[ Previous | Next | Contents | Glossary | Home | Search ]
AIX Version 4.3 Commands Reference, Volume 2

About This Book

This book is Volume 2 of the six-volume AIX Version 4.3 Commands Reference, SBOF-1877, which contains reference information on Advanced Interactive Executive (AIX) Operating System commands. It describes the tasks each command performs, how commands can be modified, how they handle input and output, who can run them and provides a master index for all six volumes.

For a quick reference list of commands arranged in functional groups, see Volume 6.

Who Should Use This Book

This book is intended for users of AIX commands.

How to Use This Book

A command is a request to perform an operation or run a program. You use commands to tell the AIX Operating System what task you want it to perform. When commands are entered, they are deciphered by a command interpreter (also known as a shell) and that task is processed.

Some commands can be entered simply by typing one word. It is also possible to combine commands so that the output from one command becomes the input for another command. This is known as pipelining.

Flags further define the actions of commands. A flag is a modifier used with the command name on the command line, usually preceded by a dash.

Commands can also be grouped together and stored in a file. These are known as shell procedures or shell scripts. Instead of executing the commands individually, you execute the file that contains the commands.

Some commands can be constructed using Web-based System Manager applications or the System Management Interface Tool (SMIT).

Highlighting

The following highlighting conventions are used in this book:

Bold Identifies commands, subroutines, keywords, files, structures, directories, and other items whose names are predefined by the system. Also identifies graphical objects such as buttons, labels, and icons that the user selects.
Italics Identifies parameters whose actual names or values are to be supplied by the user.
Monospace Identifies examples of specific data values, examples of text similar to what you might see displayed, examples of portions of program code similar to what you might write as a programmer, messages from the system, or information you should actually type.

Format

Each command may include any of the following sections:

Purpose A description of the major function of each command.
Syntax A syntax diagram showing command line options.
Description A discussion of the command describing in detail its function and use.
Flags A list of command line flags and associated variables with an explanation of how the flags modify the action of the command.
Parameters A list of command line parameters and their descriptions.
Subcommands A list of subcommands (for interactive commands) that explains their use.
Exit Status A description of the exit values the command returns.
Security Specifies any permissions needed to run the command.
Examples Specific examples of how you can use the command.
Files A list of files used by the command.
Related Information A list of related commands in this book and related discussions in other books.

Implementation Specifics

To list the installable software package (fileset) of an individual command use the lslpp command with the -w flag. For example, to list the fileset that owns the installp command, enter:

lslpp -w /usr/sbin/installp

Output similar to the following displays:

File                             Fileset                 Type
-----------------------------------------------------------------
/usr/sbin/installp                 bos.rte.install           File

To list the fileset that owns all file names that contain installp, enter:

lslpp -w "*installp*"

Output similar to the following displays:

File                             Fileset                 Type
-----------------------------------------------------------------
/usr/sbin/installp                 bos.rte.install           File
/usr/clvm/sbin/linstallpv          prpq.clvm                 File
/usr/lpp/bos.sysmgt/nim/methods/c_installp
                                   bos.sysmgt.nim.client     File

Syntax Diagrams

AIX command syntax is represented by syntax diagrams and usage statements.

Syntax diagrams are designed to provide information about how to enter the command on the command line. A syntax diagram can tell you:

AIX commands use the following conventions in their syntax diagrams:

The Sample Syntax Diagram illustrates the conventions used in syntax diagrams. Each part of the diagram is labeled. An explanation of the labels follows the diagram.

You interpret the example diagram as follows.

0 PATH LINE The path line begins the syntax diagram.
1 COMMAND NAME This item in the diagram is the name of the command you want to invoke. It is in bold, which indicates that it must be entered exactly as it appears in the diagram.

In the example diagram, the path branches into two paths after the command name. You can follow either the lower path (discussed in item 2) or the upper path (discussed in item 3).

2 SINGLE CHOICE BOX If you follow the lower path, you encounter a box with the words one of over it. You can choose only one item from this box.
3 DEFAULT LINE If you follow the upper path, you bypass the single choice box, and enter nothing. The bold line around the box is a default line, which means that you do not have to enter anything from that part of the diagram. Exceptions are usually explained under "Description." One important exception, the blank default line around input and output files, is explained in item 10.
4 REPEAT ARROW When you follow a path that takes you to a box with an arrow around it, you must choose at least one item from the box. Then you can either follow the arrow back around and continue to choose items from the box, or you can continue along the path. When following an arrow that goes around a box (rather than an arrow that includes several branches in the diagram), do not choose the same item more than once.
5 REQUIRED ITEM Following the branch with the repeat arrow is a branch with three choices and no default line around them. This means that you must choose one of A, B, or C.
6 GO TO NEXT LINE If a diagram is too long to fit on one line, this character tells you to go to the next line of the diagram to continue entering your command. Remember, the diagram does not end until you reach the vertical mark.
7 CONTINUE DIAGRAM This character shows you where to continue with the diagram after it breaks on the previous line.
8 OPTIONAL PARAMETER If a flag can (but does not have to) take a parameter, the path branches after the flag. If you cannot enter a space between the flag and parameter, you are told in a footnote.
9 DEFAULT VALUE Often, a command has default values or actions that it will follow if you do not enter a specific item. These default values are indicated in normal font in the default line if they are equivalent to something you could enter on the command line (for example, a flag with a value). If the default is not something you can enter on the command line, it is not indicated in the diagram.
Note: Default values are included in the diagram for your information. It is not necessary to enter them on the command line.
10 INPUT OR OUTPUT A command that can read either input files or standard input has an empty default line above the file parameter. If the command can write its output to either an output file or to standard output, it is also shown with an empty default line above the output file parameter.

If a command can read only from standard input, an input file is not shown in the diagram, and standard input is assumed. If a command writes only to standard output, an output file is not shown in the diagram, and standard output is assumed.

When you must supply a file name for input or output, the file parameter is included in the diagram without an empty default line above it.

11 FOOTNOTE If a command has special requirements or restrictions, a footnote calls attention to these differences.
12 VERTICAL MARK This ends the syntax diagram.

Running Commands in the Background

If you are going to run a command that takes a long time to process, you can specify that the command run in the background. Background processing is a useful way to run programs that process slowly. To run a command in the background, you use the (ampersand) operator at the end of the command:

Command&

Once the process is running in the background, you can continue to work and enter other commands on your system.

At times, you might want to run a command at a specified time or on a specific date. Using the cron daemon, you can schedule commands to run automatically. Or, using the at and batch commands, you can run commands at a later time or when the system load level permits.

Entering Commands

When you work with AIX, you typically enter commands following the shell prompt on the command line. The shell prompt can vary. In the following examples, $ is the prompt.

To display a list of the contents of your current directory, you would type ls and press the Enter key:

$ ls 

When you enter a command and it is running, the operating system does not display the shell prompt. When the command completes its action, the system displays the prompt again. This indicates that you can enter another command.

The general format for entering AIX commands is:

Command Flag(s) Parameter

The flag alters the way a command works. Many commands have several flags. For example, if you type the -l (long) flag following the ls command, the system provides additional information about the contents of the current directory. The following example shows how to use the -l flag with the ls command:

$ ls -l

A parameter consists of a string of characters that follows a command or a flag. It specifies data, such as the name of a file or directory, or values. In the following example, the directory named /usr/bin is a parameter:

$ ls -l /usr/bin

When entering commands in AIX, it is important to remember the following:

When certain commands are entered, the shell prompt changes. Because some commands are actually programs (such as the telnet command), the prompt changes when you are operating within the command. Any command that you issue within a program is known as a subcommand. When you exit the program, the prompt returns to your shell prompt.

AIX can operate with different shells (for example, Bourne, C, or Korn) and the commands that you enter are interpreted by the shell. Therefore, you must know what shell you are using so that you can enter the commands in the correct format.

Stopping Commands

If you enter a command and then decide to stop that command from running, you can halt the command from processing any further. To stop a command from processing, press the Interrupt key sequence (usually Ctrl-C or Alt-Pause). When the process is stopped, your shell prompt returns and you can then enter another command.

ISO 9000

ISO 9000 registered quality systems were used in the development and manufacturing of this product.

AIX 32-Bit Support for the X/Open UNIX95 Specification

Beginning with AIX Version 4.2, the operating system is designed to support the X/Open UNIX95 Specification for portability of UNIX-based operating systems. Many new interfaces, and some current ones, have been added or enhanced to meet this specification. Beginning with Version 4.2, AIX is even more open and portable for applications.

At the same time, compatibility with previous AIX releases is preserved. This is accomplished by the creation of a new environment variable, which can be used to set the system environment on a per-system, per-user, or per-process basis.

To determine the proper way to develop a UNIX95-portable application, you may need to refer to the X/Open UNIX95 Specification, which can be obtained on a CD-ROM by ordering the printed copy of AIX Version 4.3 Commands Reference, order number SBOF-1877, or by ordering Go Solo: How to Implement and Go Solo with the Single Unix Specification, order number SR28-5705, a book which includes the X/Open UNIX95 Specification on a CD-ROM.

AIX 32-Bit and 64-Bit Support for the UNIX98 Specification

Beginning with AIX Version 4.3, the operating system is designed to support the X/Open UNIX98 Specification for portability of UNIX-based operating systems. Many new interfaces, and some current ones, have been added or enhanced to meet this specification. Making AIX Version 4.3 even more open and portable for applications.

At the same time, compatibility with previous AIX releases is preserved. This is accomplished by the creation of a new environment variable, which can be used to set the system environment on a per-system, per-user, or per-process basis.

To determine the proper way to develop a UNIX98-portable application, you may need to refer to the X/Open UNIX98 Specification, which can be obtained on a CD-ROM by ordering the printed copy of AIX Version 4.3 Commands Reference, order number SBOF-1877, or by ordering Go Solo: How to Implement and Go Solo with the Single Unix Specification, order number SR28-5705, a book which includes the X/Open UNIX98 Specification on a CD-ROM.

Related Information

The following books contain information about or related to commands:

The following books also may be helpful:

Ordering Publications

You can order publications from your sales representative or from your point of sale.

To order additional copies of this book, use order number SC23-4116.

To order additional copies of all six volumes of AIX Version 4.3 Commands Reference, use Order Number SBOF-1877.

Use AIX and Related Products Documentation Overview for information on related publications and how to obtain them.


[ Previous | Next | Contents | Glossary | Home | Search ]