Respond to Screen Messages

AIX Version 4.3 Problem Solving Guide and Reference

Respond to Screen Messages

Respond to and recover from screen messages by doing the following:

If the terminal displays any error messages, look up the messages in the AIX Version 4.3 Messages Guide and Reference.

Make sure the DISPLAY environment variable is set correctly. Use either of the following methods to check the DISPLAY environment:
- Use the setsenv command to display the environment variables.
```
setsenv
```
  The setsenv command displays the protected state environment when you logged in.
  
  Determine if the DISPLAY variable has been set. In the following example, the DISPLAY variable does not appear, which indicates that the DISPLAY variable is not set to a specific value.
```
SYSENVIRON:
NAME=casey
TTY=/dev/pts/5
LOGNAME=casey
LOGIN=casey
```
  OR
- Change the value of the DISPLAY variable. For example, to set it to the machine named bastet and terminal 0, enter:
```
DISPLAY=bastet:0
export DISPLAY
```
  If not specifically set, the DISPLAY environment variable defaults to unix:0 (the console). The value of the variable is in the format name:number where name is the host name of a particular machine, and number is the X server number on the named system.
Reset the terminal to its defaults using the following stty command:
```
stty sane
```
The stty sane command restores the "sanity" of the terminal drivers. The command outputs an appropriate terminal resetting code from the /etc/termcap file (or /usr/share/lib/terminfo if available).
If the Return key does not work correctly, reset it by entering:
```
^J stty sane ^J
```
The ^J represents the Ctrl-J key sequence.
If your screen does not return to normal operation after you complete the preceding procedures, follow the diagnostic procedures in "Hardware Diagnostics" .