N.
Accreditation Units
Natural Sciences: 9.5 Units
Math and Natural Sciences: 16.5 Units
Engineering Science: 26.0 Units
Engineering Design: 4.7 Units
Engineering Science and Engineering Design: 30.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I | I | I |
MEC E 350N
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-3/2)
The second in a set of solid mechanics courses addressing the most fundamental elements of CIV E 270, MEC E 250, 380, 362, 480. Prerequisite: MEC E 250N.
Accreditation Units
Natural Sciences: 9.5 Units
Math and Natural Sciences: 16.5 Units
Engineering Science: 26.0 Units
Engineering Design: 4.7 Units
Engineering Science and Engineering Design: 30.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I | I | I |
MEC E 301N
★ 2.5
(fi 6)(either term or Spring/Summer,
1-0-3)
The first of a set of courses on laboratory experiments in mechanical engineering measurement techniques, treatment of measurement data, introduction to engineering report writing. Core elements of MEC E 300, 301, 403
Accreditation Units
Math and Natural Sciences: 4.4 Units
Complimentary Studies: 13.2 Units
Engineering Science: 26.5 Units
Engineering Science and Engineering Design: 26.5 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | D | D | D | D | I | I | I | I | D |
MEC E 364N
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
(NOTE: a combination of MEC E 364 and any missing elements from MAT E 202) Primary manufacturing processes, including casting, forming, machining, additive manufacturing, powder metallurgy and surface technology. Interactions between design, materials and processes, and laboratory activities. May require payment of additional student instructional support fees. Refer to the Tuition and Fees page in the University Regulations section of the Calendar.
Accreditation Units
Math and Natural Sciences: 13.2 Units
Engineering Science: 30.9 Units
Engineering Science and Engineering Design: 30.9 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | I | I | D | D | D | I | I | I | I | D |
MEC E 395N
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
(Note: in context, using AI and simulaiton tools) Formulation of initial and boundary value problems necessary to model physical scenarios in mechanical engineering, and understanding their effect on solution outcomes. Prerequisites: MATH 201, MATH 209, MEC E 230, MEC E 250, CIV E 270. Credit cannot be obtained for BOTH MATH 300 and MEC E 395.
Accreditation Units
Math and Natural Sciences: 29.4 Units
Engineering Science: 14.7 Units
Engineering Science and Engineering Design: 14.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | I | I | D | D | D | I | I | I | I | D |
Term 6
MEC E 420
★ 3.8
(fi 6)(either term or Spring/Summer,
3-0-3/2)
Design of linear feedback control systems for command-following error, stability, and dynamic response specifications. PID, Root-locus, frequency response and design techniques. An introduction to structural design limitations. Examples emphasizing Mechanical Engineering systems. Some use of computer aided design with MATLAB/Simulink. Controls Lab - control of mechanical systems. Prerequisites: MEC E 390. Credit can only be granted for one of MEC E 420, ECE 362, CH E 448.
Accreditation Units
Engineering Design: 11.8 Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | D | A | D | D | D |
MEC E 360N
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
Design morphology, analysis and design of components, design project, standards, risk and safety. Prerequisite: MEC E 260N.
Accreditation Units
Engineering Science: 11.0 Units
Engineering Design: 26.5 Units
Engineering Science and Engineering Design: 37.5 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | D | D | D | A | D | I | I | I | I | D |
MEC E 365N
★ 3.5
(fi 6)(either term or Spring/Summer,
2-0-3)
Advance CAD concepts, numerical simulation using solid models, companion to MEC E 360N, fulfills the simulation requirement. Prerequisite: MEC E 265N.
Accreditation Units
Engineering Science: 11.0 Units
Engineering Design: 26.5 Units
Engineering Science and Engineering Design: 37.5 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | D | D | A | A | D | I | I | I | I | D |
MEC E 451
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-2/2)
Free and forced vibration of single degree of freedom systems with and without damping, free and forced vibration of undamped multi-degree of freedom systems, vibration of continuous systems, introduction to engineering acoustics. Prerequisites: MEC E 250 and MATH 201.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | D | D | D | D |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
Term 7
MEC E 403N
★ 2.5
(fi 6)(either term or Spring/Summer,
1-0-3)
The second of a set of courses on laboratory experiments in mechanical engineering measurement techniques, treatment of measurement data, introduction to engineering report writing. Core elements of MEC E 300, 301, 403. Prerequisite: MEC E 301N.
Accreditation Units
Math and Natural Sciences: 4.4 Units
Complimentary Studies: 13.2 Units
Engineering Science: 26.5 Units
Engineering Science and Engineering Design: 26.5 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | I | D | D | D | I | I | I | I | D |
MEC E 460
★ 4.5
(fi 6)(first term,
2-1s-4)
Part 1 of the Capstone Design Project. Working in teams, students will undertake a feasibility study and detailed design of a project which requires students to exercise creative ability, to make assumptions and decisions based on synthesis of technical knowledge, and in general, devise new designs, rather than analyse existing ones, and test prototypes for performance and durability. Prerequisite: MEC E 360, Corequisite: ENG M 401.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | A | A | A | A | A | A |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
MEC E 46X
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-2)
A choice ONE of a the following design courses, be aware of when courses are scheduled: Corequisites: MEC E 409, MEC E 463, MEC E 464, MEC E 466.
Accreditation Units
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
Term 8
ENGG 400
★ 1.0
(fi 2)(either term,
1-0-0)
The technical and professional duties and responsibilities of the engineer; the ethics of the engineering profession; technical and professional organizations. The role of the engineer in the social environment including elements of equity, concepts of sustainable development and environmental stewardship, public and worker safety and health considerations including the context of the Alberta Occupational Health and Safety Act. Note: Restricted to fourth-year traditional and fifth-year co-op engineering students. Must be taken in last term of program.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | D | A | A |
MEC E 461
★ 4.5
(fi 6)(second term,
2-1s-4)
Part 2 of the Capstone Design Project. Working in teams, students will undertake a feasibility study and detailed design of a project which requires students to exercise creative ability, to make assumptions and decisions based on synthesis of technical knowledge, devise new designs, rather than analyse existing ones, and test prototypes for performance and durability. Prerequisite: MEC E 460.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | A | A | A | A | A | A | A | A | A |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
TECH E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Technical Elective from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
ITS E
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
Choose a Impact of Technology on Society from the approved list.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D |
| M: | 259.9 | / | 195 | ✅ |
| NS: | 235.6 | / | 195 | ✅ |
| CS: | 327.1 | / | 225 | ✅ |
| ES: | 992.5 | / | 225 | ✅ |
| ED: | 497.0 | / | 225 | ✅ |
| M+NS: | 495.5 | / | 420 | ✅ |
| ES+ED: | 1489.5 | / | 900 | ✅ |
| Total: | 2312.1 | / | 1850 | ✅ |
TOTAL
ENG M 310/401
ENG M 310
★ 3.0
(fi 6)(either term or Spring/Summer,
3-0-0)
The application of the fundamentals of economics to engineering alternatives in planning, developing and managing industrial projects. Note: Credit cannot be obtained for more than one of ENGG 310, 401, ENG M 310 or 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
ENG M 401
★ 3.0
(fi 6)(either term,
3-0-0)
The application of the fundamentals of engineering economics, financial analysis and market assessment to engineering alternatives in the planning, development and ongoing management of industrial enterprises. The course covers the use of engineering, economic, financial and market assessment information in investment and business operation decisions in technology oriented companies. Note: Credit cannot be obtained for more than one of ENGG 310, ENGG 401, ENG M 310, or ENG M 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
MEC E 46X
MEC E 409
★ 4.0
(fi 6)(either term or Spring/Summer,
2-0-4)
Selected group projects in experimental measurement and mechanical design. Two to four person groups develop planning, design, testing and report writing skills on projects in applied mechanics, thermosciences and engineering management. Prerequisites: MEC E 301 and ENG M 310 or 401.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | I | D | D | I |
MEC E 463
★ 4.0
(fi 6)(either term or Spring/Summer,
3-0-2)
Design and optimization of thermo-fluid systems, heating and ventilating equipment and load calculations, system design, piping networks, heat exchanger analysis and design, computer-aided design projects. Prerequisites: MEC E 330 or 331, 340, and 370 or 371.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | D | A | D | D | D | D | D | D |
MEC E 464
★ 4.0
(fi 2)(either term or Spring/Summer,
1-2s-4)
Design of machine components for ease of manufacture. Application of measurement, inspection, and reverse engineering techniques. Preparation of working drawings for manufacturing. Introduction to machining operations, including hands-on machine shop practice. Evaluation of design performance. Sections offered at an increased rate of fee assessment; refer to the Tuition and Fees page in the University Regulations sections of the Calendar. Prerequisites: MEC E 260, 265, 300, and 301.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | A | A | D | D |
MEC E 466
★ 4.0
(fi 6)(either term or Spring/Summer,
3-0-2)
Design and analysis of building systems for maintaining the indoor environment. Design of heating, ventilation and air conditioning systems through load calculations, equipment selection and specification. Prerequisites: MEC E 340, 370 or 371.
Accreditation Units
Engineering Design: 25.2 Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A | A | D | D |
MEC E 4SM
MEC E 467
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Modeling and analysis of systems and processes that include technological decision making. Formulation and solution methods for systems including associated resource requirements and other system inputs. Numerical methods for simulation. Projects will involve simulation software to support analysis and design of engineering systems and processes. Prerequisites: MEC E 250 and 390. Note that credit cannot be obtained in both MEC E 467 and ENG M 541.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | D | A |
MEC E 468
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Computer modelling in mechanical engineering. Simulation of mechanisms. Stress analysis and heat transfer using commercial software. Emphasis is on numerical model design including testing and verification methods, and the critical interpretation of the computed results. Credit cannot be obtained in both MEC E 468 and 568. Prerequisites: MEC E 265, 362, 370 or 371, 380, 390.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | I | A | A |
MEC E 539
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Model selection and simplification, grid generation and grid independence, transient and advection terms treatment, turbulence modeling, verification and validation, best practices. Hands-on experience with commercial CFD codes to demonstrate the application of: theory, proper setup and analysis. Prerequisites: MEC E 390, and 331 or equivalent.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | A |
MEC E 563
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Application of finite element methods to mechanical engineering problems; topics include direct stiffness methods, assembly, constraints, solution techniques, post-processing, element types and the Galkerin procedure. Applications include beam truss and frame analysis, plane strain and stress problems, heat transfer and dynamic analysis Prerequisites: MATH 300, MEC E 360, 390.
Accreditation Units
Engineering Design: 17.0 Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | D | A |
Fall Term 1
CHEM 103
★ 4.3
(fi 6)(either term,
3-1s-3/2)
Atoms and molecules, states of matter, chemistry of the elements. Prerequisite: Chemistry 30, or equivalent. Note: Restricted to Engineering students only. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 53.5 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
ENGG 100
★ 1.1
(fi 2)(either term,
.75-.75s-0)
An introduction to the Faculty of Engineering, the engineering profession, the skills required for academic success, and the fundamentals of leadership: study and life skills; time management and goal setting; interpersonal skills; career planning; engineering and society including elements of ethics, equity, concepts of sustainable development, environmental stewardship, and public safety.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I |
ENGG 130
★ 4.0
(fi 6)(either term,
3-0-2)
Equilibrium of planar systems. Analysis of statically determinate trusses and frames. Friction. Centroids and centres of gravity. Forces and moments in beams. Second moments of area. Note: Students in all sections of this course will write a common final examination. Corequisite: MATH 100.
Accreditation Units
Engineering Science and Engineering Design: 50.4 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
ENGL 199
★ 3.0
(fi 6)(either term,
3-0-0)
This course aims to develop the student's ability to provide effective written and oral information. It will focus on instruction in fundamental writing skills, including building effective sentences and paragraphs, and on learning to communicate clearly across a range of genres and media used in academic and professional contexts, including correspondence and presentations. Students will be introduced to the principles of information gathering, analysis, and citation. Note: Restricted to students in the Faculty of Engineering only.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | D |
MATH 100
★ 3.5
(fi 6)(either term,
3-0-1)
Review of numbers, inequalities, functions, analytic geometry; limits, continuity; derivatives and applications, Taylor polynomials; log, exp, and inverse trig functions. Integration, fundamental theorem of calculus substitution, trapezoidal and Simpson's rules. Prerequisites: Mathematics 30-1 and Mathematics 31. Notes: (1) Credit can be obtained in at most one of MATH 100, 113, 114, 117, 134, 144, 154, or SCI 100. (2) Students in all sections of this course will write a common final examination. (3) Restricted to Engineering students. Non-Engineering students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
PHYS 130
★ 3.8
(fi 6)(either term,
3-0-3/2)
Geometrical optics, optical instruments, oscillations, waves, sound, interference, diffraction. Prerequisites: Mathematics 30-1, Mathematics 31, Physics 30. Corequisite: MATH 100 or 113 or 114 or 117 or 134 or 144 or equivalent. Restricted to Engineering students. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I |
Winter Term 2
CHEM 105
★ 3.8
(fi 6)(either term,
3-0-3/2)
Rates of reactions, thermodynamics and equilibrium, coordination chemistry, electrochemistry, modern applications of chemistry. Prerequisite: CHEM 103 or 101. Note: Restricted to Engineering students only. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | D |
ENCMP 100
★ 3.8
(fi 6)(either term,
3-0-1.5)
Fundamentals of computer programming with emphasis on solving engineering problems. Structure and syntax of computer programs, variables, data types, data structures, control structures, functions, input/output operations, debugging, software development process.
Accreditation Units
Engineering Design: 21.3 Units
Engineering Science and Engineering Design: 47.2 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I | I |
ENGG 160
★ 2.0
(fi 4)(either term or Spring/Summer,
1-0-2)
Fundamental design process and theory in a multidisciplinary context. Importance, in engineering design, of communications; team work; the engineering disciplines, career fields; professional responsibilities of the engineer including elements of ethics, equity, concepts of sustainable development and environmental stewardship, public and worker safety and health considerations including the context of the Alberta Occupational Health and Safety Act. Corequisite ENGL 199. This course is delivered in a blended format.
Accreditation Units
Engineering Design: 12.6 Units
Engineering Science and Engineering Design: 12.6 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I | I | I | I | I |
EN PH 131
★ 4.3
(fi 6)(either term,
3-1s-3/2)
Kinematics and dynamics of particles; gravitation; work and energy; linear momentum; angular momentum; systems of particles; introduction to dynamics of rigid bodies. Prerequisites: MATH 100 or 117, and ENGG 130. Corequisite: MATH 101 or 118. Restricted to Engineering students. Other students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 26.8 Units
Engineering Science: 26.8 Units
Engineering Science and Engineering Design: 26.8 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | I |
MATH 101
★ 3.5
(fi 6)(either term,
3-0-1)
Area between curves, techniques of integration. Applications of integration to planar areas and lengths, volumes and masses. First order ordinary differential equations: separable, linear, direction fields, Euler's method, applications. Infinite series, power series, Taylor expansions with remainder terms. Polar coordinates. Rectangular, spherical and cylindrical coordinates in 3-dimensional space. Parametric curves in the plane and space: graphing, arc length, curvature; normal binormal, tangent plane in 3- dimensional space. Volumes and surface areas of rotation. Prerequisite: MATH 100. Notes: (1) Credit can be obtained in at most one of MATH 101, 115, 118, 136, 146, 156 or SCI 100. (2) Students in all sections of this course will write a common final examination. (3) Restricted to Engineering students. Non-Engineering students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | I |
MATH 102
★ 3.5
(fi 6)(either term,
3-0-1)
Vectors and matrices, solution of linear equations, equations of lines and planes, determinants, matrix algebra, orthogonality and applications (Gram-Schmidt), eigenvalues and eigenvectors and applications, complex numbers. Prerequisite or corequisite: MATH 100. Notes: (1) Credit can be obtained in at most one of MATH 102, 125, or 127. (2) Students in all sections of this course will write a common final examination. (3) Restricted to Engineering students. Non-Engineering students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D |
Fall Term 3
ENGG 299
★ 1.5
(fi 2)(first term,
1-1s-0)
An examination of the history, philosophy and objectives of Cooperative Education; introduction to the operation of the Cooperative Education Program; self-assessment of transferable skills and work values; preparation of the resume; practice of job interview skills; goal setting on the job; ethics; human rights; and public and worker safety and health considerations including the context of the Alberta Occupational Health and Safety Act. Note: This course is only open to students registered in the Cooperative Education Program and must be taken prior to a student's first work placement.
Accreditation Units
MATH 201
★ 3.5
(fi 6)(either term or Spring/Summer,
3-0-1)
First-order equations; second-order linear equations: reduction of order, variation of parameters; Laplace transform; linear systems; power series; solution by series; separation of variables for PDEs. Prerequisite or corequisite: MATH 209 or 214. Notes: (1) Open only to students in Engineering and Specialization Geophysics. (2) Credit can be obtained in at most one of MATH 201, MATH 334, MATH 336, or MA PH 251. (3) Students in all sections of this course will write a common final examination. Non-Engineering students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D |
MATH 209
★ 3.5
(fi 6)(either term,
3-0-1)
Partial differentiation, derivatives of integrals. Multiple integration using rectangular, cylindrical, and spherical coordinates. Vector Field Theory. Prerequisite: MATH 101. Prerequisite or corequisite: MATH 102. Notes: (1) This course may not be taken for credit if credit has already been obtained in MATH 215, MATH 315, MATH 317 or MA PH 351. (2) Students in all sections of this course will write a common final examination. (3) Restricted to Engineering students. Non-Engineering students who take this course will receive 3 units.
Accreditation Units
Math and Natural Sciences: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D |
MCTR 202
★ 3.8
(fi 6)(first term,
3-0-3/2)
Circuit element definitions. Circuit laws: Ohm's, KVL, KCL. Resistive voltage and current dividers. Basic loop and nodal analysis. Circuit theorems: linearity, Thevenin. Dependent sources. Time domain behavior of inductance and capacitance, energy storage. Sinusoidal signals, complex numbers, phasor and impedance concepts. Diodes: ideal and simple and models. Treatment of RLC circuits in the time domain, frequency domain and s-plane. Prerequisites: MATH 101 and MATH 102.
Accreditation Units
MCTR 240
★ 3.5
(fi 6)(either term,
3-0-1)
Introduction to linear systems and signal classification. Convolution. Fourier series expansion and Fourier transform (FT). Laplace transform. Sampling and reconstruction. Discrete Fourier transform (DFT) and properties. Spectra analysis. Models of continuous-time systems and discrete-time systems for linear control system Z-transform and inverse Z-transform. Analysis of linear time invariant (LTI) systems. Prerequisites: MCTR 202 and MATH 201.
Accreditation Units
MEC E 230
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Introduction to modes of heat transfer. One dimensional heat conduction. Heat transfer from surfaces. Introduction to fluid mechanics. Fluid properties. Fluid statics. Use of control volumes. Internal flows. Prerequisites: MATH 101, EN PH 131.
Accreditation Units
Math and Natural Sciences: 11.0 Units
Engineering Science: 33.1 Units
Engineering Science and Engineering Design: 33.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I |
MEC E 250
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Moments of inertia. Kinematics and kinetics of rigid body motion, energy and momentum methods, impact, mechanical vibrations. Prerequisites: ENGG 130, EN PH 131 and MATH 101. There is a consolidated exam.
Accreditation Units
Engineering Science and Engineering Design: 44.1 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | D | I | I | I | I |
Winter Term 4
CIV E 270
★ 4.5
(fi 6)(either term or Spring/Summer,
3-0-3)
Plane stress and strain; stress-strain relationships; stresses and deformations resulting from axial and transverse loads; buckling of columns; torsion of circular sections; combined stress; statically indeterminate problems. Laboratory to demonstrate mechanical properties and verify assumptions of analysis. Prerequisites: ENGG 130 and MATH 101.
Accreditation Units
Engineering Science and Engineering Design: 56.7 Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | D |
ECE 342
★ 3.5
(fi 6)(either term or Spring/Summer,
3-1s-0)
Deterministic and probabilistic models. Basics of probability theory: random experiments, axioms of probability, conditional probability and independence. Discrete and continuous random variables: cumulative distribution and probability density functions, functions of a random variable, expected values, transform methods. Pairs of random variables: independence, joint cdf and pdf, conditional probability and expectation, functions of a pair of random variables, jointly Gaussian random variables. Sums of random variables: the central limit theorem; basic types of random processes, wide sense stationary processes, autocorrelation and crosscorrelation, power spectrum, white noise. Prerequisite: MATH 209. Credit may be obtained in only one of ECE 342 or E E 387.
Accreditation Units
MCTR 210
★ 3.5
(fi 6)(second term,
3-0-1)
Number systems, logic gates, Boolean algebra. Karnaugh maps. Combinational networks. State machines. Field programmable gate array (FPGA) implementation. Computer architecture. Assembly language. Addressing modes, subroutines, memory, input-output interfacing, and interrupts.
Accreditation Units
MCTR 260
★ 3.5
(fi 6)(second term,
2-0-3)
Design morphology; analysis and design of mechanical and electro-mechanical components in a mechatronics system; combined loads, failure, safety factors, and risk management concepts; design project aimed at devices or technologies addressing user needs. Corequisite: MCTR 265. Prerequisite: CIV E 270.
Accreditation Units
MCTR 265
★ 3.5
(fi 6)(second term,
2-0-3)
Computer-aided engineering, solid modelling, drafting and design. Introduction to multiphysics simulation. Design project aligned with MCTR 260.
Accreditation Units
MCTR 294
★ 3.8
(fi 6)(first term,
3-0-3/2)
Introduction to object-oriented programming for mechatronic applications. Introduction to data structures and classes with application to mechatronics. Introduction to algorithms. Concepts illustrated on a physical mechatronic system. Prerequisite: ENCMP 100.
Accreditation Units
Fall Term 5
MCTR 300
★ 3.8
(fi 6)(second term,
3-0-3/2)
Transistors, transistor amplifiers, and op-amp circuits; frequency response and filters; analog signal detection, conditioning, analysis, and conversion; transducers and electronic sensors for measuring common physical properties/phenomena. Understanding properties of signals in time and frequency domain; digitization of analog data; statistics, analysis, and uncertainty of measurement data. Prerequisites: MCTR 202 and MCTR 240.
Accreditation Units
MCTR 320
★ 3.8
(fi 6)(second term,
3-0-3/2)
Linear feedback control systems for command-following, stability, and dynamic response specifications. Frequency response and design techniques, including lead, lag compensators and PID control. An introduction to structural design limitations. Introduction to state space models. Examples emphasizing control of mechatronics systems, using computer-aided design. Prerequisite: MCTR 240. Credit can only be granted for one of MCTR 320, MEC E 420, ECE 360, CH E 446.
Accreditation Units
MCTR 350
★ 3.0
(fi 6)(second term,
3-0-0)
Kinematics and dynamics of rigid bodies moving in three dimensions. Spatial kinematics of rigid bodies, Euler angles, tensor of inertia and the Newton-Euler equations of motion for rigid bodies, multi-body dynamics, inverse dynamics for manipulators. Prerequisite: MEC E 250.
Accreditation Units
MCTR 355
★ 3.0
(fi 6)(second term,
3-0-0)
Systems engineering definition, relevance, and benefits. The nature of technological systems and the concept of a system life cycle, from need to retirement. Requirements setting, including standards. Modelling system performance, with emphasis on mechatronic systems. System safety, risk, and reliability analysis. Ethical and sustainability considerations in systems design. Design for manufacturability and control. Design de-risking and testing for requirements compliance. Configuration management. Systems thinking and Indigenous perspectives.
Accreditation Units
MCTR 357
★ 3.8
(fi 6)(second term,
3-0-3/2)
Coordinates systems, robot kinematics (forward and inverse), differential kinematics, robot dynamics, path and trajectory planning, position control, force control, impedance control, teleoperation systems.
Accreditation Units
MCTR 394
★ 3.8
(fi 6)(second term,
3-0-3/2)
Advanced topics in object-oriented programming for mechatronic applications. Advanced data structures, and algorithm analysis and design. Concepts illustrated using a physical mechatronic system and practical mechatronic applications. Introduction to modern robotic and mechatronic operating systems. Prerequisite: MCTR 294.
Accreditation Units
Spring/Summer Term 6
ECE 315
★ 3.8
(fi 6)(either term,
3-0-3/2)
Design and use of digital interfaces, including memory, serial, parallel, synchronous and asynchronous interfaces. Hardware implementations of interrupts, buses, input/output devices and direct memory access. Multitasking software architecture, real-time preemptive multitasking kernels. Data structures and mechanisms for flow control. Computer communications interfaces, interfacing of microcontroller to peripheral devices such as stepper motors. Requires payment of additional student instructional support fees. Refer to the Tuition and Fees page in the University Regulations section of the Calendar. Prerequisite: ECE 212 or E E 380 or CMPUT 229, and 275 or permission of the Instructor. Credit may be obtained in only one of CMPE 401 or ECE 315.
Accreditation Units
MCTR 332
★ 3.8
(fi 6)(Spring/Summer,
3-0-3/2)
Force and torque generation in electric machines. AC and DC machines, permanent magnet synchronous (PMSM) and brushless DC motors (BLDC). Machine characteristics and dynamic models of electric actuators. Linear actuators; power electronics device characteristics; motor drives: H-bridges, inverters; speed control methods; power converters.
Accreditation Units
MCTR 360
★ 3.5
(fi 6)(Spring/Summer,
2-0-3)
A project-based course dealing with the design and implementation of a robotic system to accomplish a set of requirements. Integration of sensor technologies, sensor data processing, motion control based on feedback and real-time programming. Design procedures, ethics, safety and risk management, theory of engineering design, role of engineering analysis in design, application of computer-aided design software; component and material selection, codes, and standards; design optimization; system integration and verification through testing; teamwork, and a design project. Corequisite: MCTR 365.
Accreditation Units
MCTR 365
★ 3.5
(fi 6)(Spring/Summer,
2-0-3)
Mechatronic and robotic system design using CAD tools. Concepts of function structure models, material selection, and introduction of load and stress analysis. Integration of sensors and actuators. Simulation of mechanisms, dynamics, kinematics, and heat transfer using commercial software. Emphasis is on numerical model design including testing and verification methods, and the critical interpretation of the computed results. Design project aligned with MCTR 360.
Accreditation Units
MCTR 370
★ 3.0
(fi 6)(Spring/Summer,
3-0-0)
Fundamentals of machine learning methods. Supervised, unsupervised, and reinforcement learning concepts, and fundamentals of fuzzy logic. Review of probability and optimization. Linear regression. Linear classification and logistic regression. Components of modern machine learning approaches, including feature engineering, neural network models, training and evaluation methodology, and deep learning libraries. Object detection and object/human pose regression for robotic applications. Bias in machine learning algorithms. Corequisite: MCTR 399.
Accreditation Units
MCTR 399
★ 3.0
(fi 6)(Spring/Summer,
3-0-0)
Analytical and numerical methods with mechatronics applications. Complex numbers, partial differential equations, analytic functions, elementary functions, mappings, integrals, series, residues and poles, integral formulas. Statistical tests. Numerical integration and differentiation, solution methods of boundary value problems. Use of programming languages to implement numerical methods. Critical-thinking applied to problems related to mechatronics systems. Formulation, methodologies, and techniques for numerical solutions of engineering issues, particularly those arising within the field of mechatronics.
Accreditation Units
Fall Term 7
Comp. Elec.
A complementary elective of the student's choice. Please consult the calendar for more information.
ENG M 401
★ 3.0
(fi 6)(either term,
3-0-0)
The application of the fundamentals of engineering economics, financial analysis and market assessment to engineering alternatives in the planning, development and ongoing management of industrial enterprises. The course covers the use of engineering, economic, financial and market assessment information in investment and business operation decisions in technology oriented companies. Note: Credit cannot be obtained for more than one of ENGG 310, ENGG 401, ENG M 310, or ENG M 401.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| I | I | D |
Tech. Elec.
A program/technical elective of the student's choice. Please consult the calendar for more information.
Tech. Elec.
A program/technical elective of the student's choice. Please consult the calendar for more information.
MCTR 420
★ 3.8
(fi 6)(first term,
3-0-3/2)
System states and state space models. Linearization of nonlinear state-space models. Solving linear time-invariant state-space equations. Controllability and observability, and their algebraic tests. Minimal state-space realizations. State feedback and eigenvalue/pole assignment. Step tracking control design. State estimation and observer design. Observer-based control. Introduction to linear quadratic optimal control. Prerequisite: MCTR 320.
Accreditation Units
MCTR 460
★ 2.5
(fi 6)(first term,
1-0-3)
PART 1: Feasibility study and detailed design of a project which requires students to exercise creative ability, to make assumptions and decisions based on synthesis of technical knowledge, and devise new designs. Advanced design safety review.
Accreditation Units
Winter Term 8
ITS Elec.
An ITS elective of the student's choice. Please consult the calendar for more information.
ENGG 400
★ 1.0
(fi 2)(either term,
1-0-0)
The technical and professional duties and responsibilities of the engineer; the ethics of the engineering profession; technical and professional organizations. The role of the engineer in the social environment including elements of equity, concepts of sustainable development and environmental stewardship, public and worker safety and health considerations including the context of the Alberta Occupational Health and Safety Act. Note: Restricted to fourth-year traditional and fifth-year co-op engineering students. Must be taken in last term of program.
Accreditation Units
Graduate Attributes
| KB | PA | IN | DE | ET | TW | CS | PR | IS | EE | EP | LL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| D | A | D | A | A |
MCTR 421
★ 3.8
(fi 6)(second term,
3-0-3/2)
Review of probability, random variables, and stochastic processes. Recursive state estimation: Bayes filter, linear Kalman filter and its extension to nonlinear systems. Practical applications of filtering techniques to mechatronics systems. Prerequisite: MCTR 420.
Accreditation Units
MCTR 461
★ 2.5
(fi 6)(second term,
1-0-3)
PART 2: Feasibility study and detailed design of a project which requires students to exercise creative ability, to make assumptions and decisions based on synthesis of technical knowledge, and devise new designs. Advanced design safety review. Prerequisite: MCTR 460.
Accreditation Units
MCTR 465
★ 3.8
(fi 6)(second term,
3-0-3/2)
Introduction to mobile robots. Means of locomotion and kinematic and dynamic models. Linear and nonlinear motion control theory and filtering applied mobile robots. Map-based and reactive motion planning. Localization and mapping. Visual servoing. Prerequisite: MCTR 394. Corequisite: MCTR 421.
Accreditation Units
Tech. Elec.
A program/technical elective of the student's choice. Please consult the calendar for more information.
| M: | 220.5 | / | 195 | ✅ |
| NS: | 185.7 | / | 195 | ❌ |
| CS: | 113.4 | / | 225 | ❌ |
| ES: | 237.1 | / | 225 | ✅ |
| ED: | 33.9 | / | 225 | ❌ |
| M+NS: | 406.2 | / | 420 | ❌ |
| ES+ED: | 271.0 | / | 900 | ❌ |
| Total: | 790.6 | / | 1850 | ❌ |